Airzone Easyzone AZEZ6MELAM01S3V User manual

Quick guide
Easyzone
EN
ES
FR
IT
PT
DE

23 °
.5
30%
ZONE 01
26.0º
CN105
F1 F2 F3 F4
20ºC
21ºC 21ºC
12:00
1
2 x 0.22 + 2 x 0.5 mm2
2
2 x 0.22 + 2 x 0.5 mm2
4
2 x 0.34 mm23 x 1.5 mm2
Neutro I Neutral I Neutro I Neutre I Neutro I Neutralleiter
Fase I Phase I Fase I Phase I Fase I Phase
Tierra I Ground I Terra I Terre I Terra I Schutzleiter
3
Blanco I White I Branco I Blanc I Bianco I Weiß
Marrón I Brown I Marrom I Brun I Marrone I Braun
Azul I Blue I Azul I Bleu I Blu I Blau
Verde I Green I Verde I Vert I Verde I Grün
Negro I Black I Negro I Noir I Nero I Schwarz Rojo I Red I Vermelho I Rouge I Rosso I Rot
AZCE6BLUEZERO AZCE6LITEC AZCE6LITEC
1
2
34
AZX6QADAPT3MEL
AZCE6IBPRO6

Content
Environmental Policy .................................................................................................................3
Before Starting................................................................................................................................4
System Installation.......................................................................................................................5
Mitsubishi electric adapter motorized (AZEZ6MELAM)............................5
Mitsubishi electric return plenum (AZCEZMEPR) ........................................6
adapter motorized assembly.......................................................................................7
Assembly to indoor unit......................................................................................7
Return plenum assembly...................................................................................8
Innobus Pro6 Main Control Board (AZCE6IBPRO6).........................9
Technical specs .........................................................................................................9
Thermostat installation........................................................................................10
Connection to the indoor unit ........................................................................10
Other peripherals.....................................................................................................10
Power supply to the system .............................................................................11
Reset the system..................................................................................................................11
Change of battery ...............................................................................................................11
Checking the Installation ........................................................................................................12
Initial Configuration ....................................................................................................................13
Airzone Blueface zero.......................................................................................................13
Airzone Think..........................................................................................................................14
Airzone Lite..............................................................................................................................16
Checking the initial configuration ..........................................................................17
System reset............................................................................................................................17
Zone reset.................................................................................................................................17
Airflow Regulation........................................................................................................................18
Airflow adjustment (REG)..............................................................................................18
Minimum air adjustment (A-M).................................................................................18
System Advanced Settings.....................................................................................................19
Airzone Blueface ..................................................................................................................19
Airzone Think..........................................................................................................................19
System parameters............................................................................................................20
Zone parameters..................................................................................................................20
Self-Diagnose...................................................................................................................................21
Main Control Board............................................................................................................21
Comunication Gateway ..................................................................................................22
Blueface And Think Thermostat...............................................................................22
(AZCE6BLUEFACEC / AZCE6THINKR)....................................................................22
Wireless Lite Thermostat (AZCE6LITER)..............................................................22
EN

3
EN
Environmental Policy
• Never dispose of this equipment with household waste. Electrical and electronic
products contain substances that can be harmful to the environment if not
properly handled. The crossed-out waste bin symbol indicates separate collection
of electrical devices, which must be separated from other urban waste. For correct
environmental management, at the end of its useful life the equipment should be
taken to the collection centers provided for this purpose.
• The parts that make it up can be recycled. Therefore, please respect the regulations
in force regarding environmental protection.
• If you replace the equipment, the original equipment must be returned to your
dealer or deposited at a specialized collection center.
• Violations are subject to the penalties and measures stipulated in environmental
protection law.
Access all our technical documents and the self-diagnosis section, check the most FAQs,
certificates and watch our videos at: myzone.airzone.es/products/
Access our declaration of conformity at: http://doc.airzone.es/
producto/Gama_AZ6/Airzone/Certificados/Declaration_of_
conformity_AZ6.pdf
Hereby, Corporación Empresarial Altra, S.L., declares that the AZEZ6MELAMxxxV is in
compliance with the essential requirements and other relevant provisions of directive 2014/53/
EU.

4
• The system must be installed by a qualified technician.
• This product must not be modified or disassembled under any circumstances.
• Do not handle the system with wet or damp hands.
• In the case of any malfunction of this appliance, do not repair it yourself. Contact the
sales distributor or service dealer for repair or disposal of the product.
• Check that the HVAC installation has been installed according to the manufacturer's
requirements, complies with local regulations in force and is working correctly
before you install the Airzone system.
• Place and connect the elements in your installation in accordance with current
regulations covering electrical installations.
• All connections must be made with the power supply completely turned off.
• Take care not to short circuit any of the system's connections.
• Please refer carefully to the wiring diagram and these instructions when wiring.
• Connect all wiring securely. Loose wiring may cause overheating at the connection
points and is a possible fire hazard.
• Do not locate the Airzone communication bus close to power lines, fluorescent
lights, actuators, etc. as this may cause interference in communications.
• The connection to the external power supply must include a main switch or other
method of disconnection that includes a constant separation for all polarities,
in accordance with appropriate local and national regulations. The system will
Before Starting
automatically restart if the power supply is turned off. Use separate circuits for the unit
that is to be controlled and the power supply to the system.
• Check the polarity of each device's connectors. A wrong connection can seriously
damage the product.
• To connect to the system, use Airzone cable: four-wire cable (2x0.22 mm2twisted
shielded wires for data communications and 2x0.5mm2wires for power supply).
• A Blueface thermostat must be used to enable all the Airzone system functionalities.
• Recommendations for the placing of the thermostats:
• For equipment using R32 refrigerant, verify the compliance with the local
refrigerant regulation.
• The room size installation requirements mentioned in the manual of the ducted
indoor unit, to which the Easyzone is connected, remain applicable to each and
every separate room served by the Airzone unit.
• Ducts connected to Easyzone shall not contain a potential ignition source.
EN

5
EN
System Installation
MITSUBISHI ELECTRIC ADAPTER MOTORIZED (AZEZ6MELAM)
Airzone adapter plenum includes:
- Main board.
- Communication gateway
- Circular dampers of 160 or 200 mm in diameter.
- Manual control system of flow.
AZEZ6MELAM01S3V
AZEZ6MELAM01M4V
AZEZ6MELAM01L5V
AZEZ6MELAM01M5V
AZEZ6MELAM01L6V
AZEZ6MELAM01S4V

6
EN
MITSUBISHI ELECTRIC RETURN PLENUM (AZCEZMEPR)
Airzone return motorized plenum that is mechanically adapted to the main ducted AC units of
Mitsubishi Electric.
AZCEZMEPRRI01S
AZCEZMEPRRI01L
AZCEZMEPRRI01M

7
EN
ADAPTER MOTORIZED ASSEMBLY
Use threaded rods to fix the Easyzone to
the ceiling through the tabs found at each
end.
It is recommended to insulate all the metal parts of the adapter that are exposed to outdoor
conditions in order to prevent condensation.
Locate the drilling holes; if they are
covered, use a screwdriver to uncover them
to fix the Easyzone to the unit.
Important: If your unit has a front with
circular adapters, remove this and mount
the supplied adapter.
Place the Easyzone over the unit's supply
vent and fix it using the screws.
Be sure to insulate the connection neck.
Use strips of 25 mm thick insulation
material (glass wool or polyethylene
foam). The width of these insulation strips
is 97 mm for the Standard and Medium
motorized plenum and 37 mm for the Slim
motorized plenum.
Assembly to indoor unit

8
EN
Return plenum assembly
Remember that the motorized elements are numbered in the following
manner:
Connect the duct from each zone to its corresponding damper. Follow the instructions for
proper insulation. Make a cut in the duct to keep the motor outside.
Cut out the insulation seal on top of the
mouth following the contour lines. Start
with a small cut in the slots.
Insert the mouths into the slots provided.
Bend the excess sheet metal to fix the
mouths.
Screw the plenum casing to the return
mouth of the A/C unit (screws not
included).
Remove the cut insulation and pre-cut
area from the sheet metal.