Coolsteel CS-1DRR User manual

Commercial Refrigeration
Owner’s Manual
Applicable Refrigeration Models: CS-1DRR, CS-2DRR, CS-47DC, CS-78DC, CS-BDC48, CS-BDC59, CS-i0A27, CS-
i0A35, CS-i0A45, CS-RMPT27, CS-RMPT47, CS-RMPT60, CS-RMPT70, CS-RPPT67, CS-RPPT93, CS-RSPT27, CS-
RSPT47, CS-RSPT60, CS-RSPT70, CS-UCR27, CS-UCR48
Please read the entire owner’s manual before attempting to operate your machine.

Table of Contents
Owner’s Manual
Installation ......................................................................................................................................................................................... 3
Controls - How to Operate your Refrigerator ......................................................................................................... 3, 4
Cleaning .............................................................................................................................................................................................. 4
Troubleshooting ............................................................................................................................................................................. 4
General Safety ................................................................................................................................................................................. 5
Maintenance Safety ..................................................................................................................................................................... 5
Warranty ............................................................................................................................................................................................. 6

Installation
Controls - How to Operate Your Refrigerator
Owner’s Manual
Congratulations on your new CoolSteel purchase! Please read the enclosed information to help
you become familiar with your new machine.
Please ensure the machine has been transported in an upright position. If not, please let the unit
stand one hour before energizing it.
Refrigeration equipment must be properly installed. It must be indoors on a level oor, have
adequate air circulation, and be in a cool, dry environment. It cannot be in heat conditions that
exceed 26° Celsius (80° F). Operating efcienty may decrease in areas where relative humidity
is greater than 55%. Locations must be away from heat and moisture generating equipment
because ambient temperatures may cause the unit to malfunction and void the warranty.
The electrical components require proper grounding and a dedicated circuit. Any tampering will
void the warranty.
1. Plug in your machine.
2. Press the “SET” button for 2 seconds until the
CURRENT SETPOINT VALUE ashes on the
display.
3. Press the “UP” or “DOWN” buttons
accordingly to change the SETPOINT VALUE.
4. Once you are satised with the temperature,
press the “SET” button to modify and save the
current temperature.
Please note: Set points are 2° to 4° Celsius (35°
to 38° Fahrenheit) for a refrigerator.
Refrigeration Controls
When changing your temperature setting, be mindful when selecting your temperature set
point. Choosing a temperature that is too low will cause the coil to freeze and make the cabinet
warmer, which may damage your unit. To maintain correct airow inside your cabinet, your
shelving requires 2 to 3-inches of space between the back wall. Do not overll your refrigerator,
or your cabinet may become too warm.
Page 3

Controls - Continued
Cleaning
Troubleshooting
Owner’s Manual
Your new product is pre-programmed to run automatic settings when energized. During the
defrost cycle, a pre-set interval will commence internal components to melt any accumulated
frost on your evaporator, and the fan will continue to circulate air throughout your unit. Manual
defrost can be enabled by pressing both the “SNOWFLAKE” button and the “DOWN” button for
approximately 3 seconds.
Sandwich prep or pizza prep table machines are designed to function with all pans in place,
even if some pans are to be left empty. During non-use, ensure the cover lid is closed to allow the
temperature to reach your set point.
The compressor is not running.
Check your circuit breaker.
Check if your power cord is unplugged.
Check if your thermostat is too high.
Check if your machine is in a defrost cycle.
The condensing unit is running for too long.
Check if an excessive amount of warm product has been placed inside the cabinet.
Check if the door has been left open for too long, or if the door is open.
Check if the door gasket is sealing properly.
Check if the condenser or evaporator coil is dirty.
Check if the evaporator coil is iced up.
The cabinet temperature is too warm.
Check if the thermostat is set too high.
Check if the airow is blocked.
Check if an excessive amount of warm product has been placed inside the cabinet.
When cleaning your cabinet or shelves, we recommend using warm water with a mild soap. Your
evaporator and condenser will require an annual maintenance cleaning to be conducted by a
refrigeration technician.
Page 4

Owner’s Manual
General Safety
Maintenance Safety
It’s important to stay safe. This appliance has been designed with your safety in mind. It has
many features to keep you from being harmed. However, safe operation and maintenance are
your responsibilities.
1. When using this unit, please move it carefully. If on casters, be sure the casters do NOT run over
the power cord.
2. Lock the casters when in use.
3. Seek help when moving the machine. This machine is heavy. Be sure you have enough help to
avoid tipping or dropping the cabinet.
4. Prevent children from playing in or on the cabinet.
5. Follow all instructions. There are many safety labels and directions on the unit. Heed them.
6. Watch your ngers. There may be pinch points near the door hinges.
ALWAYS use a certied technician to repair R290 equipment.
ALWAYS use iBeeCool parts. Use of aftermarket parts can be dangerous with R290 equipment.
NEVER clean a frozen evaporator with a sharp object.
NEVER clean a dirty condenser with a sharp object.
NEVER store gasoline, kerosene, or any other ammable material near the cabinet.
Page 5

Owner’s Manual
Warranty
Limited Warranty: 2 Year Parts and Labour; 5 Year Parts-Only Warranty on the Compressor
CoolSteel refrigeration units have a 2-year warranty coverage on parts and labour, and 5 years, parts only, on com-
pressors. This is a limited warranty starting from the date of purchase. For further information, do not hesitate to
contact the undersigned.
Customer Service
166 Millennium Blvd
Moncton E1C 2G8
1.855.388.5999
support @ifoodequipment.ca
Terms and Conditions
This agreement constitutes the entire agreement between CoolSteel and the owner. All representations made by the
service provider, which are not included in this written agreement, are not part of this agreement. This agreement will
automatically be cancelled if the equipment is moved from the location indicated on the original invoice. All material
and labour not covered by this agreement will be provided at the owner’s expense. CoolSteel or the service provider
will not be held liable for any loss of product, damage or injury resulting from a delay in repairs, or improper installa-
tion. Maximum 100 kilometers for travel for units residing at a remote location as stipulated in this agreement.
Limitation of Liability
Any liability on the part of CoolSteel will under no circumstances, exceed the amount of the costs of the unit incurred
by CoolSteel to repair the equipment during Monday to Friday, between 8 am to 5 pm, and the reasonable costs re-
lated to the labour and parts replacement. CoolSteel reserves the right to charge a customer for non warranty claims
and to request a method of payment before a claim is dispatched. Refrigeration that is being used in a mobile appli-
cation, such as a Food Truck, will not be eligible for warranty coverage of any kind.
Owner’s Responsibilities
The owner is entirely responsible for the following items: All services or repairs not covered by this agreement.
Checking or replacing breakers and operating the equipment according to the manufacturer’s instructions and
performing routine maintenance or any special maintenance mentioned in the owner’s manual. Routine maintenance
includes cleaning the condenser and evaporator coil and drain tube. An annual preventive maintenance service is
strongly recommended. Providing the service provider with free access to the equipment and its controls. Moving all
materials, xtures or partitions that may interfere with the service provider’s work. Refrigeration equipment must be
properly installed and requires an indoor level oor and adequate air circulation in a conditioned environment where
the temperature does not exceed 26° Celsius (80° Fahrenheit). Electrical requires proper grounding and a dedicated
circuit, any tempering will void the warranty. CoolSteel reserves the right to void any warranty if any of the terms or
condition are not observed in accordance with conditions and limitations.
How to Obtain Service
Customers are required to register their purchases with customer service during hours of operation Monday to Fri-
day, 8 am to 5 pm, Atlantic time. When repairs are required, call 1-855-388-5999 and include your model and serial
number. If your service provider requires parts, have them reach us by email or give us a call to discuss part selection.
Page 6