Birlea SOLO 3’ User manual

Vendor: S000053
Page 1 of 4
ASSEMBLY INSTRUCTIONS
SOLO 3’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SOLO 3’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000053
Page 2 of 4
Part Li t Hardware Li t (found in box 1)
Part De cription Box Qty Part De cription Qty
1 Headend 1 1 A 50mm Black Round Stopper 4
2 Footend 1 1 B M6 x 16 mm JCBC Screw 8
3 Side Support (with sticker) 2 2 C M6 x 40 mm JCBC Screw 4
4 Side Support 2 2 D M6 Nut 4
5 Base Leg 1 2 E Slat Cap 24
6 Mid Support 1 1 **M4 Allen Key Supplied.
7 Slat 3 12
Step 1: Fix the side supports (3) and (4) to the headend (1) and footend (2) using hardware part B but do not
fully tighten yet.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 3 of 4
Step 2: Place the base leg (5) in the middle of the side supports (3) and (4).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 3: Place the mid support (6) at the centre and screw together with the base leg (5) using hardware
parts C and D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 4 of 4
Step 4: Insert hardware part to the bed legs.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 5: Place hardware part E onto every end of each slat (7) then press firmly into the side supports (3) and
(4).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.