Airsight XX40A User manual

Outdoor Wireless/Wired
IP Network Pan/Tilt/Zoom Camera
Model XX40A
User Manual


2
CONTENTS
1. INTRODUCTION ..........................................................................................................................................3
1.1 FEATURES .............................................................................................................................................................................................3
1.2 PACKING LIST .......................................................................................................................................................................................3
1.3 PRODUCT VIEWS...................................................................................................................................................................................4
1.4 PC SYSTEM REQUIREMENTS .................................................................................................................................................................5
1.5 HARDWARE INSTRUCTION.....................................................................................................................................................................5
1.6 SOFTWARE INSTALLATION.....................................................................................................................................................................5
2. SOFTWARE OPERATION...........................................................................................................................8
2.1 IPCAMERA TOOL..................................................................................................................................................................................8
2.2 CAMERA LOGIN .................................................................................................................................................................................. 11
2.3 FOR IE BROWSER................................................................................................................................................................................13
2.4 FOR SAFARI,FIREFOX,GOOGLE BROWSER .........................................................................................................................................15
2.5 FOR MOBILE PHONE ...........................................................................................................................................................................16
2.6 ACTIVEXMODE (FOR IE BROWSER) ..................................................................................................................................................16
2.7 FOR VISITOR .......................................................................................................................................................................................16
2.8 FOR OPERATOR ...................................................................................................................................................................................20
2.9 FOR ADMINISTRATOR.......................................................................................................................................................................... 22
3. SETTINGS AS ADMINISTRATOR.............................................................................................................23
3.1 MULTI-DEVICE SETTINGS ................................................................................................................................................................... 23
3.2 NETWORK SETTINGS........................................................................................................................................................................... 28
3.3 BASIC NETWORK SETTINGS ................................................................................................................................................................28
3.4 WIRELESS LAN SETTINGS ...................................................................................................................................................................30
3.5 ADSLSETTINGS .................................................................................................................................................................................32
3.6 UPNPSETTINGS..................................................................................................................................................................................32
3.7 DDNS SERVICE SETTINGS ..................................................................................................................................................................33
3.8 SYSTEM SETTINGS .............................................................................................................................................................................. 37
3.9 ALIAS SETTINGS .................................................................................................................................................................................38
3.10 DATE &TIME SETTINGS.....................................................................................................................................................................38
3.11 USERS SETTINGS...............................................................................................................................................................................39
3.12 PAN/TILT/ZOOM (PTZ) SETTINGS .....................................................................................................................................................40
3.13 INDICATOR SETTINGS........................................................................................................................................................................ 40
3.14 BACKUP &RESTORE .........................................................................................................................................................................40
3.15 OTHER SETTINGS ..............................................................................................................................................................................42
3.16 MAIL SERVICE SETTINGS .................................................................................................................................................................. 42
3.17 FTPSERVICE SETTINGS ....................................................................................................................................................................44
3.18 ALARM SERVICE SETTINGS ............................................................................................................................................................... 45
3.19 SEND MAIL ON ALARM .....................................................................................................................................................................48
3.20 PATH SETTINGS .................................................................................................................................................................................50
3.21 SERVER PUSH MODE (FOR SAFARI,FIREFOX,GOOGLE BROWSER)...................................................................................................51
3.22 SIGN IN MOBILE PHONE .....................................................................................................................................................................52
4. APPENDIX .................................................................................................................................................53
4.1 FREQUENTLY ASKED QUESTIONS........................................................................................................................................................ 53
4.2 DEFAULT PARAMETERS ....................................................................................................................................................................... 55
5. Specifications ...........................................................................................................................................56
6. OBTAINING TECHNICAL SUPPORT ....................................................................................................... 57


3
1. INTRODUCTION
This is an integrated wireless IP Camera solution. It combines a high quality digital Video Camera with network
connectivity and a powerful web server to bring clear pictures to your Desktop from anywhere on your local
network or over the Internet.
The main function of the camera is to transmit remote video over IP network. The high quality video image can
be transmitted with 30fps speed on the LAN/WAN by using MJPEG hardware compression technology.
It is based on the TCP/IP standard, build-in WEB server which supports Internet Explorer. Therefore the
management and maintenance of your camera becomes simple by using the network to achieve the remote
configuration, start-up and to upgrade firmware.
You can use your IP Camera to monitor your home or your office. Also, controlling and managing images are
simple by visiting the web site.
1.1 Features
☆Powerful high-speed video protocol processor
☆High-sensitivity 1/4’’ CMOS sensor
☆Picture total 300K pixels
☆Supports Pan/Tilt/Zoom (PTZ) control, Pan 355°, Tilt 90° 3x Optical Zoom
☆Optimize MJPEG video compression for transmission
☆Multi-level user management and passwords definition
☆Embed Web Server for users to visit by IE
☆Supports wireless network (WI-FI/802.11/b/g)
☆Supports Dynamic IP (DDNS) and UPNP LAN and Internet (ADSL, Cable Modem)
☆Gives an alarm in case of motion detection
☆Supports image snapshot
☆Supports multiple protocols：HTTP TCP/IP UDP SMTP DDNS SNTP DHCP FTP
☆Supports WEP/WPA/WPA2 encryption
☆Supports 3G phone, Smart phone control and surveillance
☆Supports IE, Firefox, Safari, and Google chrome browsers.
1.2 Packing List
Please check that the following items are included:
●IP Camera
●Wi-Fi Antenna
●User Manual & Quick Setup Guide
●DC Power Supply
●CD
●Network Cable
●Mounting bracket


4
1.3 Product Views
1.3.1 Front View
Figure 1.1
1 Wireless Antenna: WI-FI Antenna (rotate to vertical position as shown above).
2 Housing: Alloy waterproof housing.
3 LENS: CMOS sensor with fixed zoom lens.
.
1.3.2 Cable Interface
Figure 1.2
Audio Output: The jack is used to connect an external speaker or audio output device.
Audio Input: The jack is used to connect an external microphone or audio input device.
I/O Alarm Pin: 1 Alarm input (GND) 2 Input 3 Output A 4 Output B.
Network Interface: RJ-45/10-100 base T.
Network Light: The green LED will be on when the network is connected, the yellow LED will blink when data
is transferred.
Reset: If you press and hold the RESET button for about 30 seconds, all the parameters will be set back to the
factory default settings. (Please keep the power on when doing a RESET).
Power: DC 12V/2A power supply.


5
1.4 PC System Requirements
System configuration requirements:
CPU: 2.06GHZ or above.
Memory: 256M or above.
Network Card: 10M or above.
Display Card: 64M or above memory.
Recommended Operating system: Windows XP, Windows Vista, Windows 7.
1.5 Hardware Instruction
Follow the steps below to set up your camera hardware.
1. Install the Wi-Fi antenna.
2. Plug the power adaptor into the camera and into an AC outlet.
3. Plug the network cable into the camera and router/switch.
4. It takes approx 30 seconds to boot up the camera, then you will find the IP address from “IP Camera Tool”
(Figure 1.8).
5. When the power is on and the network cable is connected, the green LED on the rear panel will stay on.
The yellow LED will keep flashing, and the Indicator LED on the front of the camera will flash. (The indicator
LED can be controlled by software).
Figure 1.3
1.6 Software Installation
Attention:In order to make the installation correctly, we suggest that you turn off your Firewall and Antivirus
software before installing ActiveX. Correct software installation is essential to the successful use of this
product. Install the following software:
1. IP Camera Tool: Open the CD, double click “IPCamSetup.exe” then click next to complete the
software installation. (Figure 1.5, 1.6, 1.7).


6
2. ActiveX: Double click “Appinstall.exe”—“Next”—“Install”—“Finish”.
Figure 1.4
Figure 1.5
Figure 1.6


7
Figure 1.7
After this is done, the icon “IP Camera Tool” will be displayed on your desktop.
CAUTION: Before installing and using the product, please read the following precautions carefully and make
sure they are fully understood.
Use only the power adaptor included with the product. Use of an unauthorized power adapter may cause
damage to your IP Camera.
Do not touch the lens of the IP Camera. The optimum focus range has been set for you. If you turn the lens, it
may cause incorrect focus and blurry images.
Do not turn the Pan/Tilt mechanism by force, it may cause damage to internal components of the Pan/Tilt
mechanism.
For firmware upgrading or connection with an external device, refer to detailed instructions contained in the
CD


8
2. SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double-click the Icon “IP Camera Tool”
and a dialog box shown in Figure 1.8 will pop up.
Figure 1.8
Note: The software searches IP Servers automatically over your LAN. There are 3 cases:
1. No IP Cameras found within LAN. After about 1 minute search, the Result Field will show “not found IP
Server” and the program shut down automatically.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is
displayed in the result field as shown in Figure 1.8.
3. The IP Cameras installed within LAN do not share the same subnet with the monitoring PC. A prompt will
be shown in result field (prompt: Subnet doesn’t match, double click to change!). Click the left mouse
button to choose the prompt and click the right mouse button, choose Network Configuration to set the
static IP address of the Camera to the same subnet as your LAN. (Figure 2.2).
NOTE: If it shows” Subnet doesn’t match, double click to change!” you can also choose ”Obtain IP from
DHCP Server” to get a dynamic IP. (Figure 2.1).
2.1.1 Six Options
Choose the IP Camera list and Click the right mouse button, there are six options: (Figure 1.9).
Basic Properties, Network Configuration, Upgrade Firmware,
Refresh Camera List, Flush Arp Buffer, About IP Camera Tool.


9
Figure 1.9
2.1.1 .1 Basic Properties
There is some device information in the Basic Properties, such as Device ID, System Firmware Version, and
Web UI Version.（Figure 2.0).
The Device ID is the camera’s MAC ID, which should be the same as shown on the sticker on the bottom of
the camera. Every camera has a unique MAC ID. So if there are many IP addresses shown in the list, check
the MAC ID on the bottom of the camera, so you can ensure which camera it is.
Sometimes, if there is no IP address shown on the IP Camera tool, it could be blocked by a firewall, in this
case you need to add the MAC ID to the router, and give it a fixed IP or add the MAC ID as a trusted site.
There are two MAC Addresses, one is the Device MAC ID, the other is the WIFI MAC ID.
WIFI MAC ID, you can find it on the sticker on the bottom of the camera, you can also login to your WIFI router,
check the host status, which will show all the WIFI devices connected to your router, you can also find the
IPCAM’s WIFI MAC ID there.
Figure 2.0


10
2.1.1.2 Network Configuration
Below shows how you can configure the Network parameters.
Figure 2.1
Obtain IP from DHCP server: If clicked, the device will obtain IP from DHCP server. In other words, the
camera will have a dynamic IP. (Make sure the Router which the camera connects to has DHCP function and
DHCP is enabled). (Figure 2.1).
Figure 2.2
IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gateway, and the
subnet should be the same as your computer or router. (I.e. the first three sections are the same).
Subnet Mask: The default subnet mask of the equipment is: 255.255.255.0. You can find the subnet mask
from your PC or router.
Gateway: Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your router.
DNS Server: IP address of ISP network provider. You can also set it to the same as the Gateway.
NOTE: You can find the Subnet Mask, Gateway, and DNS Server from your router, or check the local
connection status of your computer, to get all the parameters. Normally two DNS servers are optional.
Http Port: LAN port assigned for the equipment, default is 80. You could set another port number like 81, 801,
8001 etc.
User: Default administrator username is: admin (please make sure all are lowercase letters).
Password: Default password is bank, i.e. no password.
NOTE: If the prompt “subnet doesn’t match, double chick to change!” appears, please set the IP Address,
Subnet Mask, Gateway,DNS Server once again, or enable Obtain IP from DHCP server.