Astivita WMTL7KGWH User manual

Full Automatic Electric Washing Machine
OWNER’S MANUAL
Before using your washing machine, please read
this manual carefully and keep it for future reference.
Read This Manual
Inside you will find many helpful hints on how to use
and maintain your washing machine properly.
Just a little preventative care on your part can save
you a great deal of time and money over the life of
your washing machine. You'll find many answers to
common problems in the chart of malfunction display
and solutions. If you review the chart of malfunction
display and solutions first, you may not need to call
for service.
WMTL7KGWH

Notes
1
2
5
7
8
11
12
13
15
17
18
Contents
Safety and precautions........................................................................
Installation of the washer......................................................................
Preparation before washing..................................................................
Parts identification of the washer...........................................................
Instruction of the washer operation panel...............................................
Quick start..........................................................................................
The main wash....................................................................................
Special features..................................................................................
About the procedure of full automatic wash program..................................
Cleaning and Maintenance of the washing machine..............................................
Identify usual trouble of washer..............................................................................
Malfunction display and solutions..........................................................
Technical specifications................................................................................
9
19
19
2
Safety and precautions
Please do not directly rinse the
machine with water when
cleaning.
Please do not install the machine in
damp and raining environment to avoid
electric shocking, catching fire, faults
and distortion
accidents.
No dampness No rinsing
小天鹅
小天鹅
Observe the following items in order to prevent from injuring yourself, others
and the damage of property:
Please observe following contents of graphics.
！
Warning
Caution
This indicates serious injury or death to human
being may be caused.
This will remind you that injury to people and
damage to property may occur.
This graphics represents (operation prohibited), and detailed
prohibitive items will be displayed inside the graphics.
This graphics represents(cause attention),and detailed
cautions will be displayed inside the graphics.
This graphic represents (forcible execution), and detailed
forcible execution items will be displayed inside the graphics.
Warning
No dismantling No touching
Please do not disassembly
and assembly the
machine without
authorization.
Please do not insert your hand
and take out clothes inside the
spin barrel before
it is fully stopped.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack knowledge, unless they have been
of experience and
given supervision or instruction concerning
use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
！！！
！

Please do not let children climb the
machine or peer into the rotating
spin barrel to avoid accidents.
It is prohibited to wash the clothes
touching with kerosene, gasoline,
alcohol and other flammable materials.
Please do not damage power flexible
cord and power plug to avoid electric
shocking, short circuit and catching
fire.
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
Please pull out plug from the socket
if the machine is not in use.
Please well connect the earth line of
socket to avoid electric shocking by
accidental leakage.
（earthing）
Please insert the power plug tightly.
！
!
!
小天鹅
Prohibited
Prohibited
Prohibited
Smoke and fire prohibited
Earthing
Pull out the plug
Warning
Please do not place on the washer
burning candle, mosquito-repellent
incense, cigarette and other
flammable things, as well
as electric stove, air
heating fan and other
heating
sources.
3
Please use correct power source. Please do not pull out or insert the
plug with wet hands to avoid electric
shocking.
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
Customers are not allowed to change
the power line without permission.
It is strictly prohibited to place
children or lay
weights on the
washer.
Please do not pull the electric cord
when pulling out the
plug.
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
！
!
!
!
Wet hands are
prohibited
+
+
小天鹅
>50 C
小天鹅
The water temperature shall not exceed
50℃ when washing
with warm water.
Prohibited
Prohibited Prohibited
Prohibited
Caution
4

+
+
55
Remove package
Installation of drain hose
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is
strictly forbidden.
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
Base foamed cushion
FOR LOWER DRAIN SYSTEM ONLY
Placement of water drain hose
Under3m
Under 15cm
If the water drain hose shall
be extended, its length shall
not exceed 3 meters,
otherwise it will affect the
water discharging time.
The placed height of water
drain hose shall not exceed
15cm.
Do not bend the water
drain hose and place
it under the washer.
The height of drain hose (“a”)should between 86-100 cm.
Diameter of “b”shuld not less than 3 cm, and flow capacity
not less than 40 L/Min.
FOR UPPER DRAIN SYSTEM ONLY
86~100 cm
Placement of upper water drain hose
Installation of water inlet pipe
Before washing machine starts, user should hang up
the drain pipe 86-100cm height from the floor.
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Water inlet hose
Clamping nut
Only for model with double
screw thread water inlet pipe
Installation of the washer
666
Installation of the washer
6
Clamping nut Water inlet hose
+
Small ball
Junk ring
Connect: Push down the slide jacket
of speedy connector (4 small balls
must be exposed ),insert it into the
connection socket and then push
upward Release the connection
of water tap with speedy connector
completely. If it is required to feed
water, simply open the water tap.
Separate: Close the water tap, push
down the slide jacket of speedy
connector and pull out the speedy connector.
Unscrew four screws of part A
and sleeve part A horizontally
over the mouth at the end of
water tap (the mouth at the end
of water tap must be flat and
smooth. Flatten it by filing if it is
not flat) and push it upward with force making the rubber
washer firmly press the plane center of water tap mouth.
Then tighten the screw sequentially. After that, tightly
screw on part B.
Connect
Separate
The connection socket
consists of A and B two
parts. Before installation,
A and B two parts must
be unscrewed about
5mm, or directly
disconnected. If the
bore of water tap is
larger, remove the
plastic junk ring of
part A.
Push down the slide jacket
to expose the small balls and
enable separation of connector
socket from speedy connector.
5mm
A
B
1
6
5
4
3
2
Installation of water inlet pipe
Tightly screw another end of water inlet
hose on water inlet valve . (with rubber
seal ring inside).
Note: When tightening the clamping nut,
evenly apply the force and do not twist
the water inlet valve to avoid breaking of
water inlet valve joint.
Only for model with single screw thread water inlet pipe
！
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
The openings must not be obstructed by a
carpet.This appliance is for indoor use only.
The new hose-sets supplied with
the appliance are to be used and that old hose-sets should
not be reused.
+
+
+
+
+
+
+
+
+
+
+
+
7

Preparation before washing
7
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
and barrel from damage.
！
NOTICE
Adjust the adjustable foot to make
the washer be placed stable.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect with to
power source.
3
4
+
+
Put down the drain
hose.
5
Gravity drain
Upper drain
Note:
The water
will overflow
when the
height of
the drain
hose under
860mm.
>860mm
Put in
clothes
and
suitable
amount of
washing
powder.
6
Install the water
inlet hose.
2
+
+
For one inlet hose
For two inlet hoses
+
+
+
+
8
Parts identification of the washer
tightly to prevent them
Turn on the
water supply. Accessories
Base cover
Universal connector
Water inlet hose assembly
Self-tapping screw
Please refer to the real material as the attachment
Power line
Cabinet
Control panel
Top lid
Upper drain hose
Adjustable foot knob
Handle
Water inlet valve
Filter support
Impeller
Owner’s manual
Full Automatic Electric Washing Machine
OWNER’S MANUAL
Before using your washing machine, please read
this manual carefully and keep it for future reference.
Read This Manual
Inside you will find many helpful hints on how to use
and maintain your washing machine properly.
Just a little preventative care on your part can save
you a great deal of time and money over the life of
your washing machine. You'll find many answers to
common problems in the chart of malfunction display
and solutions. If you review the chart of malfunction
display and solutions first, you may not need to call
for service.

910
Instruction of the washer operation panel
Three washing water levels description 3.Water Level Selection
2.Start / Pause
1.Power Supply
4.Function
5.Child Lock
6.Delay 7.Program Selection
1
3
5
7
2
4
6
8
Blanket
Quick
Delicates
Soak
Child Lock
Wash
Rinse
Spin
Temperature Sensing
Water cycle
Long press “Delay”button,every 0.5s will increase 1 hour , and also have
a beep once, when after reach to 24 hours, it will return to the initial state.
After "delay"starts(do not press "child lock"button),consumer can review
the set programs when press "delay" button again. When "delay"starts, there
will be an"delay alarm"if consumer open the lid, and if consumer close the lid,
this alarm will be released. But while the machine is running, if consumer
open the lid , there will be no alarm. Detailed usage, consumer can refer to
the description of "special function-delay function".
Before starting, continuously press this
button to select the corresponding program:
[Jeans], [Quick], [Blanket], [Delicates]
Normally on; [Soaking],[Standard], [Baby
Clothes], [Drum Clean] Flash.
Press [Start/Pause]button to start the
program, then press [Program] &
[Rinse] button at same time to start
the child lock function, it can lock the
selected program to avoid any
unnecessary troubles while children
made the faulty operation. If
consumer wants to close this function,
they can re-press [Rinse]&[Program]
button at the same time.
[ON/OFF] button has function of
open or close the power supply.
[Start / Pause] button has both
function of start and pause.
Continuously press this button, the
machine will be switched between
start and pause mode.
"Three washing water levels"laundry concept:(suitable for the program which have soak
function),the water level of "soak"/"washing"/"rinsing" will be raised in turn automatically,
when soaking, it will be low water level, when washing, it will be mid water level, when rinsing,
it will be high water level. If consumer select "soaking"program:the water levels selection
will be 4,when running soaking, the water level only reach to the 4th level, the water level
display will show 4 levels. when the program come into washing period, the water inlet will
reach to the 5th level, the water level display will show 5 levels, and then run the washing
process. when the program come into the rinsing period, the water inlet will reach to the 6th
level, the water level display will show 6 levels.
Before washing,consumer can select the water level
according to the dirty degree,material or weight of
clothes.The detailed usage,consumer can refer to
"The relationship between the water level and load.
Soaking
Baby Clothes
Drum Clean
8.Rinse description
This button can be responsed only under
the normal program , and need to have the
rinsing process . Comsumer can select the
rinsing times and water cycle function.
8 9
9.Temperature
Press the button to select different
temperature water for wash.
Jeans
Standard
After start , one light will flash among
the function of soak , wash , rinse and
spin according to real process.

Detailed Steps:
Main Functions:
1 Install the washing
machine
3 Measure out the
detergent 7 Plug the power supply
8 Select the desired
program
5 Put down (hang up)
the drain pipe
4 Close the top lid
9 Press the
[start/pause] key
11
1.Press [ON/OFF] button;
2.Select the water level according to the washing load;
3.Press [Start/Pause] button.
2 Load the laundry
Quick start
6 Turn on water supply
Preparation:
1.Put down the drain pipe;
2.Connect the inlet pipe,turn on the tap;
3.Put the plug of the power strip into the socket;
4.Take out the coins and other things from the pocket,shake off the sediment of the clothes.
12
The main wash
For the stubborn clothes which have soil or heavy smudgy,consumer can select the
program of "rinsing","spinning" to pre-wash,after that put the detergent,and then select
the full washing programs.
Notice:
1. Do not wash the load with the hot water higher than 50℃,to avoid the deformation of
plastic parts;
2. If the water level do not reach to the set level,the washing machine will inlet water itself.
! .Close the top lid when machine is running , otherwise, it will
automatically stop working and send out abnormal warning.
during spin process
! .The washer will not work when the filled water does not reach the set water level.
NOTICE
！
Alarm function when door opened:
1. When washing or spinning,there will be E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue to run the previous
program which before consumer open the lid.
2. When "Delay" starts,there will be "Delay" E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue the "Delay"function.
But while the machine is running,if consumer open the lid,there will be no alarm.
When washing process finished:
1. The buzzer will buzz continuously for 6 times and then the power will be automatically cut
off;
2. Turn off the water tap.
3. Although the power can be cut off automatically, the power plug must be pull out as well
for the safety.
Pre-Wash for dirty clothes:
Program Selection:
1. Press [ON/OFF] button;
2. Select the water level and program;
3. Press [Start/Pause] button.
Clothes Washing Skills:
1. While washing the clothes which are easily damaged,consumer can put those clothes
into the mesh bag,and then take the washing process;
2. For the big size or easily floated clothes,should be put into the tub first;
3. For the easily pilling clothes,consumer should turn inside out the reverse side clothes,
and then take the washing process;
4. While washing the clothes which have strap or zipper,consumer should tie the strap and
zip the zipper well.
5. Remove the sediment before washing;
6. For the especially dirty parts,consumer can scrub with detergent first.

13 14
Special features
Operation Method:
1. Press [ON/OFF] button;
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle
the detergent on the clothes directly, to avoid the clothes
color fading),close the lid;
4. A: While selecting "Soaking","Jeans","Baby Clothes"
program, press [Delay]button, select the delay time,
and then press [Start/Pause] button to start the
"delay"program.After "delay" started, the washing
machine will take the fuzzy weighting, and then start the
"delay"timing.After the fuzzy weighting finished, the washing
machine can select the water level within one min, after that, it will come into the formal
"delay"status,the buttons can not be operated except [Delay] button,[ON/OFF] button and
[child lock] button. B:While selecting"Standard" "Quick","Blanket", "Delicates", "Drum
Clean",press [Delay] button, select the delay time, and then press [Start/Pause] button
to start the"delay"program.The buttons can not be operated except [Delay] button,
[ON/OFF] button and [child lock]button.
Notice: Long press [Delay] button, every 0.5s will increase 1 hour, and also have a beep
once, when after reach to 24 hours, it will return to the initial state.
When "delay" starts, there will be an"delay alarm"if consumer open the lid, and if consumer
close the lid, this alarm will be released. But while the machine is running, if consumer
open the lid, there will be no alarm. After "delay" starts(do not press "child lock"button),
consumer can review the set programs when press [Delay] button again.
Delay:
Press the “DELAY” button each time, the
number on the digital indication adds by
“1”;After the number reaches “24”,press
the “DELAY”button each time,the number
adds by“6”;After the number reaches 48,
the light of delay time is turned off, and
the delay program return to original status.
Special features
Child Lock:
1. This function is effective only after program starts;
2. Press [Start/Pause]button to start the program, then press [Rinse] & [Program] button at
same time to start the child lock function. If consumer wants to close this function, they
can re-press [Rinse]&[Program]button at the same time.
3. When "child lock"started,if open the lid during the running process,there will be an alarm.
Open the lid within 20s,there will be a "E3"alarm,if close the lid within 20s,the alarm will be
released,and continue to run the previous program which before opening the lid.If the lid
opened after 20s,the display will show"CL" alarm named "normal failure alarm",the drain
valve will be opened.after the water drained lasting for 90s,the drain valve will be closed.
During this process,the alarm still can not be released.The normal alarm will be happened
every 15 mins,consumer can power off the machine or unplug to release this alarm.
Program Pause and restart:
1. When program paused,all load closed,the controller will stop running;
2. When restart the program,the washing machine will run the program before pausing.
Fuzzy weighting function:
1. Press "ON/OFF" button;
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle the detergent on the clothes directly,
to avoid the clothes' color fading),close the lid;
4. Select "Soaking","Jeans","Baby Clothes" program. The washing machine will
select the water level automatically according to the load weight.
5. Press [Start/Pause] button to run fuzzy weighting function.
Notice:
1. When there's water in the tub,this function is not available;
2. This function can be only applied under the programs of "Soaking","Jeans","Baby Clothes";
3. Before press [Start/Pause] button,if consumer selected the water level,there will be no
fuzzy weighting function;
4. After press [Start/Pause] button,the washing machine will run the fuzzy weighting function.
Consumer can also select the water level to set the water level as needed.
Self Power off function:
1. After the program finished,the washing machine will power off automatically;
2. If consumer selected the program but not press the [Start/Pause] button,the washing
machine will power off automatically after 10 mins;
3. When alarm happened and was not released,the washing machine will power off after 1 hour;
4. When consumer pressed the [Start/Pause] button during the running process,and forgot
to re-press it to continue the program,the washing machine will power off after 1 hour.
Unbalance Control:
1. During the spin process,and under the condition of safety switch connected,if the sudden
break happened,the washing machine will come into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process,the rinsing LED flashed,inlet the
water to reach to the set level,adjust the clothes' status,drain after finished rinsing,and
return to the normal spinning process.If it is not effective after 3 times' adjustment,there
will be an alarm.
Water cycle:
After rinsing, keep the last rinsing water,and do not drain.Water cycle function can be selected
only under the Jeans program , and need to have the rinsing process (While consumer select the
water cycle function,there will be no drainning and spinning after the last rinsing,the water will be kept in the drum.)
Power failure memory function
If the power supply becomes off suddenly during operation , the machine remembers
the current operation state . When power is on ,the machine returns to former operation
state automatically.

15 16
About the procedure of full automatic wash program
Standard:
Standard fabric washing program,suitable to wash ramie cotton fabric.Wash for once,rinsing
for twice,the spin time is a little long.
Quick:
Suitable to wash light stained clothes and clothes in summer.
Blanket:
Suitable to wash big size load such as curtain/bed sheet etc.,There's 15mins additional
movement soaking time during the washing process.(Movement soak can make the effect
of soaking much better.)
Delicates:
Mid/High/Low water level selection,the tempo is soft,slow washing and spinning speed,to
make the lightest wear and deformation.
Soaking:
Suitable to wash more dirtier clothes,there's 30 mins additional soaking time during the
washing process.
Jeans:
Suitable to wash heavy stained/wearable clothes.
Baby Clothes:
Increase the rinsing times,to reduce the detergent residue on the clothes.Suitable to wash
children's clothes.
By the intermittent spinning,clean the dirt of inner & outer tub and impeller.
Drum Clean:
About the procedure of full automatic wash program
Note: The time required will also vary with water pressures of intake pipe, different clothes
textures and different water drain conditions.
Program Wash time Rinse times Spin time Total time
Jeans
Baby Clothes
Blanket
Soaking
Quick
2 times 50 minutes
59 minutes
80 minutes
77 minutes
10 minutes
3 times
2 times
Delicates
1 times
3 times
40 minutes2 minutes
Drum Clean
2 times
1 times
14 minutes
88 minutes
3 minutes
28 minutes
6 minutes
6 minutes
6 minutes
1 minutes
6 minutes
15 minutes
3 minutes
9 minutes
12 minutes
Soak 30 minutes
Wash 15 minutes
Soak 15 minutes
Wash 15 minutes
6 minutes
1 times
Water level
2
7
4
8
water level
for fuzzy
water level
for fuzzy
water level
for fuzzy
Standard
Soak 30 minutes
Wash 17 minutes
8
WMTL7KGWH
During Standard washing program ,it is identified as Efficiency Program.

17 18
Identify usual trouble of washer
No
washing
Abnormal
draining
Abnormal
spin
List of faults and inspection
Faults Inspection Items
No water
flows in
If the power is off or the fuse is burned out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the filtering screen of inlet valve is blocked by dirt.
If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
If the "Start / Pause" button is pressed after the power
switch is pressed.
If the door lid is closed.
If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
If the motor belt is loosened.
Note: During the de spin process, if washing are piled at one side of the spin barrel,
it will cause unbalance of spin barrel resulting in striking. At this moment, the
computer inside the washer will feel this unbalance phenomenon and will automatically
correct it ( fill in water Washing ). However, if unbalance situation is not removed after
continuous three corrections, which means the computer auto-correction can not
resolve the problem. Then the user has to manually and evenly place the clothing
inside the barrel to solve the problem.
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine without
permission.
If the washer can not work normally, or appear abnormity or alarms, please check and
correct as follows.
If the water drain hose is placed very high.
If the end of water drain hose is sealed in pond.
If the internal rubber ring of drain valve is blocked by dirt.
If the power is off or the fuse is burned out.
If the power supply voltage is too low.
If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
If it is set to "Delay" washing mode. (It will only start to work
until the reservation time reached)
Cleaning and Maintenance of the washing machine
End of program
The washing machine will send off the
sound of “dou-dou” at the end of any
program operation to remind you to take
out the laundry or operate it again.
After the sound, the washing machine
returns to its power-off state with no
display and all lights off.
Please shut off the tap, pull out the plug
when not in use to avoid water leakage or
the fire accidents.
Maintenance
Use gentle clothing to wipe off the water and
dirt on the surface each time after using the
washing machine. Detergent, propellant and
other chemicals are not allowed
to use so as to avoid any
damage to the plastic
accessories.
Clean the water inlet Clean Of the filter
After long time use, the water inlet mesh
bag may be blocked with smudginess, and
should be cleaned according to the
following steps:
1.Switch on the power, followed by shutting
off the tap.
2.Let the washer works for 5 seconds so
that water flows into the tub through the
water inlet hose. then turn off the power.
3.Unload the water inlet hose and clean
the mesh bag, then restore the water inlet
assembly.
After using the washing machine for a
period, please clean it according to the
following steps:
1.Take off the lint filter.
2.Turn over the mesh bag and wash it
clean in the water.
3.Restore it and fix it.
Note:If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1. Drain the water out of the
pump, under which use a
container to collect.
2. Loosen the pump
cover anticlockwise.
3. Take out the lint filter.
4. Clean the filter. 5. Restore it and adjust
the convex place to align
at the pump hole.
6. Tighten the pump cover
clockwise.
Clean the lint filter in the drain pump (only for having drain filter)
(only for normal filter)
After using the washing machine for aperiod,
please clean it according to the following steps:
1.Take out the lint filter.
2.Open the filter and wash it clean in the water.
3.Restore it and fix it.
(only for magic filter)

Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine
without permission.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct as follows.
Technical specifications
Size
Rated input power
Rated voltage
Rated frequency
Weight of the product
Maximum water
pressure permitted
in the water inlet
Minimum water
pressure permitted
in the water inlet
Model
Rated capacity of
wash and spinning
Falut Cause of fault Indication Alarm of the
buzzing sound
Drain Alarm
Alarm for
opening lid
Imbalance
Alarm
Water injection for about
30 mins, but do not reach
preset water level.
Open the lid during washing
or spinning process. Open
the lid after start the delay
time.
“E1”flares
“E2”flares
“E3”flares
“E4”flares
The buzzer goes
on buzzing for 10
seconds. If the
fault is not solved,
buzzes again for
10 seconds in
every 15minutes.
Open the lid to
deal with faults,
then close the
lid to stop the
alarm.
Alarm for
water inlet
Checked imbalance for
the third time.
480W
240V~
50Hz
0.6Mpa
0.1Mpa
34kg
7.0kg
550X565X930(mm)
(dry clothes)
Stopping alarm
Drain off water 10 mins not
arrive at empty water level.
Note:The program which has E4 alarm when shocked in the first time is “Drum Clean”.
19
WMTL7KGWH