Cables to Go 30580 User manual

Instruction Manual
Internet Phone Commander
The Internet Phone Commander by Cables To Go is a new item for PCs and Notebooks
using USB technology. You can use your regular telephone as both an IP and regular phone by
connecting to your home phone line at the same time. It can save you money in telephone
costs and you use it just like a normal phone!!!
Features
•While the device is connected to a normal telephone, you can call either an IP phone or a
normal telephone.
•Transferring phone call functionality enables you to transfer calls from VoIP to your normal
phone or cell phone through your home phone line
•Supports Skype, GoogleTalk, MSN Messenger, Yahoo! Messenger, AOL VoIP, along with
many other VoIP services (*Some functions of the Internet Phone Commander are not
available for some services)
•No external power supply needed
•Support both normal phone and cordless phone
•Noise cancellation function using DSP technology
•The key-presses on the telephone can be simulated as the keyboards and mouse by
software, in order to finalize the control of software for IP phone users
•No need to use the keyboard or mouse while dialing on the IP phone
•Voice reminder for wrong dialing
•Simply hang up the phone to end the conversation
•Easy to use
Hardware connection
•Using a telephone cable, one end is connected to the Line port; another is connected to a
residential telephone line.
- If the user doesn’t need the function of a residential phone line, please go directly to
Step 2
•Using a telephone cable, one end is connected to the Phone port, the other end is connected
to the normal telephone
•Plug the USB port into the PC
Software installation
•The Power light will be on if the adapter is correctly connected.
•Insert the CD driver included, double click Setup install the drivers
•Click finish
How to use
•Make sure your PC and Internet is on.
•Make sure you’ve downloaded a VoIP service, if not please download

•Click “Start”, Choose Internet Phone Commander, start using the Internet Phone Commander
software
•Internet Phone Commander and Skype are bound together, so Skype will be started up as
well
•Input the Skype account and password, there will be two icons shown which means the
program is running correctly.
•The first time using the Skype + Internet Phone Commander, you need to set the shortcuts
for the Skype contacts, if you have already set this up, please go directly to the next step.
*How to set shortcuts:
Right click the Skype contacts, choose “Assign Speed Dial”, and then input the numbers you
want to set as a shortcut (Skype supports 00-99 shortcuts)
•The OUT LED will be on when you start dialing the numbers.
How to dial the Skype contacts: Press “* “+ the shortcut of the contacts + “#”.
Just dial the phone number for normal telephone numbers.
•For an incoming call, the phone will ring, just pick up the phone or press the answer button.
The IN LED will be on during an incoming call.
•Hang up to end the conversation or press the end button.
•If the number you dialed is not in use, there will be a sound to notify you.
•If you are not beside the computer, the incoming Skype calls can be transferred to your
normal telephone or mobile phone through the software or SkypeOut. Right click the
Internet Phone Commander Icon on the right bottom corner, choose “INPUT - TRANSFER－
PSTN NUMBER”, input the numbers that you want to transfer to, click “OK”, then double click
the icon in the right bottom corner, choose “√” for “CALL TRANSFER－PSTN”
•If there is no RX or transmission audio on the Internet Phone Commander, please set the
Audio properties to:
Skype – Edit – Option – Input/Output facility, choose the USB Audio Device
Remarks
•Do not pull out the device too often; waiting 30 seconds after the device is shutdown is
suggested.
•Do not exit the device software freely; otherwise the telephone cannot be used to call IP
phones.
•Do not expose the device to extreme hot or cold temperatures.

Technical Specifications
•One USB port
•Two RJ11 ports
•LED: 3 (POWER, IN, OUT)
•Size: 138MM*45MM*25MM
•Working temperature: 0- 60 centigrade
•Working voltage: 5V
•power: 0.5W (sleeping),2W (working)
•Running system: compatible with Windows9x／Me／2000／XP／NT
•PC hardware requirement: above 300MHz processor, USB port,10MB hard disk space,
network connection (Dial, Broadband, Wireless etc)