COOLZY WARMZY Operating and maintenance manual

WARMZY Model PW1 User Guide EN2022 Rev1.0 1
USER GUIDE AND WARRANTY
Read the safety precauons rst!
Avoid using this product in a wet environment. Ensure that anyone
using this product is aware of normal safety precauons for house-
hold electric appliances.
Warmzy products are distributed by Close Comfort Internaonal Pte Ltd, Singapore, UEN
201527973E, and Close Comfort Pty Ltd, Australia,

2 WARMZY Model PW1 User Guide EN2022 Rev1.0
ABOUT WARMZY
Warmzy provides comfort when it is cold by warming your legs and lower body. This
part of the body loses most heat in cold condions while sing down or reclining.
Place Warmzy over the legs and lower body and wrap it around the sides.
A wool cap will also help slow heat loss from the head, especially in very cold condi-
ons.
Warmzy is an electric throw blanket. When addional warmth is needed, a small
electric current ows through wires made from a special alloy inside the blanket. As
the blanket warms, the resistance of the wires increases, reducing the current ow.
The controller also regulates the current.
Warmzy provides addional warmth just where it is needed. Therefore there is much
less need to warm whole rooms and buildings. Warmzy is one way to use electric
energy very eciently, helping to minimize harmful eects on the environment. Also,
exposing parts of the body to cold air helps to improve the body’s thermal resilience
and cardiovascular funcon which can be benecial for health.
OPERATING WARMZY
Please read this guide carefully and follow the instrucons
to ensure that Warmzy is safe to use.
1. Check that Warmzy is dry, especially aer washing the
blanket or spilling liquid onto the blanket. If there is any
sign of moisture in the rug, hang it on a drying rail unl
it is completely dry.
2. Check that the controller connecon to the banket is
secure.
3. Insert the plug into a nearby electrical socket, then
switch on the power.
4. Ensure that the power cable will not be squeezed by
moving heavy furniture.
5. Push the ON/OFF slider towards the display to the ‘ON’
posion.
6. Set the desired power level with the “+” or “-“ buons
within 5 seconds aer switching the rug on.
7. The controller will switch o the power aer two hours automacally. Use the
‘MENU’ buon to select the mer adjust funcon if a shorter or longer operang
me is needed.
8. Enjoy Warmzy’s comfort.
9. At any me, press “MENU” for more than 2 seconds to enable the power level
and mer to be adjusted up or down. Adjustment is possible when the number
display ashes on and o.
When connecng the con-
troller to the rug, ensure
that the V marks align with
each other.

WARMZY Model PW1 User Guide EN2022 Rev1.0 3
Pull the ON/OFF slider back to the “OFF” posion when electrical heang is not
required.
ESSENTIAL SAFETY PRECAUTIONS
As with any electrical appliance, it is essenal to understand and follow simple safety
precauons. If Warmzy is used incorrectly, it is possible that faults can occur leading
to overheang, re or personal injury.
1. Always supervise children and people with disabilies or heat-sensivies.
Warmzy must not be used with children under 3 years old or with people who
cannot understand these safety precauons.
2. This product only works with a 220 – 240 Volt AC electrical supply with frequency
50 – 60 Hz. Do not use this product with dierent electricity supplies.
3. Warmzy works with standard ulity electricity supplies and baery/solar inverters
that comply with ulity power specicaons. Avoid using Warmzy with small gen-
erators and inverters that may not comply with ulity power specicaons.
4. If the power plug does not t the electrical supply socket, contact a qualied elec-
trician or use an appropriate adapter.
5. Do not use Warmzy with another electrically heated blanket or rug.
6. Do not fold or roll up Warmzy while the electrical heang is on.
7. Ensure that Warmzy is not covered by another blanket or squeezed between
cushions while the electrical heang is on.
8. Never use pins or sharp objects with Warmzy because they can damage the elec-
trical wires.
9. Never dry-clean Warmzy because the uid will cause severe damage to Warmzy.
10. Keep cats, dogs and other pets away from Warmzy because sharp claws can dam-
age the blanket and wires.
11. Keep the cable and controller dry at all mes. If any parts of Warmzy accidentally
get wet, unplug Warmzy from the electrical supply immediately. Wipe o any
visible moisture and allow Warmzy to dry before using it again.
12. When storing Warmzy, coil up the cable loosely to avoid damage. Do not wrap the
cable ghtly around the controller.
CARE INSTRUCTIONS
Use a clean, damp cloth to remove small amounts of dirt or other foreign material.
Ensure that Warmzy is completely dry before connecng Warmzy to the electrical
power supply and switching on the electrical heang.
Never dry-clean Warmzy because the uid can damage the insulaon on the electri-
cal wires.

4 WARMZY Model PW1 User Guide EN2022 Rev1.0
Washing Instructions
Unplug Warmzy from the electrical supply outlet.
Disconnect the controller from Warmzy before washing.
The best way to clean Warmzy is washing by hand in a bowl of warm water with mild
detergent or soap. Soak Warmzy for 5 minutes. Then gently squeeze each part of the
material for about 5 minutes. Never rub or scrub the material.
Never use bleach with Warmzy because it can damage the electrical wires.
Aer washing, rinse Warmzy with warm water unl all traces of the detergent or
soap have gone. Squeeze out the water by hand. Never twist the material or use a
mechanical wringer.
Drying Instructions
The best way to dry Warmzy is drape the material on a drying rail in a shaded locaon
such as a bathroom. Do not use pegs as they can damage the electrical wires.
If a tumble drier is needed, ensure that it operates with warm air only, not hot air.
Avoid using laundromat driers because they usually only provide high temperature air
for drying.
If some wrinkles indicate some shrinkage, gently stretch the blanket aer it is dry.
Storage Instructions
Fold Warmzy and store in a clean, dry place like any bedding product. Warmzy comes
with a coon storage bag.
TROUBLESHOOTING
No heating, and no light or numbers on controller are visible
Check that the power connecon works by connecng another appliance. Check that
the controller connecon to the blanket is secure.
Controller lights operate but there is no apparent heating
Test Warmzy by folding the rug on itself for 5 minutes and switching on the power.
Feel the warming with a hand between the layers. Never leave the heang on while
the blanket is folded.

WARMZY Model PW1 User Guide EN2022 Rev1.0 5
I feel some warming but it is not hot
In cold condions with normal clothing, Warmzy will provide enough warmth for
comfort while sing or reclining with room temperature above 10 °C. Warmzy will
never feel hot when touched.
Warmzy replaces heat that would be released by physical
activity.
Experiment with dierent power sengs to nd the most appropriate level.
Drink plenty of water. Even gentle heang will cause uid loss from the body.
Excessive heang can be damaging for health.
Can I sit or lie on Warmzy?
Yes you can. However, Warmzy is most eecve when placed over the legs and lower
body.
The heating works fine, but then stops
Warmzy has an automac mer that switches o the heang aer a set me. Follow
instrucons on page 2 to change the mer seng.
The plug causes a spark when inserted into a power socket
If the power socket is switched on when the plug is inserted a spark can occur. This
is normal for any electrical device and does not normally cause any damage. Try to
remember to switch o the power outlet before connecng an appliance.
Controller seems warm
This is normal. The electronic controller releases a small amount of heat while it is
operang normally.
SUPPORT
www.warmzy.com provides FAQs and helpful informaon, updated frequently, along
with your local retailer and service agent informaon and your local customer sup-
port phone number.
Ask any general, support, warranty or technical quesons by emailing us at
[e-mail].

6 WARMZY Model PW1 User Guide EN2022 Rev1.0
SPECIFICATIONS
WARMZY
Model number PW1
Power source 220 - 240 V AC, 50-60 Hz
Minimum operang voltage 185 V
Rated power input 150 W

WARMZY Model PW1 User Guide EN2022 Rev1.0 7
WARRANTY
Coolzy and accompanying accessories are warranted against defects in design,
materials and workmanship. The warranty period is 2 years from the date of original
purchase, provided the purchaser registers their details at hps://www.warmzy.
com/support/warranty/. Without purchase registraon, the warranty period is one
year. This warranty is valid for the European market.
Defects in equipment covered by this warranty will be repaired or replaced at Close
Comfort’s opon at no charge to the purchaser for parts or direct repair labour. The
purchaser must return the product(s) to an authorized Warmzy dealer or agent for
warranty repairs. Home service is not provided. The purchaser is responsible for all
transportaon costs and in-transit insurance associated with returning the device to
the authorized repair centre. In some cases, the purchaser will be able to make the
necessary repair or replacement.
Any part or equipment replaced under this warranty will be warranted in accordance
with the following provisions with the terms of this warranty for the remainder of the
original warranty period, or 60 days from return, whichever is greater.
THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF ANY OTHER WRITTEN
WARRANTY, EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING WARRANTIES
RELATING TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). IN NO
EVENT SHALL THE SELLER OR CLOSE COMFORT BE LIABLE FOR ANY SPECIAL, INCIDEN-
TAL CONSEQUENTIAL OR INDIRECT DAMAGES. Nothing in the limited warranty limits
or restricts any rights granted by naonal consumer legislaon.
Warranty Exclusions
1. Damage, trouble, or unsasfactory performance of the device caused by faulty or
improper external wiring, improper power supply, voltage uctuaons, power surges,
or electromagnec interference not originang from the device.
2. Damage or problems caused by the use of an accessory, component or equipment
not supplied by Close Comfort.
3. Damage or trouble caused by storm, re, ood, vandalism, negligence, accident,
force majeure, earthquake, war, vermin, foreign maer entering the device (e.g. dirt
and moisture) or any other outside organism.
4. Freight charges (including insurance) incurred by the owner in returning the appli-
ance to Close Comfort or an authorized repair center, dealer or agent.
5. In-home or on-site service and all associated costs.
6. Any consumable item (eg baeries) supplied with the device, unless the item is
found to be defecve at the me of purchase.
7. Damage or problems or unsasfactory performance resulng from operaon in an

8 WARMZY Model PW1 User Guide EN2022 Rev1.0
environment where the comfort of people is not the primary funcon of the unit.
8. Damage caused by operaon in a corrosive atmosphere or excessive humidity.
9. Damage from problems or unsasfactory performance resulng from operaons
under condions other than those specied in the Close Comfort technical or com-
mercial documentaon applicable to the device.
10. Damage, trouble or unsasfactory performance resulng from misapplicaon of
the unit.
11. Damage or problems caused by repair work carried out by someone who has not
been authorized by Close Comfort to carry out repairs.
Owner responsibilities
Use and care of the device in accordance with the instrucons for use provided with
the device.
Warranty claim steps
1. Stop using the device and unplug it from any power source.
2. Contact the retailer where the product(s) were purchased.
3. If the product(s) were purchased directly from Close Comfort, report the defect
and provide a detailed descripon with photos, sound recording or video if possible.
Email these details to [e-mail], or use the contact form at hps://
www.warmzy.com/.
4. Once acknowledgment is received, follow Close Comfort’s instrucons on prepar-
ing to return and sending unit for warranty evaluaon.
5. Provide proof of original purchase, such as a retailer’s sales receipt, or proof of
payment of an original tax invoice.
DISPOSAL
This marking indicates that this product should not be
disposed with other household wastes. To prevent possible
hazards to the environment or human health from uncon-
trolled waste disposal, please recycle it to prove the sus-
tainable reuse of material resources. Please ask ‘return and
collecon’ systems or contact the retailer where the product
was purchased to return your used device, they can recycle
products safely.