COMMERCIAL LIGHTING Sovereign S18322 User manual
16-17 Chandlers Way
Swanwick
Southampton
SO31 1FQ
T +44 (0)1489 581002
F +44 (0)1489 576262
W www.commercial-lighting.co.uk
twitter
facebook
youtube
INSTALLATION GUIDE
RANGE NAME SOVEREIGN SLM PROJECTOR
PRODUCT TYPE INTERIOR TRACK/ CEILING PROJECTOR
PRODUCT RANGE CODE S18322
Our products are subject to the Directive
2012/19/EU (Waste Electrical and Electronic
Equipment - WEEE) and should always be
disposed of separately at the end of their
lifespan.
Suitable for mounting on normally combustible
surfaces.
The light source contained in this luminaire
should only be replaced by the manufacturer or
a similar qualied person.
This product is Class 1 in electrical safety,
meaning it is electrically insulated and provided
with a connection to earth.
Do not connect to a temporary electricity
supply. This may damage the electronics.
This product complies with all CE related
European directives, including the Low Voltage
Directive (2014/35/EU) and the EMC Directive
(89/336/EEC).
TRACK MOUNTING
1) Insert the track adapter into the track (the track guide will
only allow insertion with correct orientation).
2) Move the securing levers to secure the track.
3) Select the desired circuit (1-3) with the selector.
4) Rotate spotlight to desired angle.
Track guide
Euro Track Adapter
S18322
Securing levers
16-17 Chandlers Way
Swanwick
Southampton
SO31 1FQ
T +44 (0)1489 581002
F +44 (0)1489 576262
W www.commercial-lighting.co.uk
twitter
facebook
youtube
INSTALLATION GUIDE
1
3
4
2
4
Remove the screws from the side of the ceiling plate and lift out
the mounting tray.
Connect the mains cable to the terminal block
Rotate spotlight to desired angle.
Mark and x the mounting tray to the ceiling.
Place the tting over the tray and replace the screws to secure
to ceiling.
Mains Cable entry
to spotlight
to mains
CEILING PLATE MOUNTING
