BalanceBox 650 User manual

1
Installation manual
© COPYRIGHT – document number: 902936-00 – note: product specifications may change without prior notice.
BalanceBox®650
Floor Support
item number: 481A14001

2
BalanceBox®650 Floor Support
document number: 902936-00
General Warnings
Tools

3
BalanceBox®650 Floor Support
document number: 902936-00
Content of the box
(2x) E
(3x) C
(2x) D
(2x) A
(2x) B
(1x) H
(4x) G
(1x) E

4
BalanceBox®650 Floor Support
document number: 902936-00
Content of Bag with Screws [E]
1Assemble the profiles
[1:1]
(8x) J
(8x) K
(20x) L
(20x) M
(14x*) N* 2x spare
A
B
A
B
PIN
PIN

5
BalanceBox®650 Floor Support
document number: 902936-00
2Mount 4x plastic spring [N] on each wall bracket [C]
(12x) N
N
(3x) C

6
BalanceBox®650 Floor Support
document number: 902936-00
3Insert 6 screws [M] in each profile as shown
(6x) M(6x) M
(12x) M

7
BalanceBox®650 Floor Support
document number: 902936-00
4Place all 3 wall brackets [C] over the screws and mount each wall bracket with 4 nuts [L]
Make sure the middle wall bracket connects the aluminum profiles.
(12x) L
20 cm
8 in
20 cm
8 in
C
C
C
L
L
Tighten:
25 Nm
18 ft-Lbs

8
BalanceBox®650 Floor Support
document number: 902936-00
M
5Insert 4 screws [M] in each profile as shown.
(8x) M

9
BalanceBox®650 Floor Support
document number: 902936-00
6Place 2 interface brackets [D] over the screws and mount each interface bracket with 4 nuts [L]
Tighten the nuts by hand. The height setting of the BalanceBox®650 will follow.
7Mount the profile covers [G] on each end of the profile by using the fasteners [K]
Tap the fasteners in with a mallet.
(8x) L
(8x) K
K
(4x) G
D
D
L
Tighten:
25 Nm
18 ft-Lbs

10
BalanceBox®650 Floor Support
document number: 902936-00
8
Place the floor support against the wall. If needed reposition the top and bottom wall bracket.
Mark at least 4 holes per wall bracket, 2 holes left and 2 holes right. Do this for all 3 wall brackets.
Remove the floor support from the wall and drill the holes. Mount the floor support to the wall.
9
Define how high the BalanceBox®650 needs to be. Use the mounting height calculator on the website.
Depending on the BalanceBox®650 version the interface brackets need to be mounted as shown below.
Loosen the nuts in order to adjust the height of the interface brackets. After adjusting tighten the nuts well.
Floor to wall bracket:
5 – 30 cm / 2 – 12 in
Minimal height: 200 cm / 80 in
BalanceBox®650 Mk.1 (Grey):
484A07, 484A08, 484A09, 484A10
BalanceBox®650 Mk.2 (Black):
484A17, 484A18, 484A19, 484A20
≥ 2 ≥ 2
Tighten:
25 Nm
18 ft-Lbs

11
BalanceBox®650 Floor Support
document number: 902936-00
10 Mount the wall bracket to the lower interface bracket [D] of the floor support.
Use 4x screw [J] Tighten well.
J
J
J
J
Tighten:
25 Nm
18 ft-Lbs
(4x) J

12
BalanceBox®650 Floor Support
document number: 902936-00
11
Make sure all covers of the BalanceBox®650 are removed according manual.
Mount the BalanceBox®650 onto the floor support. Place the BalanceBox®650 onto the wall bracket.
Use 4 screws [J] to secure the BalanceBox®650 at the top.
BalanceBox®650 Mk.1 (Grey):
484A07, 484A08, 484A09, 484A10
BalanceBox®650 Mk.2 (Black):
484A17, 484A18, 484A19, 484A20
J
J
JJ
J
J
J
J
Tighten:
25 Nm
18 ft-Lbs
Tighten:
25 Nm
18 ft-Lbs
(4x) J
(4x) J

13
BalanceBox®650 Floor Support
document number: 902936-00
12 Secure the BalanceBox®650 on each side to the wall bracket.
Use 2x screw included with the BalanceBox®650.
BalanceBox®650 Mk.1 (Grey):
484A07, 484A08, 484A09, 484A10
BalanceBox®650 Mk.2 (Black):
484A17, 484A18, 484A19, 484A20
902811 902947
13 After mounting the BalanceBox®650, place all covers back according to the manual.
Tighten:
10 Nm
7.4 ft-Lbs
2x

14
BalanceBox®650 Floor Support
document number: 902936-00
14 Place 2 covers [E] on the wall brackets [C] that are visible
2x
21 3

15
BalanceBox®650 Floor Support
document number: 902936-00
15 For mounting the VESA bracket #481A70 to the BalanceBox®650,
please follow manual 902916 (including with 481A70) 902916

16
Regout Balance Systems B.V.
Industrieweg 40
6219 NR Maastricht
The Netherlands
Thomas Regout Inc.
145 Bluffs Court
Canton, GA 30114
USA
© COPYRIGHT – document number: 902936-00 – note: product specifications may change without prior notice.