Best Choice Products SKY5969 User manual

SKY5969 + SKY6009Ver. 1
Kitchen Playset
INSTRUCTION
MANUAL

•This product requires adult assembly and supervision when in use.
•This product is intended for indoor use only.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
•This product contains small parts. May result in choking hazard for children under 3 years.
•To wipe down item, use a damp cloth. Then, wipe it down once more with a dry cloth.
AGE RANGE: 3 years old and up
HARDWARE
A
28 PCS
SCREW DOWEL
B
38 PCS
SCREW
C
22 PCS
SCREW
D
50 PCS
TOOLS REQUIRED
UP TO 60 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
HAMMER
(OPTIONAL)
DRILL
(OPTIONAL)
CHOKING HAZARD -Small parts.
Not for children under 3 years old.
ADULT ASSEMBLY REQUIRED
WARNING
Please retain these instructions for future reference.
2|
NOTICE

| 3
HARDWARE
M
1 PC
TAPS SMALL HINGE
PEG
N
5 PCS
SINK
O
1 PC
WAL NAIL
P
1 PC
Q
1 PC
WALL
ANCHOR
WALL
WASHER
R
1 PC
DISK
WASHER
S
1 PC
OVEN
HANDLE
T
1 PC
U
1 PC
HANDLE
HOLDER
PHONE
RECEIVER
V
1 PC
PHONE
W
1 PC
Y
1 PC
BURNERS RIGHT
HOLDING PEG
Z1
1 PC
LEFT
HOLDING PEG
Z2
1 PC
SUPPORTS
X
4 PCS
E
3 PCS
SCREW SCREW
F
22 PCS
MICROWAVE
HANDLE
G
1 PC
LARGE HINGE
PEG
H
1 PC
I
4 PCS
HANDLE DOOR CATCH
J
5 PCS
DOOR INSERT
K
5 PCS
FAUCET
L
1 PC

4|
7
1 PC
LOWER SHELF
PARTS
1 PC
PANTRY BACK
4
1 PC
UPPER SHELF
5
1 PC
COUNTER PANEL
9
8
1 PC
COUNTERTOP
1 PC
SHELF DIVIDER
6
1 PC
UPPER SHELF BACK
10
1 PC
MIDDLE SHELF BACK
11
1 PC
BASE
12
1 PC
PANTRY LEFT
1
1 PC
PANTRY DIVIDER
2
1 PC
PANTRY RIGHT
3

| 3
19
1 PC
SINK BACK PANEL
PARTS
1 PC
SINK CUPBOARD
16
1 PC
OVEN DOOR
17
1 PC
REFRIGERATOR DOOR
21
20
1 PC
PANTRY DOOR
1 PC
OVEN BACK PANEL
18
1 PC
OVEN SIDE PANEL
22
1 PC
PANTRY TOP
23
1 PC
ICE DISPENSER
24
13
1 PC
SKIRT
1 PC
SINK/OVEN DIVIDER
15
14
1 PC
MICROWAVE

BEFORE ASSEMBLY
2
1Insert two part B dowels into the part 5
upper shelf.
Insert four part B dowels into the part 6
shelf divider.
4
3Attach one part I handle to the part 16
sink cupboard door with two part F
screws.
Attach one part K door insert and one
part H hinge peg with four part D
screws, two screws each.
Insert four part B dowels into the part 8
countertop.
Attach two part M taps and one part L
faucet with three part E screws, one
screw each.
Attach two part Y burners with eight
part F screws.
2|
5
B
B6
B
B
B
B
16
D
D
IF
F
HD
D
L
M
EEE
8
M
B
B
B
B
F
Y
Y
F
F
F
F
F
F
F

| 3
6
5Insert four part B dowels into the
part 12 base.
Attach four part X supports to the part
11 middle shelf back with four part C
screws.
8
7Attach one part I handle to the part 17
oven door with two part F screws.
Attach one part K door insert and one
part N hinge peg with four part D
screws, two screws each.
Insert four part B dowels into the part 7
lower shelf.
B B
B B
12
C
X
C
X
C
X
C
X
1 1
D
D
I
F
17
F
D
N
D
B
7B
B
B
BEFORE ASSEMBLY

4|
10
9Insert two part B dowels into the part 9
counter panel.
Attach one part Z2 left holding peg and
one part Z1 right holding peg with four
part D screws, two screws each.
Insert two part B dowels into the part 13 skirt.
12
11 Insert four part B dowels into the part 2
pantry divider.
Insert two part B dowels into the part 22
oven side panel.
Attach two part U handle holders with
two part F screws.
Place the part T oven handle between
the two handle holders.
13
B
B
22
F
F
T
U
U
B
B
BEFORE ASSEMBLY
2
B
B
B
B
9
B
B
D
D
D
D
Z2
Z1

| 3
14
13 Attach one part G microwave handle to
the part 14 microwave door with two
part F screws.
Attach one part K door insert and one
part N hinge peg with four part D
screws, two screws each.
Insert four part B dowels into the part 3
pantry right.
Attach the part V phone receiver with
two part F screws.
16
15 Insert two part B dowels into the part 1
pantry left.
Insert four part B dowels into the part 15
sink/oven divider.
BEFORE ASSEMBLY
D
G
14 D
D
N
D
F
F
B
B
3
F
F
V
B
B
1
BB
15
B
B
B
B

4|
18
17 Attach one part I handle to the part 20
pantry door with two part F screws.
Attach one part K door insert and one
part H hinge peg with four part D
screws, two screws each.
Attach one part I handle to the part 21
refrigerator door with two part F screws.
Attach one part K door insert and one
part H hinge peg with four part D
screws, two screws each.
2
1Attach the part 13 skirt to the part 12
base with two part A screws.
Attach the part 3 pantry right to the
base with two screws.
20
HD
D
I
F
F
D
D
21
D
D
IF
F
HD
D
BEFORE ASSEMBLY
PRODUCT ASSEMBLY

| #
PRODUCT ASSEMBLY
4
3Locate the part 2 pantry divider and
insert it into the part 3 pantry right.
Attach the part 1 part pantry left with
two part A screws and secure the
divider with four part A screws.
Attach the part 15 sink/oven divider to
the base with three part A screws.
6
5Attach the part 8 countertop to the part
15 divider with one part A screw.
Secure the countertop to the part 3
pantry right with two part A screws.
Attach the part 15 counter panel to the
countertop.
Attach the part 5 upper shelf to the part
6 shelf divider with one part A screw.
Attach the part 7 lower shelf to the part
6 shelf divider with one part A screw.

4|
PRODUCT ASSEMBLY
7Insert the part 4 pantry back between the pantry sides.
Attach the shelf assembly to the part 3 pantry right and secure with two part A screws.
8Attach the part 23 pantry top to the pantry sides with four part A screws.
Attach the part 22 oven side and secure with six part A screws.

| 3
PRODUCT ASSEMBLY
10 Attach two part J door catches to the part 3 pantry right with four part D screws.
Attach two part J door catches to the part 15 divider with four part D screws.
Attach one part J door catch to the part 6 shelf divider with two part D screws.
9Secure the part 10, 11, 18, and 19 back panels with eighteen part C screws and seven part S disk washers.

4|
PRODUCT ASSEMBLY
12 Attach the part 24 ice dispenser to the part 21 refrigerator door with six part D screws.
11 Insert the hinge peg on the part 20 pantry door into the opening on the part 23 pantry top.
Insert one part N hinge peg into the opening on the part 2 pantry divider, and secure to the
pantry door with two part D screws.
24

| #
PRODUCT ASSEMBLY
13 Insert the hinge peg on the part 21 refrigerator door into the opening on the part 2 pantry divider.
Insert one part N hinge peg into the opening on the base and secure to the pantry door with two
part D screws.

4|
PRODUCT ASSEMBLY
14 Insert the hinge peg on the part 16 sink cupboard door into the opening on the part 9 counter panel.
Insert one part N hinge peg into the opening on the part 12 base, and secure to the part 16
cupboard door with two part D screws.

PRODUCT ASSEMBLY
15 Insert the hinge peg on the part 17 oven door into the opening on the part 9 counter panel.
Insert one part H hinge peg into the opening on the part 12 base, and secure to the part 17 oven
door with two part D screws.
| 3

PRODUCT ASSEMBLY
16 Insert the hinge peg on the part 14 microwave door into the opening on the part 5 upper shelf.
Insert one part H hinge peg into the opening on the part 7 lower shelf, and secure to the part 14
oven door with two part D screws.
4|

PRODUCT ASSEMBLY
17 Combine the part P wall nail, part R wall washer, and part Q wall anchor and use a hammer to
drive the nail into the wall through the opening on the part 4 pantry back.
Insert the part O sink.
NOTE: This step is optional
| 3

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!