Advantech Fpm-37t User manual

FPM-37T/S

Flat Panel Monitor with

13.8" Color TFT/DSTN Display

This document is copyrighted by Advantech Co., Ltd. All rights are

reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time.

Specifications are thus subject to change without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd., assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

All brand and product names mentioned herein are trademarks or

registered trademarks of their respective holders.

FCC Class A

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy. If not installed and used in accordance with this

user's manual, it may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Part No. 2002037000

1st Edition Printed in Taiwan June 1998

iii

Packing List

Before installing your equipment, make sure that the following

materials have been received:

• FPM-37T/S

• Accessory pack, including:

- FPM-37T/S User's Manual

- PCA-6654 User's Manual

- PCA-6654 disks

- PCA-6654 video display card

- Component bag

- Screw bag

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

Additional Information and Assistance

1. Visit the Advantech web sites at www.advantech.com or

www.advantech.com.tw where you can find the latest

information about the product.

2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need

additional assistance. Please have the following information ready

before you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version,

application software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to

the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE

EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.

Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient

ein angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein

Kippen oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät

vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht

abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber

fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten

Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-

nung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder

Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.

elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der

elektrischen Sicherheit nur von authorisiertem Servicepersonal

geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu

trennen und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend

funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesse-

rung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt

70dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Contents

Chapter 1 Introduction..................................... 1

1.1 Introduction............................................................................2

1.2 Specifications..........................................................................3

1.3 Flat Panel Displays ................................................................4

1.4 Connectors..............................................................................5

1.4 Dimensions..............................................................................7

Chapter 2 System Setup.................................. 9

2.1 Wall Mounting .....................................................................10

2.2 Panel Mounting ....................................................................11

2.3 Exploded Diagram ...............................................................12

Appendix A

Touchscreen Driver Installation .................... 13

A.1 Introduction.........................................................................14

A.2 Windows 95..........................................................................15

A.3 Windows 3.1 and DOS........................................................18

A.4 Windows NT ........................................................................21

A.5 OS/2 (MonitorMouse).........................................................23

Introduction

This chapter includes:

• Introduction

• Specifications

• Flat Panel Displays

• Connectors

• Dimensions

CHAPTER

FPM-37T/S User's Manual

1.1 Introduction

Advantech's FPM-37T/S series are 13.8" color TFT/DSTN LCD flat

panel monitors for industrial applications. They are made small and

lightweight to fit anywhere. Their aluminum front panel is compliant

with NEMA 4/12 (IP52/56).

The FPM-37T/S series comes with a dedicated PCI-bus video display

card. A sheilded 1.8 m cable is provided for remote operation.

The flat panel monitor package includes a PCI-bus video display card

and your choice of flat panel displays: color TFT or DSTN LCD. The

display card supports simultaneous use of LCD panels and analog

CRT monitors. A shielded 1.8 meter cable connects the FPM-37T/S

and the video display card, allowing remote operation. Add an

optional touchscreen to create the ultimate user interface. The

FPM-37T/S's compact size and extended range allow easy placement

in almost any location.

Chapter 1 Introduction

1.2 Specifications

General

• Construction: Heavy-duty aluminum and steel chassis

• Front panel: NEMA 4/12 (IP 52/56)

• Control: One brightness/contrast adjustment knob on rear side

• Mounting: Panelmount or wallmount

• Dimensions (W x H x D): 402 x 302 x 54 mm (15.8" x 11.9" x 2.1")

• Weight: 4.2 kg (9.2 lb)

Video Display Card (PCA-6654)

• Model: PCA-6654

• Type: Half-size 32-bit PCI-bus

• Video Chip: CHIPS 65550

• DRAM: On board 2 MB, frame buffer 512 KB (optional)

• Max. Resolution: 1024 x 768 for both flat panels and CRT displays

• Connectors: One MDR-26 connector for flat panel display

One DB-15 connector for CRT monitor

• Simultaneous CRT/LCD display

• Power Consumption: +5 V @ 1 A, max.

Touchscreen (Optional)

• Type: Analog resistive

• Resolution: transmission @ 75%

• Controller: RS-232 interface

• Power Consumption: +5 V @ 200 mA

• Software drivers: DOS, Windows 3.1/95/NT and OS/2

• Life cycle: 35 million touches

• Surface: Meets ASTM-D-1044 standard (Taber Abrasion Test)

FPM-37T/S User's Manual

1.3 Flat Panel Displays

Model FPM-37T FPM-37S

Display Type TFT Color LCD DSTN LCD

Size (diagonal) 13.8" 13.8"

Max. Resolution 1024 x 768 1024 x 768

Max. Colors 256 K colors 4096 colors

Viewing Angle 110° 60°

Dot Size (mm) 0.273 x 0.273 0.198 x 0.248

Luminance (cd/m2) 200 200

LCD Model Sharp LQ14X03E

or compatibles Sharp LM14X82

or compatibles

Temperature 0 ~ 50° C 0 ~ 45° C

VR Controls Brightness Contrast

Simultaneous Mode Yes Yes

LCD MTBF 50,000 hours 50,000 hours

Backlight MTBF 25,000 hours 25,000 hours

Chapter 1 Introduction

1.4 Connectors

The following connectors are situated on the left hand side of the

FPM-37T/S:

Video I/O Port (MDR-26)

This connector links the FPM-37T/S to the PCA-6654 display card.

Figure 1-1 shows how to connect the MDR-26 of the PCA-6654.

Note: The display card provides power to the FPM-37T/S;

no external power is required.

Warning: Make sure that your display card corresponds with

your choice of display!

Touchscreen Connector (DB-9) (Optional)

This connector will be present only if a touchscreen is installed. It

must be connected to the RS-232 port of the PC. The touchscreen

cable is included with all orders which include the touchscreen option.

External Keyboard Connector

The FPM-37T/S provides an external keyboard connector to let you

attach a PC/AT standard keyboard. Figure 1-1 shows the correct

wiring method. Be sure the internal keyboard connector between

PCA-6654 (EXT.KBD) and the CPU card (KBD) has been connected.

FPM-37T/S User's Manual

Figure 1-1: Connectors

Chapter 1 Introduction

1.5 Dimensions

Figure 1-2: Dimensions

FPM-37T/S (13.8")

Unit: mm

Cutout Dimensions: 373 mm x 273 mm

FPM-37T/S User's Manual

System Setup

• Wall Mounting

• Panel Mounting

• ExplodedDiagram

CHAPTER

FPM-37T/S User's Manual

2.1 Wall Mounting

When the FPM-37T/S assembly is complete, the unit may be mounted

in a panel or on a wall. Mounting brackets and fix brackets are

supplied for convenient wall mounting. The screw holes are used to

secure the large mounting bracket to the wall. Connect the FPM-37T/S

to the bracket using the three screws included. After attaching the

FPM-37T/S to the bracket, use the fix bracket to stabilize the unit.

Figure 2-1: Wall mounting

Chapter 2 System Setup

2.2 Panel Mounting

A cutout can be made to accommodate panel mounting. Four

panel-mount brackets are included with the FPM-37T/S. Slide the unit

backwards into the panel opening. Attach the four mounting brackets

by inserting the screws into the keyhole slots on the flat panel monitor

cover. Use the screws to secure the brackets to the cover. Tighten to

secure the front panel monitor against the back panel.

Figure 2-2: Panel mounting

FPM-37T/S User's Manual

2.3 Exploded Diagram

Remove the six screws as shown, then lift the rear panel from the unit.

Internal components are as shown below:

Figure 2-3: Exploded diagram

Touchscreen Driver

Installation

• Introduction

• Windows 95

• Windows 3.1 and DOS

• Windows NT

• OS/2 (MonitorMouse)

APPENDIX

FPM-37T/S User's Manual

A.1 Introduction

Before you attempt to install the touchscreen driver, you should

carefully read the instructions in the relevant "read me" file stored in

the installation CD-ROM. The file path for the instructions in the

CD-ROM is:

D:\monmouse\

This is where you will find instructions for Win 95, DOS 3.1, Win

NT, and OS/2.

Note 1: The touchscreen driver must be installed from the

CD-ROM supplied.The CD-ROM drive is designated

as "D" throughout this chapter.

Note 2: The installation instructions assume that the

touchscreen is connected to COM1, and that the

mouse is connected to and set for COM2.Both of

these configurations are factory pre-settings.

Note 3: The following illustrations of windows are examples

only.You must follow this manual's flowchart

instructions, and pay attention to the instructions

which then appear on your screen.

This manual suits for next models

Table of contents

Advantech FPM-37T User manual