Avipas AV-1071 User manual
2
Preface
Thanks for using this HD Video Conferencing Camera.
This manual introduces the functions, installation process and operation of the HD camera. Prior to
installation and usage, please read the manual thoroughly.
Precautions
This product should only be used under the specified conditions in order to avoid any damage to
the camera:
Do not subject the camera to rain or moisture.
Do not remove the cover. Otherwise, you may risk receiving an electric shock. In case of
unintended equipment operation, contact an authorized engineer.
Never operate under unspecified temperature, humidity or power supply.
Please use soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted
neuter detergent; do not use any type of solvents, which may damage the surface.
Note:
This is a class A production. Electromagnetic radiation at certain frequencies may affect the image
quality of TV in home environment.
3
Contents
Note.........................................................................................................................................................4
Supplied Accessories ...............................................................................................................................4
Quick Start............................................................................................................................................... 5
Features ...................................................................................................................................................6
Main Units...............................................................................................................................................9
Dimensions............................................................................................................................................10
IR Remote Control Menu ...................................................................................................................... 11
RS-232 Interface....................................................................................................................................13
Serial Communication Control ..............................................................................................................14
PTZ over TCP/UDP............................................................................................................................... 14
Menu Settings........................................................................................................................................15
Network Function..................................................................................................................................20
Maintenance and Troubleshooting.........................................................................................................29
4
Note
Electric Safety
Installation and operation must accord with electric safety standard.
Use caution to transport
Avoid stress, vibration or soakage in transport, storage and installation.
Polarity of power supply
The power supply of this product is +12V, the max electrical current is 2A. Polarity of the power
supply plug is shown in the drawing below.
Installation precautions
Do not grasp the camera lens when carrying it. Do not touch camera lens by hand. Mechanical
damage may result from doing so.
Do not use in corrosive liquid, gas or solid environment to avoid any cover (plastic material)
damage.
Make sure there is no obstacle within rotation range.
Do not power on before installation is completed.
Do not dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
Certain frequencies of electromagnetic field may affect the image of the camera!
SuppliedAccessories
When unpacked, check if all supplied accessories are included:
Camera ..............................................................................1PCS
AC power adaptor .............................................................1PCS
Power cord..........................................................................1PCS
RS232 cable........................................................................1PCS
Remote control....................................................................1PCS
User manual........................................................................1PCS
5
Quick Start
Step1. Check if connections are correct before starting.
Step2. Power on, check if the power light is on (front panel).
Step3. Pan-Tilt function rotates the camera to its maximum position of top right upon startup, then it
returns to the center, and the process of initialization is finished. (Note: if there is an entry for position
preset 0, the corresponding position preset 0 will be called up after initialization.)
6
Features
New design
Designed with worm gear transmission, completely new look, mini size.
1080p full HD
Support Panasonic's 1/2.7 inch, 2.07 million effective pixels with high quality HD CMOS sensor. The
camera can reach a maximum image resolution of 1920 x 1080.
Ultra-high frame rate
The output frame rate can extend up to 60fps in 1080p.
72.5° wide-angle lens + 16x digital zoom
The camera uses 72.5° wide-angle high-quality lens, which supports 12x optical zoom and 16x digital
zoom.
AAC audio encoding
The camera supportsAAC audio encoding, better sound quality and smaller bandwidth.
Low-light
The high SNR of the CMOS sensor combines with 2D and 3D noise reduction algorithm, and
effectively reduces noise. Even under low illumination conditions, clear images can still be acquired.
Remote control
The camera uses RS232/485 interface. All camera parameters can be controlled remotely via
high-speed communication.
7
Product Specifications
Name
HD Video Conferencing Camera
Camera
Video System
HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60,
720p/50,720p30,720p25
Sensor
1/2.7'', CMOS, Effective Pixel: 2.07M
Scanning Mode
Progressive
Lens
12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8
Digital Zoom
16x (optional)
Minimal Illumination
0.5 Lux @ (F1.8, AGC ON)
Shutter
1/30s ~ 1/10000s
White Balance
Auto, Indoor, Outdoor, One Push, Manual
Backlight Compensation
Support
Digital Noise Reduction
2D&3D Digital Noise Reduction
Video S/N
≥55dB
Horizontal Angle of View
72.5° ~ 6.9°
Vertical Angle of View
44.8° ~ 3.9°
Horizontal Rotation Range
±170°
Vertical Rotation Range
-30° ~ +30°
Pan Speed Range
1.7° ~ 100°/s
Tilt Speed Range
0.7° ~ 28°/s
H & V flip
Support
Image Freeze
Support
Number of Preset
255
Preset Accuracy
0.1°
IPC Features
Video coding standard
H.265/H.264/MJEPG
Video Stream
First stream, Second stream
8
First stream resolution
1920x1080,1280x720,1024x576,960x540,640x480,640x360
Second stream resolution
1280x720,1024x576,720x576(50Hz),720x480(60Hz),720x408,640x360,480x
270,320x240,320x180
Video Bit Rate
32Kbps ~ 20480Kbps
Bit Rate Type
Variable rate, Fixed rate
Frame Rate
1fps ~ 30fps
Audio encode standard
AAC
Audio stream rate
96Kbps, 128Kbps, 256Kbps
Support protocols
TCP/IP, HTTP, RTSP, RTMP, ONVIF, DHCP, Multicast, etc.
Input/Output Interface
HD Output
1xHDMI: Version 1.3
Network interface
1xRJ45: 10M/100M Ethernet Interface
Audio Interface
1-ch 3.5mm audio interface, Line In
Communication interface
1xRS-232: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/
Pelco-P
Power jack
JEITA type (DC IN 12V)
Generic Specification
Input Voltage
DC 12V
Current Consumption
1.0A (Max)
Operating Temperature
-10°C ~ 40°C (14°F ~ 104°F)
Storage Temperature
-40°C ~ 60°C (-40°F ~ 140°F)
Power Consumption
12W (Max)
MTBF
>30000h
Size
128.5mm x 118.0mm x 156.2mm
Net Weight
0.9K g
9
Main Units
1. RJ45 interface 3. LINE IN interface
2. HDMI interface 4. RS232 interface
5. DC IN 12V interface
10
Dimensions
11
IR Remote Control Menu
1. Standby Button
Press this button to enter standby mode.
Press it again to enter normal mode. (Note:
Power consumption in standby mode is
approximately half of the normal mode).
2. Position Buttons
To set or call preset.
3. *Button
For use with other buttons.
4. Set/ Preset Buttons
Set/ Preset: to store a preset position.
[SET/ PRESET] + Numeric button (0-9): to
set a corresponding numeric key for the
preset position.
5. Pan-Tilt Control Buttons
Press the Pan-Tilt buttons to move back to
the middle position
6. Back Buttons
Press the OSD menu to return to the previous
page.
7. Zoom Buttons
Slow zoom: Zoom-in [+] or Zoom-out [-]
slowly.
Fast zoom: Zoom-in [+] or Zoom-out [-] fast.
8. Pan-Tilt L/R set
Press 1 or 2 button to set the direction of the Pan-Tilt.
L/R Set +1[STD]: set the Pan-Tilt to turn the same direction as the L/R Set.
L/R Set +2[REV]: set the Pan-Tilt to turn the opposite direction from the L/R Set.
9. Focus Buttons
For use of focus adjustment.
Press [AUTO] to adjust the focus on the center of the object automatically. To adjust the focus
12
manually, press [MANUAL]. Adjust focus with
[Far] (focus on far object) or [NEAR] (focus on
near object).
10. Camera Select Buttons
Press the button corresponding to the camera
being operated with the remote control.
11. # Button
For use with other buttons.
12. Camera IR Address Setup Buttons
[*]+[＃]+[F1]: Address1
[*]+[＃]+[F2]: Address2
[*]+[＃]+[F3]: Address3
[*]+[＃]+[F4]: Address4
13. Clear Preset Buttons
Clear preset: erase a preset position.
[CLEAR PRESET] + Numeric button (0-9)
individually.
Or: [*]+[#]+[CLEAR PRESET]: erase all the
preset positions.
14. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and tilting.
Press [HOME] to reposition the camera back to
front.
15. Menu
Menu: enter or exit OSD MENU.
16. BLC (BackLight Compensation) Button
BLC ON/OFF: press this button to enable the
backlight compensation. Press it again to disable
the backlight compensation. (NOTE: effective
only in auto exposure mode).
Note: if there is a light source behind the subject,
the subject will become dark. In this case, press
the backlight ON/OFF button to adjust.
17. Pan/Tilt Reset
Preset Pan/Tilt self-test.
18. Image Freezing Function
Manually Freeze: enable the freezing function by
pressing [F4] on the remote control. "Freeze" will
display on the upper left corner of the screen, and
will disappear automatically after 5 seconds. Press
[F4] again to return to normal mode. "Unfreeze"
will display on the upper left corner of the screen,
and will disappear automatically after 5 seconds.
Recall Preset Image Freeze：use "Recalling
Preset Image Freeze" function in the OSD Menu.
After the function is activated, the screen pauses.
It can then be switched to any preset position by
pressing the corresponding number.
19. Shortcut Setup
[*]+[＃]+[1]: OSD menu default English
[*]+[＃]+[3]: OSD menu default Chinese
[*]+[＃]+[4]: Default IP address
[*]+[＃]+[5]: Save OSD
[*]+[＃]+[6]: Quick default reset
[*]+[＃]+[8]: Look up camera version
[*]+[＃]+[9]: Quick inversion setup
13
RS-232 Interface
Camera Windows DB-9
1.DTR 1.CD
2.DSR 2.RXD
3.TXD 3.TXD
4.GND 4.DTR
5.RXD 5.GND
6.GND 6.DSR
7.IR OUT 7.RTS
8.NC 8.CTS
9.RI
Camera Mini DIN
1.DTR 1.DTR
2.DSR 2.DSR
3.TXD 3.TXD
4.GND 4.GND
5.RXD 5.RXD
6.GND 6.GND
7.IR OUT 7.NC
8.NC 8.NC
No.
Function
1
DTR
2
DSR
3
TXD
4
GND
5
RXD
6
GND
7
IR OUT
8
NC
14
Serial Communication Control
In the default working mode, the camera is able to connect to a VISCA controller with RS232C
serial interface.
➢RS232 Communication Control:
The camera can be controlled via RS232. Parameters are as follows:
Bit rate: 2400/4800/9600/38400 bit/s.
Start bit: 1 bit.
Data bit: 8 bits.
Stop bit: 1bit.
Parity bit: none.
Pan-Tilt function rotates the camera to its maximum position of top right upon startup, then it
returns to the center, and the process of initialization is finished. (Note: if there is an entry for position
preset 0, the corresponding position preset 0 will be called up after initialization.) Then user can control
the camera with commands in the command list.
PTZ over TCP/UDP
A TCP server is embedded in camera, port number 5678. When the user establishes a TCP
connection with the server, and sends a PTZ control command to the server, the server will parse and
execute the PTZ command.
A UDP server is embedded in camera, port number 1259. When the user sends a PTZ control
command, the server will parse and execute the PTZ command.
15
Menu Settings
1. MENU
Press [MENU] to display the main menu on
the screen. Use the arrow buttons to move the
cursor. Press [HOME] to enter the corresponding
sub-menu.
2. EXPOSURE
Move the cursor to Exposure in the main
menu and press [HOME], EXPOSURE menu is
shown below.
Mode: Exposure mode. Options: Auto,
Manual, SAE, AAE, Bright.
ExpCompMode: Exposure compensation
mode. Options: On, Off (effective only in Auto
mode).
ExpComp: Exposure compensation value.
Options: -7 ~ 7 (effective only when
ExpCompMode is On).
Backlight: Set the backlight compensation.
Options: On, Off (effective only in Auto mode).
Gain Limit: Maximum gain. Options: 0 ~ 15
(effective only in Auto, AAE, and Bright mode).
Anti-Flicker: Options: Off, 50Hz, 60Hz
(effective only in Auto and Bright mode).
Meter: Options: Average, Center, Bottom,
Top.
DRC: DRC strength. Options: 0 ~ 8.
EXPOSURE
Mode Auto
ExpCompMode Off
Backlight Off
Gain Limit 3
Anti-Flicker 50Hz
Meter Average
DRC 2
Select Item
Change Value
[Menu] Back
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Setup
Communication Setup
Restore Default
[Home] Enter
[Menu] Exit
16
Bright: Bright intensity control. Options:
00~17 (effective only in Bright mode).
Iris: Aperture value. Options: F1.8, F2.0,
F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6,
F11.0, Close (effective only in Manual and AAE
mode).
Shut: Shutter value. Options: 1/30, 1/60, 1/90,
1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725,
1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000,
1/10000 (effective only in Manual and SAE
mode).
3. COLOR
Move the cursor to Color in the main menu
and press [HOME], COLOR menu is shown
below.
WB Mode: White balance mode. Options:
Auto, Indoor, Outdoor, One Push, Manual.
RG: Red gain. Options: 0~255 (effective only
in Manual mode).
BG: Blue gain. Options: 0~255 (effective
only in Manual mode).
RG Tuning: Red gain fine-tuning. Options:
-10 ~ +10 (effective only when AWBsens is Low).
BG Tuning: Blue gain fine-tuning. Options:
-10 ~ +10 (effective only when AWBsens is Low).
Saturation: Options: 60% ~ 200%.
Hue: Chroma adjustment. Options: 0 ~ 14.
AWBsens: White balance sensitivity. Options:
Normal, High, Low.
4. IMAGE
Move the cursor to Image in the main menu
and press [HOME], IMAGE menu is shown
below.
COLOR
WB Mode Auto
RG Tuning +2
BG Tuning 0
Saturation 100%
Hue 7
AWB sens Low
Select Item
Change Value
[Menu] Back
17
Luminance: Brightness adjustment. Options:
0~14.
Contrast: Contrast adjustment. Options:
0~14.
Sharpness: Sharpness adjustment. Options:
Auto, 0~15
Flip-H: Flip image horizontally. Options: On,
Off.
Flip-V: Flip image vertically. Options: On,
Off.
B&W-Mode: Greyscale display. Options: On,
Off.
Gamma: Options: Default, 0.45, 0.5, 0.56,
0.63.
Style: Options: Norm, Clarity, Bright, Soft,
5S.
5. P/T/Z
SpeedByZoom: Depth of field scale
adjustment. Options: On, Off.
AF-Zone: Focusing area of interest. Options:
Top, Center, Bottom.
AF-Sense: Automatic focusing sensitivity.
Options: Low, Normal, High.
L/R Set: Options: STD, REV.
Display Info: Options: On, Off.
Image Freeze: Options: On, Off.
Digital Zoom: Options: On, Off.
Call Preset Speed: Options:1~24.
6. NOISE REDUCTION
Move the cursor to Noise Reduction in the
main menu and press [HOME]. NOISE
REDUCTION menu is shown below.
P/T/Z
SpeedByZoom On
AF-Zone Center
AF-Sense High
L/R Set STD
Display Info On
Image Freeze Off
Digital Zoom Off
Call Preset Speed 24
Select Item
Change Value
[Menu] Back
IMAGE
Luminance 7
Contrast 7
Sharpness 2
Flip-H Off
Flip-V Off
B&W-Mode Off
Gamma Default
Style Clarity
Select Item
Change Value
[Menu] Back
18
NR2D-Level: 2D noise reduction. Options:
Off, Auto, 1 ~ 5.
NR3D-Level: 3D noise reduction. Options:
Off, 1 ~ 8.
D-HotPixel: Dynamic bad points. Options:
Off, 1 ~ 5.
7. SETUP
Move the cursor to Setup in the main
menu and press [HOME]. SETUP menu is
shown below.
Language: Menu language. Options: English,
Chinese, Russian.
DVI Mode: Options: DVI, HDMI.
Note:
When switch the camera from DVI mode to
HDMI mode, user needs to save the change and
restart camera. There will be embedded audio in
HDMI output.
Video Format: Options: 1080P60,1080P50,
720P60,720P50,1080P30,1080P25,720P30,720P2
5.
8. COMMUNICATION SETUP
Move the cursor to Communication Setup in
the main menu and press [HOME].
COMMUNICATION SETUP menu is shown
SETUP
Language EN
DVI Mode DVI
Video Format
1080P60
Select Item
Change Value
[Menu] Back
NOISE REDUCTION
NR2D-Level 3
NR3D-Level 3
D-HotPixel Off
Select Item
Change Value
[Menu] Back
19
below.
Protocol: Control protocol type. Options:
AUTO, VISCA, PELCO-D, PELCO-P.
V_Address: Protocol address, should be
consistent with the agreement. Options: AUTO,
VISCA.
P_D_Address: PELCO-D protocol. Options:
0 ~ 254.
P_P_Address: PELCO-P protocol. Options: 0
~ 31.
V_AddrFix: Change serial port using infrared
switch. Options: On, Off (when set to On,
command 88 30 01 FF becomes invalid).
Net Mode: Set the serial port control pattern.
Options: Serial, Paral.
Baudrate: Serial port baud rate. Options:
2400, 4800, 9600, 38400.
9. RESTORE DEFAULT
Move the cursor to Restore Default in the
main menu and press [HOME]. RESTORE
DEFAULT menu is shown below.
Restore: Restore factory settings. Options:
Yes, No.
Note: Press [HOME] to confirm. All
parameters will be reset to default values,
including IR Remote address and VISCA
address.
Save: Save settings. Options: Yes, No.
RESTORE DEFAULT
Restore? No
Change Value
[Home] OK
[Menu] Back
COMMUNICATION SETUP
Protocol VISCA
V_Address 1
V_AddrFix Off
Net Mode Serial
Baudrate 9600
Select Item
Change Value
[Menu] Back
20
Network Function
1Operating Environment
Operating System: Windows 2000/2003/XP/
vista/7/8.
Network Protocol: TCP/IP.
Client PC: P4/128MRAM/40GHD/ supports
scaled graphics card, DirectX8.0 or more
advanced version.
2Equipment Installation
1) Connect internet camera to a wireless
network (Wi-Fi) or to your PC directly via
internet cable.
2) Turn on DC12V power.
3) When the orange light on the internet port
lights up (green light flashing), the physical
connection is complete.
3Internet Connection
There are 2 ways of connecting the camera to
your computer.
Connect by Ethernet cable
Connect via router /interchanger
4IP camera visited/ controlled by LAN
4.1 Setup IP address
IP camera’s default IP address is 192.168.
100.88. For unknown camera IP, follow the
instructions to reveal:
Method 1: press * and # and 4 on remote
control in order, the camera’s IP address will
display on screen.
Method 2: connect the camera to a PC with
Ethernet cable. Use “upgrade_En.exe”to search
for the IP address.
To change IP address, follow these steps:
Method 1: On the web control page, click
“Network”> change IP > click “Apply”> restart
camera.
Method 2: Open “upgrade_En.exe”; change
IP and click “Set”. After modifying, restart IP
Table of contents