A4Tech Bloody R70 User manual

2.4G RF Gaming Mouse
(Light Strike Wireless Gaming Mouse)
User Manual
Model:R70
www.bloody.com

Federal Communications Commission Requirements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.



System Requirement
Operate System: Windows XP/Vista/7/8/10
Hardware: PC system compatible

DefinetheMouseButtons:



L‐ButtonR‐Button
WheelandMiddle‐button1mode(standardmode)button
Nmode(firstgunmodel)button
3mode(secondgunmodel)button
4thButton
5thButton
MicroUSBhole(charginghole)


Pair the Mouse or Keyboard with "Bloody Gaming Family "
1. Plug the Dongle of Bloody Series to USB port.
2. Follow below steps to pair wireless mouse or keyboard.
3. When connect successfully , you can use your keyboard or mouse.

Power-saving Management
1. Click the icon at the system tray and select GUARD to manage the Power Management of mouse.
2. Software Low battery inform：Low battery informs will pop up at the right corner of your screen when battery low.
(LowBattery)
3. How to charge this Mouse:
RF Mouse Status
The Charging LED indicates:
-Low battery: the LED of wheel will be
flicker (15sec). You could plug the USB
cable in USB port of PC.
-Charging mode: When the cable connect to
mouse, the LED of wheel keep red
message. If the Lithium battery is full
charged, the LED will be breathing light
message.

ToPC,USBport.
ChargingLEDindicates.

GamingMouseSoftwareIntroduction:
Bloody‐HeadShotFirearmAdjustments
Features:
BeforeplayingFPSgames,youmayuseArmoryintheHEADSHOTprogramtoadjustfirearmsandsavethemtothemousememory.DependingonFPSgamesandfirearmfeatures,there
are“5‐Gun‐Adjust”modesyoumayselect,e.g.,[A‐Burst],[B‐Strafe],[C‐Machine],[D‐In_Game]and[M‐Macro]respectively.Forinstance,inthegamesessionwhileagunorarifleis
pickedup,withoutquittingthegame,youmayuse[D‐In_Game]modetoperformgunadjustments,toenhancethegun’sfirepowerwithconcentratedballisticsandimprovedaccuracy
toincreasetheheadshotrate.
Select
g
amefolder
FirearminArmory?
No
Controlkeysetup:Selectthefirearm
andsetu
p
Nor3button forL‐ke
y
Click“APPLY”tosaveabovesettingsto
themousememory
Inthegameplay,pressN/3key,thewheel
LEDwillchangetogreen(N)oryellow(3).
Pressleftbuttontotestthefirearm.Ifit
doesnotmeetyoursatisfaction,gobackto
theHEADSHOT andre‐setu
p
.
Armory
Yes
Useeitherwaytocreate:
ImportfirearmdatatoArmory
Use5‐waygun‐adjusttosetupanew
gun and save to Armory

Notice: To ensure that your keyboard sends and receives perfectly, please read below instructions for your reference:
1 Avoid Interference from iron panel of PC.
Please plug the Dongle USB Ports.
2.Avoid using the wireless keyboard/mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency transmission and slow down the response time of keyboard or mouse ,or cause the
keyboard /mouse to fail temporarily.
3. If electromagnetic interference resulting from the use of shorter, you can add the following extend cable to reduce Receiver and Mouse distance, to modify quality of the received signals.
The radio frequency is 2.4GHZ, it is safe for our bodies, but please be cautious in using cardiac pacemaker or other body auxiliary instruments.
Troubleshooting
If the keyboard/mouse is not working:
1. Make sure the keyboard/mouse was paired .
2. Check battery power is full.
3. Check Dongle(receiver) installation.
4. Try another USB port.

Product Support
Need help with technical support? Please go to: http://www.bloody.com and our support team will respond within 72 hours.
**All pictures and description mentioned above is for reference only and is subject to change without notice.

