BROOMX MKPro User manual

12/1/21, 2:03 PM
MKPro User Manual
1/48
BROOMX TECHNOLOGIES
MKPro User Manual
OVERVIEW
The MKPro
The MKPro is an immersive projection system to enjoy 360 media and interactive Virtual Reality
applications in physical spaces, socially and headset free.
It is compact, portable and easy to use. It includes a projection module, CPU, GPU, built in audio
speaker, dual ethernet connection. It is controlled using an iOS application or a cross-platform
Web Manager, enabling users to display and navigate through an extensive catalog of included
content, as well as upload and manage their personal content.
Technical Specifications
If your browser allows it, you can use [ctr] - [f] so search for keywords within this manual.

12/1/21, 2:03 PM
MKPro User Manual
2/48
General:
Power consumption: 650 Wh
Size: 75x 60 x 29 cm
Weight: 39Kg
Size with flight case: 90 x 77 x 65 cm
Weight with flight case: 74Kg
Projector:
Technology: 3LCD
Resolution: WUXGA 1080p, 1920x1080p, 16:10
Light output: 5200 Lumens
Color Depth: 1.073 billion colors
Contrast ratio: 60,000:1
Field of View: Horizontal: 185° / Vertical: 90°
Lens Shift: Vertical
Focus: Manual
Video Processing: 12bits

12/1/21, 2:03 PM
MKPro User Manual
3/48
Storage:
Disk: 1TB at 3400MB/S
Connections
Audio Options
Please refer to theAudio Optionsarticle for the MKPro.
Identification
The identification plate is located on the rear panel of the MKPro. It contains useful information
for technical support operations.
Total disk space is shared between factory system and content, and user content.

12/1/21, 2:03 PM
MKPro User Manual
4/48
1. Batch number
2. Serial number
3. Year of production
INSTALLATION
Content of Package
1 MKPro
Ceiling mount bracket
Set of Protective fillers
Power cord
Remote
AA Batteries
1 Flightcase
Read the complete instructions before you start installation and assembly.
Do not begin the installation until you have read and understood the instructions and
warnings contained in this part of the user manual. If you have any questions regarding
any of the instructions or warnings, please contact us.

12/1/21, 2:03 PM
MKPro User Manual
5/48
Setup
Unpacking
   1. Open the butterfly locks located on both sides of the flight case.
Ensure that you have received all parts according to the package content list. If any parts are
missing or faulty, contact us.
Always use an assistant to proceed with the unpacking
There is an indication at the bottom of the flight case that will help you determine where
the FRONT of the MK Pro is located.

12/1/21, 2:03 PM
MKPro User Manual
6/48
   2.Use the handles on both sides to remove the top and place it on the floor.

12/1/21, 2:03 PM
MKPro User Manual
7/48
   3. Ideally, place the top of the flight case right behind or in front of the flight case, as you will
have to put the MK Pro on top of it in the next step.

12/1/21, 2:03 PM
MKPro User Manual
8/48
   4.There are slots on both sides of the protection filler surrounding the MK Pro. These slots
will allow you and the person helping you to insert your hands to grab the MK Pro.

12/1/21, 2:03 PM
MKPro User Manual
9/48
   5.Carefully take the MK Pro out of the flight case and place it over the top of the flight case.

12/1/21, 2:03 PM
MKPro User Manual
10/48
   6. Remove the 1st layer of protection filler from the flight case, and take out the ceiling
support, power cord, remote controller and AA batteries from the protection filler below.

12/1/21, 2:03 PM
MKPro User Manual
11/48
Ideally, after taking out all the items inside the flight case, you will have to put the
protection filler back in its place, as you will close the flight case in the next step.

12/1/21, 2:03 PM
MKPro User Manual
12/48
   7. Put the top of the flight case with the MK Pro back on the flight case.

12/1/21, 2:03 PM
MKPro User Manual
13/48
Installing the ceiling mount bracket
Your MK Pro is on wheels now! This will make it easier for you to move the MK Pro
wherever you need it during the next two steps of the setup process.
Do not begin the installation until you have read and understood the instructions and
warnings contained in this part of the user manual. If you have any questions regarding
any of the instructions or warnings, please contact us
Never exceed the maximum listed weight capacity. Serious injury or property damage may occur.
This mounting bracket was designed to be installed and utilized ONLY as specified in this
manual. Improper installation of this product may cause damage or serious injury.

12/1/21, 2:03 PM
MKPro User Manual
14/48
Ceiling mount bracket specifications
Material
Weight:
Lenght
Rotation angle:
Tilt angle:
Maxium weight capacity
Component checklist
Ceiling plate (x1)
Column (x1)
DIN 912 M6x45 Screw (x1)
Power & Configuration (x1)
M6 Nut (x1)
Mounting on solid brick and concrete mounting
This ceiling mount bracket should only be installed by someone of good mechanical
ability, with basic building experience and a full understanding of these instructions.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
Make sure that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components.
Tighten screws firmly but do not over-tighten. Over-tightening can damage the items,
greatly reducing their holding powe
If mounting to a wood joist ceiling, make sure that the mounting screws are anchored into
the centre of the joists. The use of a stud finder is highly recommended.
Ensure that you have received all parts according to the component checklist. If any parts
are missing or faulty, contact us.

12/1/21, 2:03 PM
MKPro User Manual
15/48
1. Find and mark the exact location of the mounting holes.
When installing ceiling mounts on cinder blocks, verify that the actual concrete thickness
is at least 35 mm for using the concrete anchors. Do not drill into mortar joints! Be sure
to mount in a solid part of the block, generally 25 mm minimum from the side of the
block.
It is recommended to use an electric drill on slow setting to drill the hole instead of a
hammer drill to avoid breaking out the back of the hole when entering a void or cavity.
The installer must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
The marks for the holes must be made in the middle of the slots
The arrow in the ceiling plate must point to the projection surface.

12/1/21, 2:03 PM
MKPro User Manual
16/48
2. Drill four holes and insert the wall plugs.

12/1/21, 2:03 PM
MKPro User Manual
17/48

12/1/21, 2:03 PM
MKPro User Manual
18/48
   3. Hang the ceiling plate so that the screws fit through the screw holes in the plate.
   4. Pre-adjust the ceiling plate into place and tighten the screws
Make sure the arrow in the ceiling plate is facing the projection surface.

12/1/21, 2:03 PM
MKPro User Manual
19/48
5. Install the column and secure it using the screw and nut.
The screws have to be tightened almost all the way, allowing the ceiling plate to slide into
its slots for small adjustments of the panoramic orientation later.

12/1/21, 2:03 PM
MKPro User Manual
20/48