Apeman M4 User manual

M4
Projector
User Manual

Menu
1English
15
Deutsch
29
Français
43Italiano
57Español
71
日本語

Contents
Warning
Introduction
Product Features
Package Contents
Projector Part Locations
Operation Guide
Power On/Off
Connections
Adjusting the Projection Image
Adjusting Focus
Adjusting Volume
Specifications
Q&A
Warranty
2
3
7
12
13
14
1

Warning
To avoid the risk of electric shock or damaging the internal
components, please do not disassemble M4 Projector by yourself.
Please use the equipped AC adapter and follow the instructions
mentioned in this manual to operate M4 Projector.
Please do not block the airflow outlet on the side of M4 Projector.
Never drop or insert an object into any opening.
Close supervision is necessary when M4 Projector is used by or
near children or the mentally disabled individuals.
Please do not place or use M4 Projector in direct sunlight, near
heaters or damp rooms. Charge M4 Projector periodically if not
use for a long time.
Please unplug M4 Projector during lightning storms or without
using it for long periods of time.
·
·
·
·
·
·
2

Introduction
Multi-Screen Function
M4 Projector supports multi-screen sharing display with many
devices including PC, laptop, iPad, iPhone and other
smartphones(support MHL), allowing you to enjoy videos, games
and images with your family.
Power Bank Function
M4 Projector is equipped with built-in 3400mAh rechargeable
lithium battery, which can be used as a power bank. Connect your
device to M4 Projector with a USB cable.
This section introduces your new M4 Projector and describes the
features and capabilities.
Product Features
3

⑤
②①
⑥
M4
Projector
User Manual
④
③
Package Contents
④ USB Charging Cable ⑤ AC Adapter ⑥ User Manual
③ Tripod② HDMI Cable① APEMAN M4 Projector
4

6
7
8
910
11
12 3 45
Projector Part Locations
5
1. 3.5mm earphone jack
2. Standard USB 5V /
1A power output
3. HDMI signal input port
4. Reset button
5. Micro USB 5V /
2.4A power input
6. Optical Lens
7. Volume up
8. Volume down
9. Power switch
10. Backlit Battery Indicator
11. Focusing wheel

LED lights indicate the battery status. Only one LED
light is on and flashes means low power. Use the
provided AC Adapter to charge your Projector.
Otherwise the Projector will automatically shut down
when the power is too low.
M4 Projector shall be charged with the equipped
charger. When the LED Indicator light on in White and
flashes, the Projector is currently charging. Each LED
light stands for 25% power, when all the 4 LED lights
are on, the Projector is fully charged.
Fully charging the battery of M4 Projector needs 3-5
hours before first use. It will last about 2 hours once it’s
fully charged.
Note: 1.
2.
3.
6