Beta Three Veyron Series User manual

18" Active Subwoofer Speaker System
Series Professional Speaker System
Users Manual
UM - VR1 1 8 SUBa - 2 0 1 8 0 8 1 6 Ve r A

1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read the instruction first before using this product.
Pay attention to all warnings.
Obey all operating instructions.
Do not expose this product to rain or moisture.
Do not block any ventilation openings. Install according to instructions .
Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation .
Only use spare parts by manufacturer.
Pay attention to the safety symbol on the of the cover.
manual
Please keep this manual for future reference
Clean this equipment with a dry cloth.
manufacturer's
a
supplied the
outside
SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL FIRST
Thank you for buyin product. Read this manual first as it will help you operate the system properly. Please keep this manual
for future reference.
g
WARNING:
This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with
the product, please ensure they comply with the local safety codes.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and servicing instructions.
ATTENTION: Don't refit the system or spare parts without being authorized as this will .void the warranty
WARNING: Don't (such as candles) the equipment.place naked flames close to
版本 第2页 共10页
文件（图）号
商品劳务号
物品规格
物品类别
物品名称
（图名）
三基音响科技有限公司
101.05.0009.03409
三基/β3/VR118SUBa
A
专业音箱
英文说明书

2
4
5
3
3
3
3
4
5
5
6
6
6
7
CONTENT
Features
Description
Applications
INSTALLATION
Installation Accessories
Installation Reference
Product Introduction
Technical Sheet
2D Dimension
TECHNICAL SPECIFICATION
Amplifier Module
CONTENT
Product information subjeets to be without notification,
Please visit www.beta3pro.com for lastest update.
updated
Frequency Response
Introduction of Amplifier Module
Series Professional Speaker System
版本 第3页 共10页
文件（图）号
商品劳务号
物品规格
物品类别
物品名称
（图名）
三基音响科技有限公司
101.05.0009.03409
三基/β3/VR118SUBa
A
专业音箱
英文说明书

Series Professional Speaker System
3
VR118 SUBa
Single 18" Active Subwoofer Speaker System
PRODUCT INTRODUCTION
Single 18 inch low frequency inverted active
low frequency speaker.
Features:
natural, delicate and pleasant.
frequency divider design to make the sound quality
more
The speaker adopts the built-in low frequency electronic
The surface treatment of grill is made of powder spraying
technology. In the case of nondestructive, it can be used
for up to 5 years without rust. Waterproof filters are added
inside the grill to prevent external rainwater from entering
the woofer surface.
The paint and advanced painting technology used on
of the surface three times higher than that ordinary
process and paint.
Product description:
2-way input and 2-way output socket ,with independent
volume adjustment function .
Built-in high power amplifier module with DSP controller.
β3 VR118SUBa Speaker is one of the VEYRON series speaker
with a new shape structure and a new surface painting process
to form a low frequency speaker. It consists of a low-frequency
unit and a amplifier module. The bass unit uses the 100mm dia-
meter high power voice coil, the voice coil uses the round copper
wire, and outer wrapping method,the voice coil skeleton uses
When installed on this speaker, the rated power can reach 450W.
The design of the symmetrical magnetic circuit reduces the odd
harmonic distortion of the low frequency , which fully meets the
human demands for the low frequency sound quality.
Applications:
■Meeting Rooms
■Small Auditoriums
■Multifunctional Halls
■Religious Clubs
■Small Performances
VR118SUBa Acoustics Characteristics: clean, strong and
flexible.
surface of cabinet makes the anti-damage capability the
VR118 SUBa is made of 18mm thick laminate, its special
wooden wedge box structure, the whole speaker does not
use a nail. Surface polyurethane paint has a strong resista-
nce to wear. The tensile strength of the cabinet itself can
reach 4500N.The speaker cabinet has a special bracket that
can be used in conjunction with VR110. The speaker grill is
made of Q235, the surface is sprayed with powder, which
not only has a high strength, but also has a good resistance
The VR118SUBa speaker system is designed to be main-
tained. To reduce interference and improve sound quality.
small auditoriums, religious clubs, mobile performances
voice: clear, full, but powerful ,which is the sound quality
features of VR118SUBa and VERON series.
and other venues. Especially for the performance of human
are mainly used in meeting rooms, multi-function halls,
VR118SUBa speaker with VEYRON series full-range speakers
entering directly, and play a waterproof role.
to salt spray. The inner part of the iron network is covered
with cotton, which can prevent the external rain water from
the very high strength AL material, not only strengthens the sound
coil strength, but also increases the voice coil power bearing ability.
版本 第4页 共10页
文件（图）号
商品劳务号
物品规格
物品类别
物品名称
（图名）
三基音响科技有限公司
101.05.0009.03409
三基/β3/VR118SUBa
A
专业音箱
英文说明书

4
Amplifier Module
CONNECTION
Series Professional Speaker System
INP UT
PEA K PWR
GND DAT1 D AT2
OUT PUT
开
关
消耗电流：2.5A
S. N.
东莞市三基 音 响 科技有限公司
--
∞
--
∞
0 0
CH1 VO L CH2 VO L
CH1 C H2
USB
C 1H CH2
NORM AL
LINK
OUT PUT
INP UT
3000W
ACTIVE SUBWOOFER
RS-485
CH2
AMP O UTPUT
交流输入：
220-240V ~ 50/60Hz,
交流输出
额定消耗功率600W
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1.
CH1 channel and CH2 channel independent
and parallel selector switch
2. USB port
3. RS-485 input port
4. RS-485 output por
5. Fan
6. Power switch
7. CH1 Channel volume control
8. CH2 Channel volume control
9. CH1 channel signal input
10. CH2 channel signal input
11. CH1 Channel signal parallel output
12. CH2 Channel signal parallel output
13. CH2 channel amplifier output
14. AC power input
15. AC power output

5
INSTALLATION
VR118SUBa cabinet with bracket,which easy to install with
VR series full range speaker.
Installation:
Installation Accessories(Optional)
1、Speaker Bracket（101.06.0036.00090）
VR110
VR118SUBa
VR110
2、 （101.06.0036.00208）Mobile Caster
Mobile caster: 100*34mm 2PCS
Screw: M8*30 8PCS
Spring washer: 8(Black) 8PCS
Flat washer 8(Black) 8PCS
PE bag 2PCS
Carton 1PCS
φ
φ
：φ
：
：
M20-φ35
Series Professional Speaker System
3、Flying Frame
1、Hanging
VR110 Flying Frame
VR118SUBa
Subwoofer
VR110
Full Range Speaker
2. Complete Installation
Warning: All accessories should be with safety factor than or egual to 5:1 or refer to local safety standard .larger

6
TECHNICAL SPECIFICATION
Specification
Frequency Response and THD
: Frequency Response(-3dB)
Maximum SPL(1m):
Input Source Electromotive Force:
Input Impedance:
HF Cutting Point :
Connection:Pin 1:
Cooling:
Cabinet:
Carry:
Net weight:
Gross weight:
Connector:
Amplifier Modula Frequency Respond:
Input Type:
40Hz-100Hz
123dB/129dB(Peak)
1*18" LF
0 dBu(0.755V rms,1.4V peak) line 100Hz
20KΩ balance input,10KΩ unbalance input
100Hz
ground Pin 2:Singal+ Pin3:Sign-
Fan+ Heat sinks
2 input,2 output
50.0kg(110.0 lb)
55.0kg(121.0 lb)
18mm plywood
5 x wooden handle
Carnon input and signal Carnon output
40Hz-100Hz
Input Overload source EMF : Maximiam input level+20 dBV
(10 V rms,4 V peak)
1500W x 2
Power Cable: GB plug + NAC3FCA (Neutrik) plug
Safe Voltage Range :
220V-240V+/-10% AC
Amplifier Output Power:
Speaker Testing Method
1. Frequency Response
Use pink noise to test the speaker in the anechoic chamber,
adjust the level to make the speaker work at its rated impedance
and set the output at 1W, then test the frequency response power
1m away from the speaker.
2. Sensitivity
Use full range pink noise which has been modified using
an EQ speaker in the anechoic chamber, curve to test the
Increasing the work at its rated signal to make the speaker
impedance and set the the power output at 1W, then test
sensitivity 1m away from the speaker.
3. MAX.SPL
Use full range pink noise which has been modified using
an EQ speaker in the anechoic chamber , curve to test the
increase the work at its signal to make the speaker maxi-
mum power output level, then test the SPL 1m away from
the speaker.
4. Rated Power
Use pink noise to the IEC#268-5 standard to test the speaker,
increase the signal for a continuous period of 100 hours,
the rated power is the power when the speaker will show
no visible or measurable damage.
Series Professional Speaker System
Transducer:: 4Ω
Finish:
Black polyimide spray and grill with
black plastic powder coating
540 x 653 x 680mm(21.3x25.7x26.8in)
Dimension(W×D×H):
770 x 625 x825mm(30.3x24.6x32.5in)
Packing Dimension(W×D×H):
Frequency (Hz)
Sensitivity (dB)
Frequency Response
Impedance

7
TECHNICAL SPECIFICATION
2D Dimension
Bottom
653mm 540mm
680mm
Top View
Side View Front View Back View
Bottom View
Series Professional Speaker System

Notes:

www.beta3pro.com.