Definitive technology Procenter 1000 User manual

Congratulations

Congratulations on your purchase of a Deﬁnitive Technology ProSub

Subwoofer.This revolutionary subwoofer utilizes state-of-the-art components,

anon-resonant monocoque cabinet and low diffraction construction in order to

achieve the most lifelike sound possible in your listening room for many years

to come. The ProSub is a compact, high quality powered speaker system

intended primarily for use as a subwoofer in superior quality music or home

theater systems.

This ProSub powered subwoofer incorporates a high current power

ampliﬁer, electronic crossover and precise equalization in order to achieve the

highest possible level of low frequency performance. The ampliﬁer and elec-

tronic crossover are completely self-contained modules which are housed in

the subwoofer. The ProSubs incorporate Deﬁnitive’s proprietary PowerField

technology, by which the ampliﬁer is speciﬁcally engineered in conjunction

with the driver for optimum load matching and power transfer characteristics.

The integrated electronic crossover incorporates high level inputs and outputs

as well as a low level input, precise equalization, continuously variable low pass

ﬁlter (between 40 and 150 Hz), ﬁxed speaker level high pass ﬁlter (to match

the ProMonitors) and a precision volume control. The tremendous built-in

ﬂexibility allows easy, seamless integration with all main speaker systems and

optimum performance in any room. The crossover incorporates circuitry which

allows for exceptional performance as either a single subwoofer or when two

subwoofers are used.

Our engineers have spent many years in developing this product. To ensure

that you only experience the ﬁnest performance possible from your subwoofer,

we encourage you to take a moment with this owner’s manual and familiarize

yourself with the proper installation and setup procedures for your subwoofer.

ProSub 800/1000

PowerField®Subwoofer with

Active Crossover & Power Ampliﬁer

Owner’s Manual

Deﬁnitive Technology warrants to the original retail purchaser only that this Deﬁnitive

Technology Loudspeaker Product (the "Product") will be free from defects in materials and

workmanship for a period of ﬁve (5) years covering the drivers and cabinets, and three (3)

years for the electronic components from the date of the original purchase from a Deﬁnitive

Technology Franchised Dealer. However, this warranty will automatically terminate prior to

the expiration of ﬁve (5) years for the drivers and cabinets and three (3) years for the electronic

components if the original retail purchaser sells or otherwise transfers the Product to any other

party. The original retail purchaser shall hereinafter be referred to as "you." To obtain the war-

ranty protection for your Deﬁnitive Technology Product(s), you must ﬁll out the Warranty

Registration Card(s), within ten days of the date of purchase.

Defective Products must be shipped, together with proof of date of purchase, prepaid

insured to the Franchised Dealer from whom you purchased the Product, or to the nearest fac-

tory service center. Product(s) must be shipped in the original shipping container or its equiva-

lent; in any case the risk of loss or damage in transit is to be borne by you. If, upon examina-

tion at the Factory or a Deﬁnitive Technology Franchised Dealer, it is determined that the unit

was defective in materials or workmanship at any time during this Warranty period, Deﬁnitive

Technology or the Deﬁnitive Technology Franchised Dealer will, at its option, repair or

replace this Product at no additional charge, except as set forth below. All replaced parts and

Product(s) become the property of Deﬁnitive Technology. Product(s) replaced or repaired

under this Warranty will be returned to you, within a reasonable time, freight collect.

This Warranty does not include service or parts to repair damage caused by accident, mis-

use, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage in

excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attrib-

utable to defects in materials or workmanship, or service, or repair or modiﬁcation of the

Product which has not been authorized by Deﬁnitive Technology.

Deﬁnitive Technology makes no Warranty with respect to its Products purchased from

dealers or outlets other than Deﬁnitive Technology Franchised Dealers.

This Warranty is in lieu of all other expressed Warranties. If this Product is defective in

material or workmanship as warranted above, your sole remedy shall be repair or replacement

as provided above. In no event will Deﬁnitive Technology be liable to you for any incidental or

consequential damages arising out of the use or inability to use the Product, even if Deﬁnitive

Technology or a Deﬁnitive Technology Franchised Dealer has been advised of the possibility

of such damages, or for any claim by any other party. Some states do not allow the exclusion or

limitation of consequential damages, so the above limitation may not apply to you.

All implied warranties on the Product are limited to the duration of this expressed

Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the

above limitations may not apply to you. This Warranty gives you speciﬁc legal rights, and you

also may have other rights which vary from state to state.

Limited Warranty:

5-Years for Drivers and Cabinets,

3-Years for Electronic Components

This product complies with the essential requirements of

EMC directives 89/336/EEC and 73/23/EEC (inclusive of

93/68/EEC) and carries the CE mark accordingly.

DMAT 091605

Service and warranty work on your Deﬁnitive loudspeakers will normally

be performed by your local Deﬁnitive Technology dealer. If, however, you

wish to return the speaker to us, please contact us ﬁrst, describing the

problem and requesting authorization as well as the location of the nearest

factory service center. Please note that the address given in this booklet

is the address of our ofﬁces only. Under no circumstances should loud-

speakers be shipped to our ofﬁces or returned without contacting us ﬁrst

and obtaining return authorization.

Deﬁnitive Technology Ofﬁces

11433 Cronridge Drive, Suite K

Owings Mills, Maryland 21117

Phone: 410-363-7148

Service

CAUTION! To reduce the risk of electric shock and ﬁre, do not remove the cover or back

plate of this device. There are no user serviceable parts inside. Please refer all servicing to

licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert

the user to uninsulated “dangerous voltage” within the device’s enclosure. The international

symbol of an exclamation point inside a triangle is intended to alert the user to the presence

of important operating, maintenance and servicing information in the manual accompanying

the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la ﬁche dans

la borne correspondante de la prise et pousser jusqu'au fond.

CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain

or moisture.

1. Read Instructions—All safety and operating instructions should be read before operating the device.

2. Retain Instructions—The safety and operating instructions should be retained for future reference.

3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4. Follow Instructions—All operating and safety instructions should be followed.

5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.

7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended

by the manufacturer.

8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It

should never be placed in a built-in installation or anywhere that may impede the ﬂow of air through its

heat sink.

9. Heat—Never locate the device near heat sources such as radiators, ﬂoor registers, stoves or other

heat-generating devices.

10. Power Supply—The device should only be connected to a power supply of the type described in the

operating instructions or as marked on the device.

11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or

crushed by items placed on them or against them. Special attention should be paid to areas where the

plug enters a socket or fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.

13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.

14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside

the device.

15. Damage Requiring Service—The device should be serviced by licensed technicians when:

•The plug or power supply cord has been damaged.

•Objects have fallen or liquid has spilled inside the device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a marked change in performance.

•The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians. Only replacement parts

speciﬁed by the manufacturer should be used. The use of unauthorized substitutions may result in

ﬁre, shock, or other hazards.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

2 11

ProSub Speciﬁcations

ProSub 1000

Outer Dimensions: 12

17.9

14.4

Frequency Response: 18 Hz – 150 kHz

Driver Complement: One 10" woofer with polymer cone coupled to

one 10" infrasonic radiator

Ampliﬁer: 300-Watts RMS

Speaker Level High-Pass Filter: 6db/octave (80 hz)

Low-Level Low-Pass Filter: 24 db/octave continuously variable

(40 hz – 150 hz) plus unﬁltered LFE direct-

coupled input

Fuse Size: 3.2 amp 250 volt slow-blow Littlefuse 313

type for the 110 volt version, and 2 amp 250

volt slow-blow BEL 5ET type for the 240

volt version.

ProSub 800

Outer Dimensions: 10.3

15.8

12.9

Frequency Response: 20 Hz – 150 kHz

Driver Complement: One 8" woofer with polymer cone coupled to

one 8" infrasonic radiator

Ampliﬁer: 300-Watts RMS

Speaker Level High-Pass Filter: 6db/octave (80 hz)

Low-Level Low-Pass Filter: 24 db/octave continuously variable

(40 hz – 150 hz) plus unﬁltered LFE direct-

coupled input

Fuse Size: 3.2 amp 250 volt slow-blow Littlefuse 313

type for the 110 volt version, and 2 amp 250

volt slow-blow BEL 5ET type for the 240

volt version.

Speciﬁcations subject to change

Your new ProSub Subwoofer contains a built-in ampliﬁer and sophisticated

electronic crossover. There are several ways to install your subwoofer.

One setup is not considered “better” than another; rather, each is a function

of what type of entertainment system you own and how you plan to

integrate your components. Read the installation suggestions below to

determine which options best suit your needs. Please take care to perform

all wiring procedures with your system

completely powered down.

Subwoofer Installation

Unpacking

Each loudspeaker leaves our plant in perfect condition. Any visible or

concealed damage most likely occurred in handling after it left our plant, and

should be reported at once to your Deﬁnitive dealer or the delivery company

that delivered your loudspeaker.Please unpack your system carefully.Save all

cartons and packing material in case you move or need to ship your system.

Record the serial number found on the back of the subwoofer in the appropriate

place on your warranty card.

Inputs/Outputs

Your Deﬁnitive Technology ProSub subwoofer operates from either

high level (speaker-type) or low level (RCA-type) outputs on your

electronics. Use the low level jack when connecting the subwoofer to

the LFE output jacks of a receiver, a preamp or a signal processor.

Use the high level speaker terminal inputs to connect the subwoofer

to the ampliﬁer output (speaker) jacks of your receiver or ampliﬁer.

Use the high level output jacks to connect the subwoofer to a pair of

left and right main speakers. (See wiring diagrams.)

When connecting the subwoofer to your system, it is recommended

that you use high quality speaker cable and try to maintain cable runs

of the same length for the left and right channels. Should you perchance

experience any level of ground hum or noise, try plugging the

subwoofer into the same circuit as your ampliﬁer. Also, consult the

“Troubleshooting” section of this manual. To prevent accidental damage

to your subwoofer from overdriving the system, the subwoofer features

an internal overload protection circuit.

If you experience any difﬁculties with your subwoofer, try the

suggestions described below. If you are still having problems, please

consult your Deﬁnitive Technology Authorized Dealer for assistance.

1. Make sure all your system interconnects and power cords are solidly

in their place.

2. Should you experience any level of ground hum or noise, try plugging

the subwoofer into the same circuit as your ampliﬁer. Please note that

some cable TV hookups induce hum into the whole system and

require a special isolation device. Please consult your dealer.

3. The system is provided with sophisticated internal protection

circuitry. If for some reason the protection circuitry is tripped, please

turn down your system’s volume and wait ﬁve minutes before trying

the system again. If the ampliﬁer should overheat, the system will

turn itself offuntil the ampliﬁer cools and resets.

4. Check to be sure that your power cord has not been damaged.

5. Check that no foreign objects or liquid has entered the cabinet.

6. If you cannot get your subwoofer to turn on or if no sound comes out

and you’re sure the system is set up properly,please bring the sub-

woofer to your Deﬁnitive Technology Authorized Dealer for assistance.

Troubleshooting

10 3

It is our pleasure to offer assistance if you have any questions

regarding your ProSub or its set-up. Please contact your

nearest Deﬁnitive Technology dealer or contact us directly at

410-363-7148.

Technical Assistance

* Dolby Pro-Logic, AC-3 and Dolby Digital are Registered Trademarks of Dolby Laboratories Licensing Corporation.

Visit us at www.deﬁnitivetech.com

Your Deﬁnitive Technology subwoofer has been designed to operate

at frequencies generally below 150 Hz. Because low-frequency infor-

mation in this range essentially is non-directional, your subwoofer can

be located anywhere in your listening room that is most convenient.

Also, the continuously variable low pass ﬁlter operates at a very fast

roll-off, ensuring great performance wherever you place your subwoofer.

There are, however, some general rules that you should bear in mind

when locating your subwoofer:

1. For maximum output the subwoofer should be placed in a corner or

against the wall.

2. Corner placement will increase the subwoofer’s efﬁciency, which in

turn will increase your system’s maximum output and improve the

dynamic capability of the subwoofer.

3. While one Deﬁnitive Technology subwoofer will always sound great,

the use of two subwoofers will deﬁnitely enhance your system’s

performance by providing a smoother and more consistent response

pattern. Here, it is recommended that you locate the subwoofers on

the same side of the room as the main speaker of the same channel

(if you are feeding them discrete left and right channel signals).

4. When using the ProSub with Deﬁnitive ProMonitors, consult the

ProMonitor instruction manual for other placement tips.

Subwoofer Placement

4 9

Low Level LFE Connections

Most new model receivers, preamps and decoders feature a mono

(line level) output intended to be used with subwoofers. This is the

simplest connection method to use. You can feed the mono or LFE

subwoofer output of your receiver or decoder to the LFE low level

input on the subwoofer and achieve full performance.

Usually, if your

receiver or decoder already has a built-in low pass crossover, you should

turn the low pass control on your ProSub to 150. Also, these subwoofer

outputs tend to have less gain than main line level outputs, thus the gain

control on your subwoofer may need to be adjusted accordingly for

proper balance. Use the LFE input on the subwoofer to hook the sub-

woofer up to the LFE (low frequency effects) output on Dolby Digital

AC-3*decoders, receivers, etc.

Wiring Diagrams

current going to it will reactivate itself with a pop when AC current is

restored, which is normal.

Please note that after the cessation of a signal, it may take up to an

hour for the ampliﬁer to actually turn off from active to standby mode.

In some instances, because of RF presence in your area, the red LEDs may

not turn off. However, this is nothing to be concerned about as the ampliﬁers

draw almost no power when they are idling.

When using the ProSub with Deﬁnitive ProMonitors, please consult

your ProMonitor instruction manual for speciﬁc information regarding

hookup, wiring and placement.

Setting the Level and Crossover Frequency When Using

the ProSub with ProMonitors

When you have the ProMonitors wired to the speaker level outputs

on your ProSub, the following are our suggestions for starting settings

on your controls. Remember,these are just approximate settings and we

suggest experimenting to determine the best-sounding settings for your

particular set-up.

Set the variable low pass crossover control on

the back of the ProSub to approximately 2

o’clock. Please note that the exact frequency

will depend on many factors including speciﬁc

positions of the speakers in the room, so you

might experiment with a slightly higher or

lower setting to achieve ideal blending

between the sub and the satellites for your

particular set-up. Listen to a wide variety of

music to determine the correct setting for this

in your system.

Set the subwoofer level control to 12 o’clock.

Please note that the exact level depends on

many factors including your room size,

position of the speakers, etc. as well as your

personal listening taste, so you might

experiment with the subwoofer level while

listening to a wide variety of music until you

achieve the ideal setting for your system.

Using the ProSub with Deﬁnitive ProMonitors

High Level Speaker Wire Connections

Your Deﬁnitive Technology ProSub subwoofer can also be hooked up

via high level connections. In this situation, you have the option of running

your main speakers “full range” or rolling off the low end by using the high

pass ﬁlter built into the subwoofer. For high level wiring, your interconnects

are simply equal distance lengths of high quality speaker cable.

To hook up your ProSub subwoofer via the high level connections,

simply run speaker cable from the right channel high level connector on

the subwoofer to the right channel speaker connector of your receiver or

ampliﬁer. Repeat this process for the left channel. Please take care that

the red (“+”) terminal on the subwoofer is connected to the red (“+”)

terminal on your receiver or ampliﬁer, and that the black (“-”) terminal

on your receiver or ampliﬁer is connected to the black (“-”) terminal on

the subwoofer. This will ensure absolute phase throughout your system.

Your main speakers can now be connected in one of two ways. If you

wish to utilize the high pass ﬁlter built into your subwoofer, simply

connect your main speakers to the high level out terminals on the

subwoofer.Again, take care to make red to red (“+”) and black to black

(“-”) terminal connections. This connection will provide a smoothly

contoured roll-offof the low frequencies going to your main speakers.

We recommend this hook-up (wiring the main speakers through the

crossover in the subwoofer) when using ProMonitors. For more overall

8 5

Your Deﬁnitive Technology ProSub subwoofer is equipped with a

full complement of operating controls to ensure complete ﬂexibility and

maximum performance in any installation. Most of them basically are the

“set and forget” type, although occasionally certain controls will require

minor adjustments.

Gain Control

On the back panel of your subwoofer is a gain (volume) control.

This control is used to raise or lower the output level of your subwoofer

in relation to the other speakers in your system.

Low Pass Filter

Your subwoofer’s back panel features a continuously variable low pass

ﬁlter. This ﬁlter is continuously variable between 40 and 150 Hz. This

low pass ﬁlter control is used to obtain the optimum transition between

the subwoofer and your main speakers. This control should be set by ear

for best performance in your room. Set it to where it sounds best to you.

If you are running your main speakers full range, we would generally

recommend setting the low pass ﬁlter fairly low (40-70 Hz). If you are

connecting your ProSub using the the LFE in, turn the low pass ﬁlter all

the way up in order to get optimal impedence matching.

When using the

ProSub with Deﬁnitive ProMonitors, please consult the instruction

manual section “Using the ProSub with Deﬁnitive ProMonitors.”

Operating Controls

Your subwoofer contains a built-in, active powered subwoofer section

as well as an electronic crossover and so each subwoofer must be plugged

into an electrical socket of the appropriate voltage (as indicated on the

back of your unit) using the plug on the end of the black cord attached to

the electronics module on the back of the loudspeaker.The subwoofer has

aspecial circuit which automatically turns the powered subwoofer section

on when a signal is fed to the loudspeaker and does not require an on-off

switch. The red LED on the back panel will light up when a signal is

sensed and the ampliﬁer turns on. It will automatically turn off a little

while after the signal is discontinued.

The ProSub has a special circuit which automatically turns the pow-

ered subwoofer section on when a signal is fed to the loudspeaker and

does not require an on/offswitch. We suggest plugging the ProSub into a

circuit which is on all the time and not into a switched outlet. When the

ProSub is plugged into a circuit and receives AC current, initially you

will hear a relatively loud pop which is completely normal as the system

ﬁrst activates itself to stand-by mode. Then, when a program signal is fed

to the speaker it will fully activate itself with a lower level pop which is

normal. If you unplug the speaker or turn off the AC current going to it,

Powering Up Your Subwoofer

bass output when using full range main speakers, run the main speakers

full range by hooking them up directly to the amp. In many systems, if

your speakers are true full range systems, you may ﬁnd that you get a

more satisfying sound by running the speakers full-range and crossing

your subwoofer in fairly low (40-70 Hz). On the other hand, if you ﬁnd

that you are overdriving your main speakers, you will clearly be able to

play your system louder by using the built-in high pass crossover for

your main speakers.

The Advantages of Multiple Subwoofers

Deﬁnitive’s ProSub subwoofers are engineered to be used singly or in

pairs. With a single subwoofer, both left and right signals are sent to the

subwoofer wherein they are combined via the electronic crossover into

one composite signal. With two subwoofers, the left and right low fre-

quency signals can be reproduced by their own individual subwoofers or

two subwoofers can be just doubled up on the LFE channel with a Y con-

nector. The use of one subwoofer achieves outstanding performance;

however, the addition of a second subwoofer clearly offers the highest

level of performance achievable for both movies and music. The use of

stereo subwoofers smoothes out the peaks and dips which result from the

eigenmodes in your room. Two subwoofers couple much better to the air

in your room (four times better) and of course offer double the power. In

addition, some state-of-the-art home theater installations have begun

to use a separate subwoofer hooked up to the rear (surround) chan-

nels and we recommend this for the absolute ultimate in performance.

In addition, some state-of-the-art Dolby Digital* home theater instal-

lations have begun to use a separate subwoofer hooked up to the rear

(surround) channels and we recommend this for the absolute ultimate

in performance.

Dual Subwoofer Connections

When hooking up a stereo pair of subwoofers, wiring is quite similar to

traditional high level connections. Here, instead of running both speaker

cables from your receiver or ampliﬁer to the left and right high level terminals

on the subwoofer, you will run the left channel to the left channel subwoofer

and the right channel to the right channel subwoofer. Again, take care to make

red to red (“+”) and black to black (“-”) terminal connections.

Don’t worry that on your left subwoofer the right channel terminals

will be empty and that on the right channel subwoofer the left channel

terminals will be empty—both channels are combined at the subwoofer’s

input stage. There is a possibility that with this type of wiring

you may

need to increase your gain a little bit for proper balance.

Adual subwoofer system using low level connections is equally

simple, just put a Y connector on your LFE output and run one cable

to each subwoofer.

6 7

Your receiver or decoder has a bass management system which

ABSOLUTELY must be set for you to get proper performance from

your system. This is not something that is subtle in its importance.

It is absolutely critical. In general if you are setting up a ProCinema

System using our ProSubs, ProMonitors and ProCenters, follow these

simple instructions:

•If you are hooking up the sub with the low level LFE connection,

set your receiver/decoder bass management to “Sub – Yes” and set

left main, right main, center, left rear and right rear to “Small.”

•If you have a choice of crossover frequency, choose the highest

one available.

•If you use a speaker level connection where you run the speaker

wire from the receiver to the sub adn then from the sub to the left

and right mains, set “Sub – No,” left main and right main to

“Large,” and center, left and right rear to “Small.”

•Also make sure you properly set the channel balance as outlined

in your receiver/decoder manual. There is also more detailed

information in your ProMonitor manual.

Critical Bass Management Settings

*NOTE: If you

wish to run your

main speakers

full range with

no low frequency

roll-off, hook

them directly to

the main speaker

output terminals

or your receiver

or ampliﬁer as in

any normal hi-fi

system.

AMPLIFIER OR RECEIVER