AIO Jet G1P User manual

User Manual AIOJet G1P Intelligent
investment AIO machine
content
Precautions
1. Product introduction
one. Product List
two. Description of equipment parts and functions
2. Operation method
A. Computer Mode
one. Boot and enter Windows system
two. Focus Adjustment / Short Throw Projection
three. PC/HDMI input switching mode
Four. External headphone speaker
Fives. WIFI&Bluetooth connection settings
six. Volume adjustment/sound settings
seven. Mirror left and right / mirror up and down
3. Main SpecificationsPrecautions In order to avoid unnecessary damage, please pay

attention to the following information before use
·Avoid looking directly at the strong light During the use of the device, please do
not look directly at the projection light source of the optical camera lens to avoid
damage to the eyes.
·Do not block the lens During the use of the device, do not block the optical lens
with any object.
·Stable placement Please place the device on a stable level table when using it to
avoid damage caused by falling.
Heat dissipation When the device is in use, you may feel hot air coming out of the
vents, which is a normal heat dissipation phenomenon.
Non-design and production defects.
·Prohibition of covering products Do not place the device on soft items such as
quilts, blankets, etc., and do not cover it with other objects.
So as not to affect the heat dissipation, cause the device temperature to be too high
to cause automatic shutdown or affect the normal use of the product.
·Place location Do not place the device in a place where the temperature is too high
or humid, and do not place it in a place with dust or smokein order to avoid
contamination or damage to the optics and shorten the life of the equipment.
·Accessories Please use the original power adapter and accessories, do not use the
products that are not matched.
·Water resistance This device is not waterproof, please keep it dry.
•Activation code If the device comes with an OS activation code, it cannot be
returned or exchanged after it is activated.
After-sale precautions Please read the above precautions in detail. If the device is
not used according to the instructions in this manual, the Damage or poor operation

will not be repaired or repaired for a fee. Other accessories products, need to
consult after-sales service
Special line, buy original accessories to protect the normal use of the equipment.
1.Product introduction
(1)The product list contains the following items
(2)．Equipment parts and function description

2. Operation Method
A.PC
1．Enter Windows system
(1) All-in-one power supply: connect the power adapter to the power cord jack of
the all-in-one machine, insert the adapter plug into the power socket, and turn it on
immediately
(2) Boot screen: After booting, you will see the SHOU brand boot screen.
(3) Computer mode startup: The power startup is the computer (PC) switch key.
Press this key to start the computer function.
(4) When the windows screen appears, the boot is completed, and any
operation of the computer can be started.
(5) Opto-mechanical on-off switch
2．Focusing/Short throw
(1) Focus adjustment: When the playback distance of the all-in-one machine changes and the picture is blurred, you
can press the focus button on the remote control to move forward Focus + or , moving the lens until the image
becomes clear.
(2) Autofocus: You can use the autofocus function when the screen is blurred. Press the button to start the
autofocus.
3．PC/HDMI
(1) HDMI interface: tablet computers, laptops, TV boxes, game consoles, and some mid-to-high-end mobile phones
PC
Projector

can be connected to the HDMI of the all-in-one computer with an HDMI cable
Signal source selection:
A. Other devices are directly connected to the HDMI IN input for projection
After the all-in-one is powered on, when the computer mode is not turned on, NO SIGNAL will appear on the screen. At
this time, other devices use HDMI After the cable is connected to the all-in-one machine, press the button to
project.
B. Switch the key to return to the computer (PC) mode and turn to the computer system screen.
4．Connect Earphone to Sound Box HDMIIN Interface
(1) Insert the earphone or sound box terminal into AUX output interface to enjoy peripheral earphone or sound box。
(2) Bluetooth function is available for this AIO machine, which enables it to set Bluetooth earphone and Bluetooth
sound box
5．WIFI & Bluetooth Connection Setting
6．Volume Adjustment/Sound Setting

(4) Remote control
Loud Volume
Low Volume
Volume Mute
七．Mirror left and right / Mirror up and down
1. left and right
2. up and down
3. Main Specifications
Processor: Intel Core® i7 8565U quad-core processor Memory Memory: 8G
Storage: 512G SSD
ANSI Lumens: 1000 ANSI Lumens
Physical Resolution: 1080P (Support 4K)
Short Throw: 1M 60 " 1.5M 100 "
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:-- Reorient or relocate the receiving
antenna. -- Increase the separation between the equipment and receiver. -- Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. --
Consult the dealer or an experienced radio/TV technician for help.This device complies with
part 15 of the FCC Rules.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment