Cool-Icam CIC-310 User manual

User’s Manual
eMovie2
TM
F
3
.
5
f
=
9
.
0
m
m

2
Product Overview
1. Capture/Playback selector
2. Shutter button
3. Hand Strap holder
4. Lens Cap
1
4
2
3
1. Lens
2. Status LED
3. Microphone
F
3
.
5
f
=
9
.
0
m
m
1
3
2
1. Power On/Off button
2. OK button
3. Left button
4. Down/Zoom out button
5. Right button
6. Up/Zoom in button
7. Mode button
8. Display On/Off button
9. Video output terminal & USB port cover
10. LCD Screen
1
6
7
3
8
2
5
4
9
10
1. Tripod mount
2. SD card slot
3. Battery door
TBA
1
2
3

3
Table of Contents
1 Getting Started....................................................................................................................... 4
• What can I do with my Camera?............................................................................................ 4
• What can I do with my Digital Pictures?.................................................................................. 4
• What can I do with my Audio and Video clips ? ........................................................................ 4
• Camera Package Contents .................................................................................................... 4
• Installing the Batteries ......................................................................................................... 4
• Turning the Camera On and Off ............................................................................................ 5
• Checking the Battery Level ................................................................................................... 5
2 Camera Setting ...................................................................................................................... 5
• Checking Camera Status ...................................................................................................... 5
• Camera Modes .................................................................................................................... 5
• Turning the Information Display and the LCD Screen On/Off...................................................... 6
• Setting Auto Power off ......................................................................................................... 6
• Setting Date and Time ......................................................................................................... 6
• Setting Display Language ..................................................................................................... 6
• Flash Strobe Operation Insruction.......................................................................................... 7
3 Taking Pictures ....................................................................................................................... 7
• Taking a Picture................................................................................................................... 7
• Setting Exposure Compensation ............................................................................................ 7
• Setting the White Balance .................................................................................................... 8
• Setting Sharpness ............................................................................................................... 8
• Setting Image Size .............................................................................................................. 8
• Setting Self-timer................................................................................................................ 9
• 3X Digital Zoom Function...................................................................................................... 9
• Setting the Date Stamp........................................................................................................ 9
• Setting Frequency ............................................................................................................... 9
4 Recording Video clips and Audio clips......................................................................................... 9
• Recording Video clips ........................................................................................................... 9
• Recording Audio clips ......................................................................................................... 10
5 Managing Pictures, Video and Audio clips ................................................................................. 10
• Reviewing Pictures on the LCD Screen.................................................................................. 10
• Rotating the Displayed Picture............................................................................................. 10
• Playback Video and Audio clip on the LCD Screen................................................................... 10
• Protect or Unprotect Picture, Video or Audio clip .................................................................... 10
• Deleting One Picture, Video or Audio clip .............................................................................. 10
• Deleting All Pictures, Video/Audio clips ................................................................................. 11
• Setting TV-out .................................................................................................................. 11
6 Using the SD Card................................................................................................................. 12
• Using the SD (Secure Digital) Card ...................................................................................... 12
• Formatting the SD Card...................................................................................................... 12
7 Installing the Software onto a Computer .................................................................................. 13
• Installing the Software ...................................................................................................... 13
• Software Included with Your Camera.................................................................................... 13
• Computer System Requirements.......................................................................................... 14
8 Transferring Pictures/Video and Audio clips To Your Computer ..................................................... 15
• Before Transferring Pictures ............................................................................................... 15
• Connecting to Your Computer ............................................................................................. 15
• Transferring the Pictures, Audio clips and Video clips to PC ..................................................... 15
• Transferring the Pictures, Audio clips and Video clips to MAC .................................................. 15
9 Using the Camera as a Web Cam (PC only)............................................................................... 16
• Setting up NetMeetingTM ..................................................................................................... 16
• Start NetMeetingTM ............................................................................................................ 16
• Capturing Live Video clips Using Video Impression 1.6 (PC only) .............................................. 17
10 Troubleshooting Problems ..................................................................................................... 18
• Troubleshooting................................................................................................................. 18
11 Getting Help........................................................................................................................ 19
• Customer Support ............................................................................................................. 19
• ArcSoft Software Help ........................................................................................................ 19
12 Appendix ............................................................................................................................ 20
• Technical Specifications ...................................................................................................... 20
• Uninstall Digital Camera Driver (PC)..................................................................................... 20
• Using Your Batteries .......................................................................................................... 21
• Tips, Your Safety & Maintenance.......................................................................................... 21
• Regulatory Information ...................................................................................................... 21

4
1 Getting Started
• What can I do with my Camera?
Capture Enjoy point & shoot operation. Store pictures and video clips on the internal
memory or a SD Card.
Set Up Select various camera settings.
Communicate Use the camera as a web camera. (PC only)
• What can I do with my Digital Pictures?
View View pictures on a computer using PhotoImpression or a TV.
Save Save pictures to the computer memory by Mass Storage interface.
Communicate Send pictures over the Internet to family and friends.
• What can I do with my Audio and Video clips?
Playback Playback audio and video clips on a computer using the Windows Media Player
or a TV.
Save Save audio and video clips to the computer memory by Mass Storage
interface.
Communicate Send the audio and video clips over the Internet to family and friends.
• Camera Package Contents
eMovie2
Quick Start Guide
Product Overview
1. Lens
2. Microphone
3. Power LED
4. Viewfinder(open position)
5. LCD Display
6. mode button
7. Delete button
8. Flash button
1. Viewfinder(closed position)
2. USB & SmartMedia™ Card Door
3. Battery Door
4. Shutter button
5. SmartMedia™ Card Release button
6. Hand Strap
2
1
34
F
3
.
0
f
=
5
.
6
m
m
C
O
O
L
-
I
C
A
M
1
.
3
M
E
G
A
P
I
X
E
L
C
A
M
E
R
A
5
6
MONITOR
1
2
3
4
5
6
7
8
9
TM eMovie2
Quick Guide
2 x AAA Alkaline
Batteries
2 x AA Alkaline
Batteries
Flash Strobe
(Optional)
Please take a moment to fill out and return this Registration Card.
Your valuable input will help us to serve you better.
Product Registration Card
3
First Name
Mr.
Middle Initial
Last Name
Address
Ms.Mrs.Miss
Please provide any comments you have regarding this product.
Registration Card No.:
T
own County
Post CodeT
elephone No.
E-mail AddressDate of purchase
DayMonthYear
5
Age of user
5-78-1010-1516-2021+
7
Retail ShopCatalogueOthers: (Please specify)
MagazineCatalogue BrochureInternetFriends
Where did you purchase this product?
Where did you first see this product?
Others: (Please specify)
Internet
TV
Please check here if y
ou are not interested in receiving information from
Character Options Ltd. about current and future products.
Character Options Ltd.
Customer Services Department.
Helpline T
el: 0161 633 9808
E-mail: [e-mail]
TM
Registration Card
Tripod Pouch
AV Cable
Hand Strap
USB Cable
The CD-ROM includes
Digital Cam Driver ( PC)
Microsoft® NetMeeting™(PC)
ArcSoft VideoImpression 1.6 (PC & Mac)
Adobe® Acrobat® Reader(PC & Mac).
User’s manual in PDF format
Lens Cap with
Strap
• Installing the Batteries
2 X AA Alkaline batteries are supplied with the product. For more guideline on battery usage, please see
Using your batteries.
1. Open the battery door at the bottom of the eMovie2, follow the arrow direction.
2. Insert 2 x AA batteries (included) follow the polarity, showed in the battery compartment.
3. Close the battery door.
TBA TBA
TBA

5
• Turning the Camera On and Off
Pull left to open the LCD screen panel. Fully press the Power On/Off
button until the LCD screen is on. Press the Power On/Off button
again to turn off the camera.
Power On/Off button
• Checking the Battery Level
Check the battery power level before taking pictures.
1. Open the LCD panel.
2. Turn on the camera.
3. Check the battery status level that appears on the LCD screen.
Batteries have adequate power.
Running out of battery. Batteries need to be replaced.
2 Camera Setting
• Checking Camera Status
Open the LCD panel. Turn on the camera, view the camera LCD screen to check which camera settings are
active. If the feature icon is not displayed, it means that particular feature is not activated.
Capture Mode Playback Mode
F
ON
Image Resolution Camera Status
Battery Status
Other Features
1600 x 1200
1280 x 960
640 x 480
Pictures can be taken
Still Picture Mode
The length of video clip
SD Card inserted
Self-timer On
Video Mode
Audio Mode
Auto Exposure
Compensation
Auto White Balance
Folder
Number of
picture displayed
Full Low
00:00
F
ON Locked le
• Camera Modes
The camera has two working modes: Palyback mode, Capture mode. You can switch between these two
modes by pushing the Capture/Playback selector upwards or downwards. There are three modes udner the
Capture mode: Still image mode, Audio mode and Video mode. When you have selected the Capture mode,
press the OK button to toggle through Still image mode, Audio mode and Video mode. The default setting
is Video mode.

6
• Turning the Information Display and the LCD Screen On/Off
In all the modes, press the Display on/off button once to turn off the information display on the LCD screen,
press it again will turn off the LCD screen. Press the Display on/off button once more will turn on the
information display and the LCD screen.
Press
Press Press
• Setting Auto Power off
This camera is designed to automatically power off to save battery life in 30/60/90 seconds of inactivity.
Press the Power button if you want to turn on the camera again. You can change the power saving setting
by the following steps:
Open the LCD panel, then turn on the camera and set it to Still image mode.
Press
OK
Press Press
OK
You can also change the power saving setting under Playback mode.
• Setting Date and Time
Open the LCD panel, then turn on the camera and set it to Still image mode.
Press
OK
Press Press
OK
Press
OK
Press OK
• Setting Display Language
Under this setting, you can select the language you prefer for the LCD screen.
Open the LCD panel, then turn on the camera and set it to Still image mode.
Press
OK
Press Press
OK

7
• Flash Strobe Operation Instruction
NOTE:
• The Flash strobe will only be enabled in still image capture mode.
• The Flash strobe is designed to be turned on and off manually.
Installing the Batteries
1. To open the battery door, push it towards the arrow direction.
2. Insert 2 X AAA batteries (included) as shown, ensuring you
follow the +/- polarity correctly.
3. Close the battery door by pushing it back to position.
2
1
LEDPower button
Wheel
Plug the Flash Strobe onto the Camera
1. Plug the Flash strobe onto your camera as shown.
2. Screw the wheel clockwise to lock the Flash strobe to
the camera.
3. Turn on the Flash strobe by sliding the Power button
upwards. The Flash strobe will start charging.
4. The Flash strobe will be ready when the LED turns to
green.
5. The A icon of the camera will show on the LCD screen.
NOTE:
The A icon will only appear when the Flash is fully charged and the LED
turnS to green.
3 Taking Pictures
• Taking a Picture
Shutter button
1. Open the LCD panel, and turn on the camera.
2. Set the Capture/Playback selector to Capture mode.
3. Frame your subject using the LCD screen.
4. Press the Shutter button completely down to take a picture, holding the
camera steady. A beeps will sound when the picture has been taken.
• Setting Exposure Compensation
You can adjust the exposure compensation value (EV) within the range of -1.5EV to +1.5EV in order to
compensate for current lighting conditions. This setting can be used to obtain better result when shooting with
backlighting, indirect indoor lighting, a dark background, etc.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press
Press
OK
Press OK
NOTE:
• A higher EV value is best for light-coloured subjects and backlight subjects. A lower EV value is best for dark-coloured subjects and for shooting
outdoors on a clear day.
• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure
compensation.
• Exposure compensation returns to its standard default setting (AUTO) after you turn off the camera.

8
• Setting the White Balance
Selecting the right type of white balance can help to make the colour of a subject appear more natural
under the type of lighting that is available.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
Press OK
• Setting Sharpness
Use the Sharpness setting to highlight or to soften the edges of the subject.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
Press OK
Normal Use when no special effect is needed. Ideal for everyday pictures.
Sharp Increases contrast on the edges of the picture. Ideal when you want to improve the clarity of a
picture, or if you later may want to crop or cut out specific areas in the picture.
Soft Softens the edges of the picture, creating a “soft focus” effect.
• Setting Image Size
Picture quality depends on both its resolution and the JPEG file compression that the camera applies when
the picture is taken. Higher resolution and less compression make better quality which occupies more
memory space. Smaller size pictures with normal quality are easier to email while larger size with fine
quality are better for printing.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera. Use the
Image size setting to select a picture resolution.
Press
OK
Press Press
OK
Here are the approximate numbers of pictures you can expect the camera to hold at each setting based on
the 8MB internal memory.
High : 1600X1200; approximately 20 pictures
Middle : 1280X960; approximately 30 pictures
Low : 640X480; approximately 98 pictures
Note
Scene complexity affects a picture’s le size. For example, the le size of a picture with trees in autumn is larger than that of the blue sky at
the same resolution and quality setting. Therefore, the number of pictures you can store in the SD card may vary. The number of pictures on the
LCD screen is for reference only.

9
• Setting Self-timer
Your camera is designed with a self-timer function, which allows you to take pictures with a 10-second
built-in timer.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
The Self-timer function is only applied to next picture. When the self-timer is activated, the camera beeps
and the self-timer LED blinks slowly for 6 seconds, then quickly for 4 seconds before the picture is taken.
Please place the camera on a flat surface or use a tripod.
• 3X Digital Zoom Function
Your camera is designed with 3X digital Zoom. This feature lets
you zoom in on the central area of a photo and photograph only
the enlarged portion of the picture. The Digital Zoom setting will
remain after a picture is taken. Please press the Zoom in and
Zoom out button to select the zoom scale you prefer for the next
picture.
NOTE:
Digital zoom function is not available in Video and Audio modes.
Zoom in
Zoom out
• Setting the Date Stamp
Use the Date Stamp setting to imprint the date on your pictures. Make sure the camera clock is set to the
correct date before setting the Date Stamp.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
When the date stamp is selected, the pictures taken will have the current date stamped on the bottom right
corner while view them on a computer or print them out.
• Setting Frequency
In order to take a better indoor picture, the camera needs to be set to suit the correct lighting frequency.
Set the frequency to 60Hz for US, 50Hz for Europe.
Set the Capture/Playback selector to Capture mode. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
4 Recording Video clips and Audio clips
• Recording Video Clip
Use the Video mode to record video clips. You can record video clips with audio feature. When in the Video
mode, the resolution is automatically set to 320 x 240pixels. The recording time available on the LCD screen
will increase while recording. Please note that Digital zoom function is disabled in Video mode.
1. Open the LCD Panel.
2. Set the Capture/Playback selector to Capture mode and then press the OK
button until the icon shows on the LCD screen.
3. Frame your subject using the LCD screen.
4. Press the Shutter button completely down to start recording.
5. Press the Shutter button again to stop recording, or recording stops when the
current memory is full.

10
• Recording Audio clips
1. Open the LCD panel, then turn on the camera.
2. Set the Capture/Playback selector to Capture mode and then press the OK button until the icon
shows on the LCD screen.
3. Press the Shutter button completely down to start recording.
The recorded time, the word “RECORDING“ and a big picture of speaker appear on
the LCD while recording.
4. The recording time on the LCD will increase while recording. Press the Shutter
button again to stop recording, or recording stops when the current memory is full.
5 Managing Pictures, Video and Audio Clips
• Reviewing Pictures on the LCD Screen
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
3. Use the Left/Right buttons to view the pictures taken.
• Rotating the displayed picture
This function enable you to rotate the picture you have taken to a better angle you need.
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
3. Follow the steps below to rotate a picture.
Press
OK
Press Press
OK
• Playback Video and Audio clip on the LCD Screen
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
3. Use the Left/Right buttons to select a video or audio clip you want to playback.
4. The LCD screen shows “PLAY AVI? YES NO” when a video clip is selected, or “PLAY WAV? YES NO” when
an audio clip is selected
5. Press the OK button to play the video or audio clip. Or use the Right buttons to select “NO” and then
continue to select other picutres, Video or Audio clips.
• Protect or Unprotect Picture, Video or Audio clip
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
3. Use the Left/Right buttons to select the picture, video or audio clip you want to protect/unprotect.
Press
OK
Press
Press
OK
ON
• Deleting One Picture, Video or Audio Clip
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
3. Use the Left/Right buttons to select the picture, video or audio clip you want to delete.
Press
OK
Press Press
OK

11
• Deleting All Pictures, Video/Audio Clips
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
• Setting TV-out
Setting the Video Output System
The video output signal can be switched (NTSC or PAL) to accommodate different signal systems. For
example: NTSC for USA, Canada, Taiwan, Japan, etc. and PAL for Europe, Asia (excluding Taiwan), etc.
You can change the video output system according to the following steps:
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
Press
OK
Press Press
OK
NOTE:
When “NTSC” or “PAL” is selected, the LCD screen turns black. When “LCD” is selected, the LCD screen will return to Playback mode.
Connecting to a TV
When the camera is connected to a TV and “NTSC” or “PAL” is selected, the LCD screen is not active and
the TV screen now performs as the camera LCD screen.
1. Connect the camera to a TV via the TV-out cable (supplied) as illustrated.
2. Set the TV to “Video” mode.
3. When the camera is set to Capture mode, you can preview
the subjects you want to record on the TV screen.
4. When the camera is set to Playback mode, you can review all
the pictures, video and audio clips stored in the SD card on
the TV.

6 Using the SD Card
• Using the SD (Secure Digital) Card
Your camera comes with approximately 8MB of built-in flash memory for storing pictures, video and audio
clips. You can expand the memory using a commercially available SD card (up to 256MB). The camera
senses whether a memory card is inserted, and automatically saves pictures accordingly. Note that you
cannot save pictures to the built-in flash memory while a memory card is installed in the camera.
IMPORTANT!
• Make sure you turn off the camera before inserting or removing a memory card.
• Be sure to orient the card correctly when inserting it. Never try to force a memory card into the slot when you feel resistance.
• SD memory cards have a write protect switch that you can use to protect les from accidental deletion. However, you must remove the write
protection whenever you want to record to it, format it, or delete its les.
• Files contained in the SD card recorded by other cameras may conict with the eMovie2 camera, and valuable data in your
existing SD card may be distorted or lost when the card is inserted in the eMovie2 camera. We strongly recommend the user to
use a NEW or formatted SD card for the eMovie2 camera. We will not guarantee any valuable data or les (other than eMovie2
camera’s) in your SD card.
Inserting the SD (Secure Digital) Card
Turn off the camera and open the SD card slot cover as illustrated. Insert the SD Card, ensure the card is
inserted the correct position as illustrated, close the card door before using the camera.
TBA
TBA
TBA
Removing the SD (Secure Digital) Card
To remove the SD card, turn off camera , open the SDcard slot cover, gently use your finger to push the SD
card inwards and then release it for the SD card to bounce out of the SD card slot as illustrated.
TBA TBA
TBA
IMPORTANT!
• Never insert any other object into the camera’s SD card slot. Doing so creates the risk of damaging to the camera and card.
• Should water or any foreign objects ever get into the card slot, immediately turn off the camera, remove the batteries and contact your dealer
or nearest service provider.
• Never remove a card from the camera while the camera is powered on. Doing so can cause the picture record operation to fail, and even
damage the memory card.
• Formatting the SD Card
Formatting the SD card erases all pictures, video and audio clips, including the protected files. Removing
the SD card during formatting may damage the card.
1. Set the Capture/Playback selector to Playback mode.
2. Open the LCD panel, then turn on the camera.
Press
OK
Press
Press
OK
IMPORTANT!
• You can format a memory card on the camera or on a computer. However formatting a memory card on a computer takes much longer time.
• Note that data deleted by a format operation can not be recovered. Make sure you do not need any data currently stored on a memory card before
you format it.

13
7 Installing the Software onto a Computer
• Installing the Software
For Windows® Users: PC
IMPORTANT!
MAKE SURE YOU INSTALL ALL THE SOFTWARE FROM THE CD SUPPLIED BEFORE YOU CONNECT YOUR CAMERA TO A COMPUTER AND TRANSFER
PICTURES FROM YOUR CAMERA TO THE COMPUTER.
IMPORTANT! (For Windows® 98SE)
On Windows® 98SE Mass Storage function needs to install the eMovie2 Driver. After the installation, please restart the Windows before connecting the
camera to the PC.
IMPORTANT!
To experience higher performance in graphics and sound when you’re watching video clips on your PC, it is recommended to install the DirectX ver. 8.0
or above. It can be downloaded from http://www.microsoft.com/directx
IMPORTANT! (For Windows® ME, 2000, XP)
Directly plug-in the camera to transfer and play the pictures, video clips or audio clips. No need to install the driver. But if you want to use NetMeeting™
function, please install the driver rst.
IMPORTANT! – If the computer requests you to install the Windows® system disk during the software installation, place the Windows® CD into
the computer CD-ROM drive or insert the eMovie2 driver CD to the CD-Rom drive. If eMovie2 driver CD is inserted, please set the path to “CD-Rom
drive \software\Driver\Sysle”. The computer will install the necessary les from the CD automatically. When the Windows® software appears to have
nished the operation, close the Windows® screen. Remove the Windows® CD and store safely.
NOTE:
Microsoft® NetMeeting™ is already bundled with Windows® 2000 and XP OS. Users using Windows®
2000 or XP do not need to install this software from the CD-Rom.
Open & Close
1. Before you begin, close all other software applications open on your
computer.
2. Insert the CD supplied into the computer CD-ROM Drive.
3. The CD User Interface Screen will automatically launch.
4. With the mouse, click on each software interface button in turn and follow
the on screen instructions.
NOTE:
If the setup screen doesn’t appear after loading the CD, then you can manually start it by double-clicking the
“My Computer” Icon on your desktop, then double-clicking the icon for the CD-ROM drive. When the CD-ROM
window opens, double-click the le “INSTALL-E.EXE” .
For Macintosh® Users: MAC
1. Before you begin, close all other software applications opened on your computer.
2. Insert the CD supplied into the computer CD-ROM Drive.
3. Double click the CD-ROM icon “Digital Video”.
4. Install the software included.
• Software Included with Your Camera
The eMovie2 software CD contains the following software:
Digital Cam Driver
Easy to use, just plug the camera to a computer and use it as a removable disk. Use the Arcsoft
VideoImpression 1.6 software to create and edit new videos using existing video and images files – making
desktop video presentations for home, business, and the web.
ArcSoft VideoImpression™ 1.6 Movie Making Software
ArcSoft VideoImpression™ is an easy-to-use video and image editing software program. The program
enables users to create and edit new videos using existing video and image files - making desktop video
presentations for home, business, and the Web.
Microsoft® NetMeeting™ Web Cam software
NetMeeting™ provides the most complete conferencing solution for the Internet and corporate intranet.
Powerful features let you communicate with both audio and video, collaborate on virtually any Windows-
based application, exchange graphics on an electronic whiteboard, transfer files, use the text-based chat
program, and much more. Using your PC and the Internet, you can now hold face-to-face conversations
with friends and family around the world.
Adobe® Acrobat® Reader .PDF File Reading Software
Adobe® Acrobat® Reader lets you view and print Adobe Portable Document format (PDF) files on all major
computer platforms, as well as fill in and submit Adobe PDF forms online.

14
• Computer System Requirements
For acceptable picture transfer and editing, we recommend the following minimum requirements:
For Windows® Users PC
• Compatible with Microsoft® Windows® 98SE, Me, 2000 or XP
• Pentium® II 333MHz or equivalent processor
• USB Port
• 64MB RAM (128MB recommended)
• 200MB free disk space
• Colour monitor with high colour (16-bit) graphic capability or higher
• CD-ROM drive
• Standard mouse and keyboard
• Stereo speakers
• DirectX 8.0 or higher
For Macintosh® Users MAC
• Mac® OS Version 9.2~X
• iMac / PowerMac G3 300MHz or higher
• USB Port
• 64MB RAM (128MB recommended)
• 150MB Free disk space
• Colour monitor with high colour (16-bit) graphic capability or higher
• CD-ROM drive
• Standard mouse and keyboard
• Stereo speakers

15
8 Transferring Pictures/Video and Audio Clips To Your Computer
• Before Transferring Pictures
IMPORTANT! - FOR PC USERS
BEFORE YOU CONNECT YOUR DIGITAL CAMERA TO THE COMPUTER, MAKE SURE THAT YOU HAVE INSTALLED THE SOFTWARE FROM
THE ENCLOSED CD. PLEASE REFER TO “7 Installing the Software onto a Computer”.
For Windows® and Macintosh® Users: PC
MAC
• Connecting to Your Computer
Connecting with the USB Cable.
USB Series “Mini B” Plug Connects
to your camera
USB Series “A” Plug Connects to
your Computer
OK
VIDEO
OUT
USB
1. Open the LCD panel, then turn on the camera.
2. Plug USB cable “A” plug into the socket marked on your computer.
3. Plug the other end of the USB cable into the USB port on your camera.
For Windows® Users: PC
• Transferring the Pictures, Audio clips and Video clips to PC
1. Open the LCD panel, then turn on the camera.
2. Set the camera to Playback mode.
3. Connect the camera to a computer via the USB cable.
4. Double click on “My Computer” icon on your desktop and then you can see a “Removable Disk” drive.
5. Double click “Removable Disk” -> double click “DCIM”-> double click “100MEDIA”.
6. All the pictures, video clips and audio clips are in the “100MEDIA” folder. Highlight the pictures, video
clips or audio clips and drag them to a folder of your choice. You can also create sub-folders to group
them or use the Arcsoft software to edit and manage the pictures.
For Macintosh® Users: MAC
• Transferring the Pictures, Audio clips and Video clips to Mac
NOTE:
For MAC user, directly plug-in the camera, no need to install the driver.
1. Open the LCD panel, then turn on the camera.
2. Set the camera to Playback mode.
3. Connect the camera with MAC via the USB cable, the systems will automatically recognize a MASS
STORAGE drive named “untitled”.
NOTE:
This Drive name will vary on different versions of MAC OS systems.
4. Double click the folder “untitled” to enter.
5. Double click the folder “DCIM” and then the folder “100MEDIA”.
6. You can copy the pictures, audio clips and video clips from this folder “100MEDIA” and paste them to the
hard disk.

16
9 Using the Camera as a Web Cam (PC only)
IMPORTANT!
Before using the Web Cam function, make sure that your camera had been switched to PC Camera mode by pushing the Capture/
Playback selector to Capture mode. PC camera mode is not supported by Apple Macintosh.
• Setting up NetMeeting™
NOTE:
Set the camera to Capture mode before starting NetMeeting™.
1. Connect your eMovie2 to the USB cable on one end.
2. Connect the USB cable to a USB port on your PC on the other end.
3. Set the Mode button to the Capture mode.
4. When it is the first time to use the camera as a “Web Cam”. The Windows may prompt the user to insert
the Windows system disk. Please insert the eMovie2 driver CD or the Windows CD into the CD-ROM drive
to install the requested files.
5. Put your eMovie2 on top of your PC monitor or another flat surface.
6. Connect your Speaker to your audio card’s Speaker out jack.
• Start NetMeeting™
NOTE:
For Windows® XP / 2000 users who use NetMeeting™ for the rst time, Go to Start -> Run ->type in “conf” ->click “OK” and then follow the
on-screen set up instruction to set up NetMeeting™.
1. Double click the “NetMeeting” icon on the desktop or select the “NetMeeting” icon from the Windows®
Start Menu.
2. If you need further help on how to use Microsoft® NetMeeting™, select the “Help” under the menu bar
and choose the topic you need. You can also refer to the eMovie2 “EASY TO USE GUIDE TO MICROSOFT®
NETMEETING™” or visit the website: http://www.microsoft.com/windows/netmeeting.
F
3
.
5
f
=
9
.
0
m
m

17
• Capturing Live Video Clip Using VideoImpression 1.6 (PC only) PC
IMPORTANT!
NetMeeting function or ArcSoft VideoImpression (live video) needs to install the Digital Cam Driver.
1. Turn on the camera
2. Change to Capture mode if your camera is in Playback mode .
3. Please change to PC CAM mode, by following “setting PC CAM for PC”.
4. Run the “VideoImpression 1.6” and Click “New” to start.
5. Click “Capture” to enter Capture Video mode.
6. User can get a “live” view from the screen.
Click this button to get a live view!
7. Make sure that “WWL 401 Video Camera Device” is selected in the pull down menu.
8. Click “Record” button to start recording video.
9. Click “Pause” button to stop recording.
10. User can playback the video by clicking “Play” button.
Pause buttonRecord button
11. User can click “Save” button to save the video that already created.
12. Type the appropriate file name, path and then click “Save”.
13. Users can add the video clips into video templates by choosing “Yes”.
14. Enjoy your fun with eMovie2 camera!

18
10 Troubleshooting Problems
• Troubleshooting
The troubleshooting guide is designed to help you. If problems continue, please call your local customer
support hot-line. See your registration card for hot line contact details.
I receive an error message when I am
installing the Digital Cam Driver.
Digital Cam Driver does not load. Shut down all other applications and attempt to
reinstall the driver
Symptom Problem Solution
I cannot upload images to the PC. Connection failure. Check all cables connections are secured.
My eMovie2 camera can’t be recognized
by the system.
Conict with another camera driver or
capture device.
If you have another camera installed on your
computer, remove it and it’s driver completely from
your system to avoid conicting with the eMovie2.
I get a blurred image when uploading my
images to my computer.
There may be a momentary delay between
pressing the shutter button and the actual
exposure.
Hold your eMovie2 camera steady until you hear a
“beep” which indicates the exposure is completed.
Check the USB controller in your BIOS if they are
activated. If these do not work, contact your national
Customer Support representative.
My eMovie2 Camera LCD screen show ”
” icon.
This means there is insufcient power. You need to replace the batteries.
My eMovie2 Camera hanged and all
buttons do not work
Take out all the batteries and disconnect the camera
from the computer for 10 seconds. Re-insert the
batteries again.
Your camera may be affected by the
electrostatic discharge
I cannot upload les to the PC in Windows
98SE
On Windows 98SE, Mass Storage function
needs to install the Digital Cam Driver.
Please insert eMovie2 CD and click Digital Cam
Driver to install the driver.
My CD installation wizard does not work. The auto installation le is switched to off. Go to the computer desktop Right click on “My
Computer”. Click “Properties”. Select “Device
Manager”. Double click on “CD-Rom”, double click on
“CD-R” (Normally the manufacturer’s name). Click on
“ Setting . Ensure “Auto insert notication “ is ticked
and the “ disconnect “ is ticked. If you change the
settings the computer will ask you to restart your PC.
Click “ Yes “
There is no response in NetMeeting™ or
ArcSoft VideoImpression (live video) when
the camera is connected to the PC
Capture mode is not selected in your
eMovie2 Camera
Set the camera to Capture mode before connecting
to your PC.
NetMeeting function or ArcSoft
VideoImpression (live video) needs to
install the Digital Cam Driver.
Please insert eMovie2 CD and click Digital Cam
Driver to install the driver.
I cannot upload the images from the
internal memory of the eMovie2 camera
to PC.
The SD Card is inserted inside the SD
Card slot.
The memory card with a higher priority than the
internal memory for image storage or image transfer
or delete.
I cannot switch on my eMovie2 Camera
after inserting a SD Card .
The SD Card is not inserted properly. Make sure the SD Card is inserted all the way in and
close the slot door properly.
I press the shutter button and get no
response.
The eMovie2 Camera is processing the
image.
Wait for this process to complete and then take your
next image.
The internal memory or SD Card memory
is full.
Delete some images in the internal memory of the
camera or SD Card
You can manually start it by going to the Windows
Desktop, double click “My Computer”, double click
your CD ROM icon and nally double click “INSTALL-
E.EXE” le.
The CD ROM is disconnected.
Incorrect operation interface. Make sure your eMovie2 is in “Mass Storge”
interface.
AVI le cannot be played. DirectX version is lower than 8.0 Install DirectX 8.0 or above.Visit http://
www.microsoft.com/directx for more detail.
When connect the camera to the PC in
Capture mode, Windows prompt to insert
system disk.
eMovie2 driver installation has not
completed.
Insert the Windows CD or eMovie2 driver CD. If
eMovie2 driver CD is inserted, please set the path to
“CD-Rom drive\software\Driver\Sysle”. And continue
the installation.
P lease also refer to the help les & User Guides that accompany the enclosed applications. For further
information and support, please visit our website: http://www.cool-icam.com

19
11 Getting Help
• Customer Support
If you have any problem with this product, we want to help. For immediate assistance, please phone the
Hotline, send e-mail to the support e-mail address or write to the address shown on the warranty card
enclosed.
• ArcSoft Software Help
For North America For South & Central America
ArcSoft HQ Support Centre Tel: [phone]+5520
(Fremont California, CA) Fax: [phone]
Tel: [phone] E-mail:[email protected]
(toll free number)
Fax: [phone]
E-mail: [email protected]
For China For Japan
ArcSoft China Support Centre (Beijing) ArcSoft Japan Support Centre (Tokyo)
Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
E-mail: [email protected] Web: http://www.mds2000.co.jp/arcsoft
E-mail: [email protected] and
[email protected]
For Oceania For Europe/Middle East/
ArcSoft Australian Support Centre Africa & Rest of the World
(Baulkham Hills, New South Wales) ArcSoft Europe Support Centre
Tel: [phone] (Ireland)
Fax: [phone] Tel: [phone]
E-mail: [email protected] Fax: [phone]
E-mail: [email protected]
Visit http:// www.arcsoft.com for technical support and frequently asked questions (FAQ’s).

20
12 Appendix
• Technical Specications
• Sensor Size 1/2” 2.0M pixel
• Focus Range 1.8m ~ Infinity
• Flash Range 1M to 2M
• Lens F 3.5 f=9.0mm
• Microphone Mono
• Display 1.5” TFT LCD screen
• Auto Power off 30/60/90 seconds
• Digital Zoom 3X
• I/O Port TV output stereo minijack
Memory slot Secure Digital card slot
USB Standard mini B type (v 1.1)
• Memory Internal 8MB NAND flash memory
External Secure Digital card (up to 256MB)
• Memory Priority 1. External memory (SD card)
2. Internal memory, disable if SD memory card inserted.
• Storable images (based on 8MB internal memory)
High - Approximately 20 images at 1600X1200
Middle - Approximately 30 images at 1280X960
Low - Approximately 98 images at 640X480
• Video (based on on 8MB internal memory)
Middle (10fps) - Approximately 1.5 minutes at 320 x 240
• Audio recording Approximately 10 minutes based on 8MB internal memory
• Battery Type Alkaline
Compatible with rechargeable NiMH
SIZE AA
Quantity 4 pieces (2 X AA for Camera; 2 X AAA for Flash Strobe)
• Operating System:
For Windows® Users: Microsoft® Windows® 98SE, ME, 2000 or XP
For Macintosh® Users: Mac® OS Version 9.2 ~ X.
• Uninstall Digital Camera Driver (PC) PC
1. Click Windows Start button.
2. Go to Setting -> Control Panel.
3. Double-click “Add or Remove Program”.
4. Choose the “Digital Cam” driver and Click “Change/Remove” to uninstall it.
5. The driver will be removed automatically.