DEERTV Outdoor TV Enclosure User manual

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
DEERTV
Outdoor TV Enclosure
Installation Guide
Address: Liaobu, Dongguan, Guangdong, China, 523018
Tel: [phone] Email: [e-mail]

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
Outdoor TV Enclosure Installation
Windows Type
The Weatherproof TV enclosure which
supports the 95% popular TV size. Available for
outdoor and indoor, the outdoor TV cabinets
are specially built to filter and cool ambient air,
expel internal heat, which ensures your TV
working for a long time within a safe and
optimal environment. Read home Theater
article for any comprehensive having a look at
airborne contaminates of your house and what
this will likely caused by your TV system. There
are a few tips we could present you from the
very beginning that may help you with one of
these as well as other common problems as
you are expecting your TV enclosure to reach.
Prepare Tools.
⚫Phillips screwdriver
⚫Hexagon screwdriver
⚫Universal TV mount bracket (Normal home TV bracket)
⚫Scissors and utility knife
⚫Silicone sealant (glass glue)
⚫Glass Or acrylic (If you have not chosen it)
Parts List.
Name
Description
Quantity
Picture
M6*50 and M6*20 Screws
For TV VESA
5 / type
Thick pad washers,10/15/20mm
For TV VESA
5 / type
M4*5 thumb screws
For rear housing
4
M4 flange nuts
For front door
10
M8*16 screws
For Enclosure VESA hole
5

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
A. Install Front Enclosure
1. Check all accessories.
2. Prepare the glass. (If you have chosen the optional glass/acrylic, please ignore this step)
43” enclosure glass dimension is 987 x 595 x (3~5mm thickness)
55” enclosure glass dimension is 1257 x 745 x (3~5mm thickness)
65” enclosure glass dimension is 1477 x 870 x (3~5mm thickness)
75” enclosure glass dimension is 1707 x 995 x (3~5mm thickness)
3. Assemble the rear enclosure and fill the gap with silicone sealant. (Components: 2 pcs Back Enclosure, M4 flange nuts)
/*Only for Size > 60” Enclosure. 43” and 55” are not needed*/
Silicone sealant
For acrylic and gap
Prepare by
yourself
M4 Socket wrench
For M4 nuts
1
Lock cleats
Optional key locks
1

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
4. Assemble the front enclosure. (Components: 4 front frames, M4 flange nuts, M4 socket wrench).
5. Remove the 3M Double-sided adhesive protective film on the front enclosure.
6. Install the glass/acrylic from this direction.
7. Add silicone sealant to the glass/acrylic edge area and all gap area, to ensure it is complete waterproof.
8. Finished, put the front enclosure flat on the ground and let the silicone sealant cure for about 30 minutes.

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
B. Install TV
1. Calculate the middle point of the TV height and mark it. (For example, The TV height is 55cm and its middle
position is 27.5cm)
2. Install the Mount arm for the TV, ensure the center point is near the TV middle position.
3. If your TV thickness is less than 7cm, please add the thick pad washers and ensure the total thickness is around
7~8cm.
4. Lock the bracket screws, the TV installation is finished.

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
C. Install Rear Enclosure
1. Install the Universal TV mount to the wall. (You can use any home TV mount, for this bracket, we do not supply it,
please prepare it youself).
2. Install the mount ARM for the rear enclosure and fixed by screws.
3. Mount the rear enclosure on the wall, finished

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
D. Assembly together.
1. Connect all cables: AC cable, the USB cooling fan cable connected to the TV USB port. Mount TV on the rear enclosure.
2. Adjust the TV position horizontally to center the TV. Mount the front enclosure to the rear enclosure.
Very Important: Please put the front Enclosure pass through TV first (No Angle) then adjust the angle to mount the
rear enclosure if your TV is big enough.
// If there is a deviation during assembly, you may need to slowly combine the front enclosure and rear enclosure together. //
3. Use thumb screws to fix the front enclosure and the rear enclosure. There are 3 thumb screws in total, and you must
install at least 1pcs thumb screw. // The positions of the 3 thumb screws are on the backside or bottom area, see below picture. If
there is a deviation during assembly, you may need to slowly screw it together. //

DeerTV Company
COPYRIGHT © www.deertv.com | DeerTV Company. All rights reserved
4. Finished, turn on the TV, enjoy your favorite TV programs. Thank you very much for choosing DeerTV products.
Best wishes to you and your family.
E. Optional lock pins (Not necessary).
Not necessary for home use, only recommend add it for public places
Drill an M4 size hole at the cables outlet of the front and rear TV enclosure position.(Bottom area)
Use the M4 nuts fix the LOCK pins.