Ameriwood HOME 1753296PCOM User manual

B341753296PCOM01
Do Not Return This Product!
Contact our customer service team for help first
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
–Unit can !p over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
TV Stand
1753296PCOM
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Easy Tough
Assembly Difficulty Meter
Follow Ameriwood Home

Contact Us!
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team first for help
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR
Visit ameriwoodhome.com
Assembly Tips
2
ameriwoodhome.com
- Open your item in the area you plan to keep it for less heavy li!ing
- Iden"fy, sort and count the parts before a#emp"ng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le!) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture

Before You Start
Cam Lock Fastening System
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cau!on: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is !ght.
Failure to do so may result in stripping the screw.
Quick
Tip
Assembly
1
3
2
4

Board Iden•fica•on
Not actual size
4
ameriwoodhome.com
x1
T1753296010UD
TOP PANEL
x1
T1753296020UD
FIXED SHELF
x1
T1753296030UD
BOTTOM PANEL
x1
T1753296040UD
LEFT SIDE PANEL
x1
T1753296050UD
RIGHT SIDE PANEL
1
5
2 3
4
x1
T1753296060UD
LOWER PARTITION
6
x1
T1753296070UD
UPPER PARTITION
7
x1
T1753296080UD
MIDDLE RAIL
8
x2
T1753296090UD
SIDE RAIL
9

Board Iden•fica•on
Not actual size
5
ameriwoodhome.com
x1
T1753296100UD
UPPER BACK PANEL
x1
T1753296110UD
LOWER BACK PANEL
x2
T1753296120UD
DOOR
x2
T1753296130UD
LONG LOWER RAIL
x2
T1753296140UD
SHORT LOWER RAIL
10
14
11 12
13
x4
T1753296150UD
FOOT
15
x1
T1753296160UD
MIDDLE FOOT
16
x2
T1753296170UD
TOP APRON
17

Part List
Actual Size
6
ameriwoodhome.com
x6
TUD0036
DOWEL 6 X 50
x26
TUD0001
Cam Bolt
x17
TUD0009
CBS 4 x 38
x26
TUD0002
Cam Lock
15-12
x32
TUD0030
DOWEL 6 X 30
x32
TUD0008
CBS 3.5 x 16
x4
TUD0010
PH M4 X 18
x4
TUD0020
L-BRACKET
Hardware Bag Reference Number:
21753296PCOM0
x8
TUD0004
DOWEL M8 X 25

Part List
Not Actual Size
7
ameriwoodhome.com
x1
TUD0038
WARNING LABEL
x2
TUD0012
HANDLE
x4
TUD0037
HINGE Ø35
Hardware Bag Reference Number:
21753296PCOM0

8
ameriwoodhome.com
* raw edges are shaded
Step 1
x6
TUD0001
x14
TUD0030
DOWEL 6 X 30
x2
TUD0036
DOWEL 6 X 50
x2
TUD0009
CBS 4 x 38
4
5
2
7
NOTE : DOWEL 6 X 50

9
ameriwoodhome.com
Proper orientation of CAM LOCK
Tip
Assembly
Quick
* raw edges are shaded
Step 2
x2
TUD0030
DOWEL 6 X 30
x6
TUD0002
Cam Lock
15-12
4
5
2
6

10
ameriwoodhome.com
Proper orientation of CAM LOCK
Tip
Assembly
Quick
* raw edges are shaded
Step 3
x12
TUD0030
DOWEL 6 X 30
x6
TUD0002
Cam Lock
15-12
x4
TUD0036
DOWEL 6 X 50
9x2
8
9
8
9
2
4
5
6
11
x6
TUD0001
NOTE : DOWEL 6 X 50

11
ameriwoodhome.com
* raw edges are shaded
Step 4
x8
TUD0001
14 x2
15 x4
13 x2
x8
TUD0004
DOWEL M8 X 25

12
ameriwoodhome.com
* raw edges are shaded
Step 5
x8
TUD0002
Cam Lock
15-12
15
15
15
15
13
13
14
14
15
15
15
16
3
x5
TUD0009
CBS 4 x 38

13
ameriwoodhome.com
* raw edges are shaded
Step 6
x8
TUD0008
CBS 3.5 x 16
x4
TUD0020
L-BRACKET
x6
TUD0009
CBS 4 x 38
3
2
5
3

14
ameriwoodhome.com
* raw edges are shaded
Step 7
x4
TUD0030
DOWEL 6 X 30
10
5

15
ameriwoodhome.com
Proper orientation of CAM LOCK
Tip
Assembly
Quick
* raw edges are shaded
Step 8
x6
TUD0002
Cam Lock
15-12
x6
TUD0001
5
1
1
x4
TUD0009
CBS 4 x 38
17
17

16
ameriwoodhome.com
* raw edges are shaded
Step 9
x2
TUD0012
HANDLE
x4
TUD0037
HINGE Ø35
x24
TUD0008
CBS 3.5 x 16
x4
TUD0010
PH M4 X 18
1
5
12
12
12

17
ameriwoodhome.com
* raw edges are shaded
Step 10

18
ameriwoodhome.com
Maximum Loads
This unit has been designed to support the maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse, and/or serious injury.
1. This cer!"cate applies to Dorel Home Furnishings, Inc. product iden!"ed by this instruc!on manual.
2. This cer!"cate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint ( 16 CFR 1303).
3. This product is distributed by:
4. Site of Manufacturer: Muar, Malaysia.
5. See front page of instruc!on manual for date of manufacturer.
Dorel Home Furnishings, Inc.
410 East First Street South,
Wright City, MO 63390
636-745-3351
Cer!"cate of Con"rmity
Warning: Please make sure that all the objects are removed before moving the assembled unit.
The unit must be li!ed by more than one person, not dragged or pushed. Failure to do so will
cause product damage, instability, product collapse, and/or serious injury.
x1
TUD0038
WARNING LABEL

19
ameriwoodhome.com
Register your product to receive the following:
* New trend details -sneak peek on what's new
* Surveys -have a voice within our community
* Exclusive deals and discount codes
* Quick and easy replacement part service
To register your product, visit
Visit your local retailer's website, rate your purchased
product and leave us some feedback!
We would like to extend a big "Thank You" to all of
our customers for taking the to assemble this
Seeds product, and to give us your valuable
feedback.
To register your product, visit Ameriwoodhome.com
We would like to extend a big “Thank You” to all
of our customers for taking the time to assemble
this Ameriwood Home product, and to give us your
valuable feedback

20
ameriwoodhome.com
* raw edges are shaded
Español
Cubierta Delantera
Este libro de instrucciones con!ene información IMPORTANTE de seguridad. Por favor lea y manténgalo para
referencia en el futuro.
No Regrese este producto" Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener
ayuda.
Llamenos al: 1-800-489-3351 (Gra!s) Lunes - Viernes 9am - 5pm CST
Visitar: www.ameriwoodhome.com
PRECAUCION
Este mueble puede volcarse y causar graves heridas y/o muerte.
Anclar el mueble a un poste de madera en la pared (si esto se requiere).
No Permita que los niños monten el mueble.
Mantenga los ar#culos más pesados en los cajones de abajo.
Consejos Ú" les (página 2)
- Abra su ar#culo en el área donde usted planea u!lizarlo para evitar levantar y moverlo menos
- Iden!$car, ordenar y contar las piezas antes de intentar ensamblar
- Las clavijas de compresión se golpean con un mar!llo
- Las diaposi!vas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta
- Asegúrese de que siempre este el punto locaizado en la parte superior de bloqueador de leva
este volteadohacia borde exterior
- U!lizar todos los clavos para el panel de atras y distribuirlos por igual
- El panel de atras debe u!lizarse para asegurarse de que la unidad quede $ja y $rme
- No use quimicas fuertes ni limpiadores abrasivos en este ar!culo
- Nunca empuje, !re ni arrastre los muebles
Antes de Que Empieces (página 3)
-Lea cuidadosamente cada paso y siga el orden correcto
-Separar y contar todas sus piezas y hardware
-Dése su$ciente espacio para el proceso de ensamble
-Tenga las siguientes herramientas: destornillador de cabeza plana, %2 cabeza Phillips
Destornillador y mar!llo
-Precaución: Si usa un taladro electrónico o un destornillador eléctrico para atornillar, por favor asegúrese
que deje de atornillar cuando el tonillos este apretado. Fallar hacer esto puede causar barrer el tornillo
Sistema de fi jar el bloqueo de leva (página 3)
Esta sistema de $jar el bloqueo de leva sera usado en todo el proceso ensamble
Iden" fi cación de la Junta (página 4&5)
Tamaño no real
Lista de (página 6)
Tamaño real
Lista de (página 7)
Tamaño no real