Albiral ARTHUR HOLM DB2 Series User manual

User Guide
Danish craftmanship
Mediterranean soul
Technology Serving Design
DB2
HDCP compliant retractable monitors for furniture integration

TABLE OF CONTENTS
REGULATIONS AND SECURITY 5
SAFETY INSTRUCTIONS 5
SYSTEM DESCRIPTION 7
INSTALLATION INSTRUCTIONS 11
CONTROLS 24
OSD MENU 27
ISD MENU 30
INPUT CONNECTORS 36
AHnet PROTOCOL 37
VIDEO SIGNALS 41
AHLink 42
INFORMATION ON DISPOSAL 45
WARRANTY TERMS AND CONDITIONS 46

WELCOME
Thank you very much for purchasing an Arthur Holm product.
Please, read these installation and operating instructions carefully and
keep them in a safe place for future consultations.
We remain at your entire disposal if you have any suggestions.
Henrik Holm
General Manager
[email protected]

ABOUT US
The Company
Arthur Holm has its origins in the Danish furniture designer Jorgen Alex
Jensen, who was active during the sixties and the seventies. His design
inspiration and his concept of ergonomics have been continued by his
family, who is the design force behind Arthur Holm product range. The
result of combining Scandinavian design tradition with Mediterranean
creativity, exibility and emotion is a wide product range built on more
than 25 years of craftsmanship.
Arthur Holm offers a professional product range where tomorrow’s
technology is shaped into valued materials with design exibility and
customisation, specially created to enhance communication in reception,
collaboration, conference and meeting areas.
The art of customisation
Arthur Holm offers a range of ingenious products whose designs are based
on quality materials and the latest technology. Products which endow
meeting and conference rooms with silent, ergonomic, innovative and
aesthetic solutions that integrate into the furniture, hang from the walls as
works of art or are used as interactive points of information.
The world of Arthur Holm
Arthur Holm offers a selection of unique, elegant, versatile, exible and
ergonomic products that are being used in meeting and conference
rooms, reception areas, huddle rooms, control rooms, auditoriums and
public zones of leading companies throughout the world.
The numbers speak for themselves! We currently own 33 product patents,
have presence in over 45 countries with products and solutions inmore
than 25,000 installations.
It will be our pleasure to work with you, designing your unique and
personalised environment. Our broadcast electronic engineers will
provide the latest technology while our design team will offer you the most
exclusive appearance.
Our team puts its heart, passion and pride in all our designs.

5
SAFETY INSTRUCTIONS
Plugs
• Do not dismantle any part of the monitor power connector.
• Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indenite period of time.
Power and extensions cords
• Use the appropriate power cord with the correct plug type.
• Do not overload wall outlets or power cords.
• Make sure the total ampere passed through an extension cord does not
exceed the maximum allowed by the cable used.
• Do not place anything on the power cord.
• Do not locate this product where a person may walk or trip over the
cord.
EC REGULATIONS AND SECURITY
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated
voltages inside some of the components, of sufcient magnitude
to expose people to risk of electronic shock.
This symbol draws attention to important use and maintenance
instructions in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
This symbol indicates D.C. current.

6
Wiring connected to hazardous voltage requires installation by
qualied personnel or the use of ready-made exible cables.
For your security, your equipment must be connected to an
electrical outlet with grounding connection protection.
Since the plug is used to disconnect the device, the operating
electrical outlet must be in an easily accessible place.
Environment
• Install the equipment on an elevated, at surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙Rain or water
∙Excessive heat, cold or humidity
∙Area exposed to direct sunlight
∙Dirty areas
∙Equipment generating strong magnetic elds
• Avoid placing open containers of liquid, near the equipment.
• Keep a minimum distance of 30 mm in order to have good ventilation.
• Never place above the device any sources of ames such as lighted
candles, etc.
• If you are using the device in extreme weather conditions and/or
tropical climates, the equipment should be installed in a room which
ensures a reasonable level of temperature and humidity.
• To prevent damage the equipment must be rmly anchored to the
surface, as shown on the installation instructions.
SAFETY INSTRUCTIONS

7
SYSTEM DESCRIPTION
General
Arthur Holm’s DB2 is a motorised retractable monitor range that creates
minimum impact on the furniture’s design. It is easy to integrate,
intuitive to use (one simple operation sensor located on the top of the
monitor) and almost invisible (no cover plate, neatly streamlined into
the furniture) when not in operation.
DB2 provides a harmonious silent drive with variable speeds. With a
maximum thickness of 20 mm, this monitor range is elegant, beautiful
from all angles and can be veneered for a seamless integration in the
furniture, creating a long lasting user’s experience and delivering an
exceptional image’s quality.
The monitors are equipped with AH-AMMC: an auto mechanical
calibration movement system and the use of the Arthur Holm’s ERT will
enable the address conguration of all the monitors installed in a table
by simply pressing a button. The AHlink app allows a wireless access to
the test and adjustment functions without removing the unit from the
table.
Highlights
• The smallest impact on the table surface
• One operation sensor on top of the aluminium housing
• Front double sided anti-reective 2 sides coating 2 mm glass
• Energy saving, low consumption video controller
• AH-AMMC Auto mechanical movement calibration
• Wireless connectivity for setup and control
• No cover plate required
• 20 mm max thickness

8
SYSTEM DESCRIPTION
Available Models
MODEL DESCRIPTION
AH10DB2
HDCP compliant vertically retractable aluminium 10,1"
Full HD monitor with 20 degrees of adjustable inclination.
Solid aluminium monitor housing with 17 mm. of thickness
featuring 2 mm. double sided anti reective black
edged glass. Allows its installation in a furniture opening
of a maximum width of 21 mm and the monitor housing
is ush with the desk once in recessed position. One
capacitive sensor is located on top of the aluminum
frame. DVI-I and DVI-D inputs, RS-422 I/O, ISD (Interactive
Setup Display), USB port for rmware upgrades, AH-
AMMC (Auto-mechanical movement callibration).
AH17DB2
HDCP compliant vertically retractable aluminium 17,3"
Full HD monitor with 20 degrees of adjustable
inclination. Solid aluminium monitor housing with 20 mm.
of thickness featuring 2 mm. double sided
anti reective black edged glass. Allows its installation
in a furniture opening of a maximum width of 24 mm
and the monitor housing is ush with the desk once in
recessed position. One capacitive sensor is located on
top of the aluminum frame and a second touch sensor
on the screen’s glass. DVI-I and DVI-D inputs, RS-422 I/O,
ISD (Interactive Setup Display), USB port for rmware
upgrades, AH-AMMC (Automechanical movement
callibration).
AH22DB2
HDCP compliant vertically retractable aluminium 21,5"
Full HD monitor with 20 degrees of adjustable
inclination. Solid aluminium monitor housing with 20 mm
of thickness featuring 2 mm. double sided
anti reective black edged glass. Allows its installation in
a furniture opening of a maximum width of 24
mm. and the monitor housing is ush with the desk once
in recessed position. One capacitive sensor is
located on top of the aluminum frame and a second
touch sensor on the screen’s glass. DVI-I and DVI-D
inputs, RS-422 I/O, ISD (Interactive Setup Display), USB port
for rmware upgrades, AH-AMMC (Automechanical
movement callibration).

9
SYSTEM DESCRIPTION
Options
AH10DB2 AH17DB2 AH22DB2
TS10DB2
Projected capacitive
multitouch screen
TS17DB2
Projected capacitive
multitouch screen
TS22DB2
Projected capacitive
multitouch screen
CABDB2 (Min.10 units)
Black anodised
CABDB2 (Min.10 units)
Black anodised
CABDB2 (Min.10 units)
Black anodised
GFDB2 (Min.10 units)
Gold nish
GFDB2 (Min.10 units)
Gold nish
GFDB2 (Min.10 units)
Gold nish
BFDB2 (Min.10 units)
Bronze nish
BFDB2 (Min.10 units)
Bronze nish
BFDB2 (Min.10 units)
Bronze nish
CPDB2 (Min.10 units)
Painted
CPDB2 (Min.10 units)
Painted
CPDB2 (Min.10 units)
Painted
ACP (Min.10 units)
Aluminium cover plate
ACP (Min.10 units)
Aluminium cover plate
ACP (Min.10 units)
Aluminium cover plate
AHDL
DynamicLoop
AHDL
DynamicLoop
AHDL
DynamicLoop

10
Box Contents
Before the installation of your retractable monitor, please check the
contents of the shipping box, it must contain the following items:
• Monitor
• Power cord
• Remote control (1 per 5 monitors)
• Power supply 100-2 40Vac, 50-60Hz. Output 12V
• User guide
Important note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one.
Connections
Before connecting the power:
1. Install the unit on a table or desk, in vertical position.
2. Remove the foam protecting piece before connecting the monitor.
Power connection:
1. Plug the power cable from the power supply into an AC socket of
100-240 Vac, 50-60Hz.
2. Plug the 12V D.C. cable into the socket on the unit.
Caution! Never place this monitor in horizontal position.
SYSTEM DESCRIPTION