dixell xweb 5000 User manual

OPERATION MANUAL

WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE
PRODUCT‟S ENCLOSURE THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
WARNING:
Use only modems supported by this monitoring unit. Dixell S.p.a
can accept no responsibility for possible damage due the usage
of not supported modems.
WARNING:
Dixell S.p.a. reserves itself the right to alter this manual without
notice. The last version available can be downloaded from the
website.
WARNING:
This manual describes XWEB unit with system release 4.0
WARNING:
This controlling and monitoring unit is compliant with standard
EN 12830 if it is used together with probes that are compliant with
standard EN 13485
WARNING:
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.

XWEB5000 Operation Manual
INDEX
INTRODUCTION................................................................................................ 7
CAUTION: READ THIS PAGE CAREFULLY TO ENSURE SAFE OPERATION
........................................................................................................................... 8
PACKAGING ..................................................................................................... 8
MINIMUM SYSTEM REQUIREMENTS FOR THE PC-CLIENT......................... 8
1GENERAL INFORMATION.......................................................................... 9
2INSTALLATION......................................................................................... 10
2.1 HARDWARE..................................................................................................10
2.1.1 CHECK THE RS485 BEFORE STARTING.......................................................................10
2.1.2 EACH INSTRUMENT IS PROVIDED WITH THE ADDRESS PARAMETER ADR........................10
2.1.3 THE TTL OUTPUT.....................................................................................................11
2.1.4 SERIAL ADDRESS OF THE INSTRUMENTS ....................................................................11
2.1.5 TERMINATION RESISTOR AND POLARIZATION RESISTOR..............................................11
2.1.6 COMPATIBLE INSTRUMENTS......................................................................................12
2.1.6.1 PARTICULAR DEVICE SETUP......................................................................................................12
2.1.6.2 XEV MANAGEMENT .....................................................................................................................12
2.1.7 LOCAL CONNECTIVITY...............................................................................................13
2.1.7.1 LOCAL CONNECTION WITH MONITOR, MOUSE AND KEYBOARD ...........................................13
2.1.7.2 LOCAL CONNECTION THROUGH PERSONAL COMPUTER.......................................................13
2.1.8 REMOTE CONNECTION FROM A CLIENT PC.................................................................14
2.1.8.1 MODEM CONNECTION (“OR POINT TO POINT CONNECTION”)................................................14
2.1.8.2 INTRANET / ETHERNET CONNECTION.......................................................................................14
2.1.8.3 INTERNET CONNECTION ............................................................................................................15
2.2 CONFIGURATION AND ACCESS.................................................................16
2.2.1 MICROSOFT WINDOWS:POP-UP BLOCKER AND COOKIES............................................16
2.2.2 MICROSOFT WINDOWS:CACHE FILES........................................................................18
2.2.3 THIRD PART SOFTWARE AND XWEB................................................................19
2.2.4 SYSTEM CONFIGURATION .........................................................................................20
2.2.4.1 LANGUAGE...................................................................................................................................20
2.2.4.2 KEYBOARD...................................................................................................................................20
2.2.4.3 SYSTEM IDENTIFICATION...........................................................................................................20
2.2.4.4 DATE/TIME.................................................................................................................................... 20
2.2.4.5 NETWORK.....................................................................................................................................21
2.2.4.6 MODEM......................................................................................................................................... 22
2.2.4.6.1 XWEB MODEM ........................................................................................................................22
2.2.4.7 DIALUP..........................................................................................................................................22
2.2.4.8 E-MAIL CONFIGURATION ............................................................................................................23
2.2.4.9 SMS CONFIGURATION.................................................................................................................23
2.2.4.10 PRINTER....................................................................................................................................... 23
2.2.4.11 XCENTER......................................................................................................................................24
2.2.4.12 AUXILIARY RELAYS .....................................................................................................................24
2.2.4.13 REBOOTING .................................................................................................................................25
3USING THE XWEB.................................................................................... 26
3.1 SYSTEM LOG-IN...........................................................................................26
3.2 HOME PAGE.................................................................................................26
3.2.1 SYSTEM ACCESS INFORMATION AREA........................................................................27
3.2.2 TOOLTIP..................................................................................................................27
3.2.3 IDENTIFICATION /TIME..............................................................................................28
3.2.4 SERVER PROPERTY..................................................................................................28
3.2.5 ALARMS...................................................................................................................28
3.3 CONFIGURATION MENU..............................................................................28
3.3.1 DEVICE FIND OF THE INSTRUMENTS CONNECTED TO THE “RS485” SERIAL LINE............29
3.3.2 CATEGORIES ...........................................................................................................29
3.3.2.1 DEVICE TIPOLOGY.......................................................................................................................30
3.3.2.2 RECORDING INTERVAL............................................................................................................... 31
3.3.2.3 RTC SYNCHRONIZATION ............................................................................................................31

3.3.2.4 DEFROST COMMANDS................................................................................................................ 32
3.3.2.5 LIGHT COMMANDS (FOR INSTRUMENTS PROVIDED WITH THIS FUNCTION)........................32
3.3.2.6 AUX COMMAND (FOR INSTRUMENTS PROVIDED WITH THE FUNCTION) ..............................33
3.3.2.7 ENERGY SAVING COMMAND (FOR INSTRUMENTS PROVIDED WITH THE FUNCTION).........34
3.3.2.8 DEVICE STAND-BY COMMAND................................................................................................... 35
3.3.2.9 CALENDAR FUNCTION................................................................................................................36
3.3.3 SCHEDULER.............................................................................................................41
3.3.3.1 PRINTING EVENTS.......................................................................................................................42
3.3.3.2 SYSTEM EVENTS......................................................................................................................... 43
3.3.3.3 USING THE SCHEDULER.............................................................................................................45
ALARMS.................................................................................................................................46
3.3.3.4 ALARM TYPOLOGY AND ALARM LEVELS .................................................................................. 46
3.3.3.5 DESTINATION OF THE ALARM MESSAGES ...............................................................................46
3.3.3.6 ALARM LEVELS............................................................................................................................47
3.3.3.7 ALARM TYPOLOGY MANAGEMENT............................................................................................48
3.3.3.8 QUEUED MESSAGES...................................................................................................................49
3.3.4 DEVICE CONFIGURATION...........................................................................................49
3.3.4.1 SELECT A DEVICE........................................................................................................................49
3.3.4.2 ASSIGN THE DEVICE NAME........................................................................................................ 50
3.3.4.3 ASSIGN THE CATEGORY TO THE DEVICE “DEVICE CATEGORY SETUP” ...............................50
3.3.4.4 ASSIGN THE ALARM TYPOLOGY................................................................................................51
3.3.4.5 DEFINE THE DIGITAL, ANALOGUE INPUTS AND THE STATUS.................................................51
3.3.4.6 CLONE FUNCTION....................................................................................................................... 52
3.3.5 PERMISSIONS...........................................................................................................53
3.3.5.1 MANAGING THE USERS ..............................................................................................................54
3.4 DEVICES MENU............................................................................................55
3.4.1 SINGLE VIEW............................................................................................................55
3.4.1.1 PARAMETER AND SINGLE VIEW.................................................................................................57
3.4.2 RUN TIME ................................................................................................................57
3.4.3 PARAMETERS...........................................................................................................60
3.4.4 LAYOUT FUNCTION...................................................................................................62
3.4.4.1 LAYOUT EDITOR.......................................................................................................................... 62
3.4.4.2 LAYOUT VIEW...............................................................................................................................69
3.4.5 GLOBAL COMMANDS FUNCTION.................................................................................70
3.4.5.1 GLOBAL EDIT................................................................................................................................70
3.4.5.2 GLOBAL COMMANDS...................................................................................................................72
3.4.6 PERFORMANCE METER .....................................................................................72
3.4.6.1 INTERPRETING THE %COOL ......................................................................................................76
3.5 SUPERVISING MENU...................................................................................76
3.5.1 SUPERVISING (*)..................................................................................................76
3.5.1.1 THE PROJECT..............................................................................................................................76
3.5.1.2 SDC, ELS E ODC ..........................................................................................................................76
3.5.1.3 SDC...............................................................................................................................................76
3.5.1.4 ODC...............................................................................................................................................77
3.5.1.5 ELS................................................................................................................................................ 78
3.5.1.6 THE COMPLETE PROJECT..........................................................................................................79
3.5.1.7 STE LOGICAL BLOCK................................................................................................................... 80
3.5.1.8 PROJECT SIMULATION................................................................................................................80
3.5.1.9 LOCAL TEST.................................................................................................................................80
3.5.1.10 FIELD SIMULATION...................................................................................................................... 80
3.5.1.11 RUNTIME MODE...........................................................................................................................80
3.5.1.12 PROJECTS ACTIVATION..............................................................................................................80
3.5.1.13 GRAPHIC VISUALIZATION...........................................................................................................80
3.5.2 COMPRESSOR RACK OPTIMIZER (C.R.O.) (*).............................................................81
3.5.3 DEW POINT CONTROL (SUPERVISING MENU)(*)..............................................83
3.6 DATA MENU..................................................................................................84
3.6.1 DISPLAY THE GRAPHS WITH XWEB...........................................................................84
3.6.1.1 MULTI GRAPH...............................................................................................................................88
3.6.2 DISPLAY THE GRAPHS WITH LOCAL PC........................................................................88
3.7 ALARM MENU...............................................................................................95
3.7.1 HYSTORICAL ALARMS ...............................................................................................95
3.8 PRINTING MENU ..........................................................................................97
3.8.1 PRINTINGS...............................................................................................................97
3.9 TOOLS MENU...............................................................................................97
3.9.1 SELECTIVE MONITORING...................................................................................97
3.9.2 BACKUP –RESTORE .................................................................................................99
3.9.2.1 BACKUP........................................................................................................................................ 99
3.9.2.2 RESTORE....................................................................................................................................102
3.9.2.3 INCREMENTAL BACKUP............................................................................................................ 102

XWEB5000 Operation Manual
3.9.2.4 INCREMENTAL RESTORE .........................................................................................................103
3.9.3 SYSTEM MESSAGGES..............................................................................................103
3.9.3.1 MANUAL TEST: E-MAIL, FAX OR SMS SENDING...................................................................... 103
3.9.3.2 SENDING AUTOMATIC REPORTS.............................................................................................104
3.9.3.3 EXAMPLE OF REPORT: E-MAIL................................................................................................. 104
3.9.4 RS485 TEST .........................................................................................................105
3.10 INFORMATION MENU.............................................................................105
3.10.1 SYSTEM RELEASE...................................................................................................105
3.10.2 SYSTEM UPDATE ....................................................................................................106
4SAFETY / AND ALLOWED USE............................................................. 108
5APPENDIX............................................................................................... 109
Appendix A: DEVICE ADVANCED SECTION ........................................... 110
Appendix B: GLOSSARY........................................................................... 112

dIXEL
Manual de operare Xweb5000
Pag. 7 / 115
I
IN NT TR RO OD DU UC CT TI IO ON N
Congratulations! This manual will teach you everything about XWEB server, the most powerful and configurable tool
for Controlling, Monitoring, and Supervising.
This manual is a comprehensive guide to your XWEB. Reading it you will find all the information you need it to
operate.
The XWEB is based on the latest technology of the Internet world to display the WEB pages contained into the unit
itself. The Linux operative system guarantees maximum efficiency and stability support for this kind of product.
All future software releases developed by Dixell have the possibility to be downloaded through the XWEB server
connection. The hardware inside the unit, based on high performance electronic boards, does not need any
maintenance.
The different kinds of client connection are guaranteed by a variety of connection sockets capable of giving the best
solution for each kind of application.

XWEB5000 Operation Manual
8/115
1592010600
C
CA AU UT TI IO ON N: : R RE EA AD D T TH HI IS S P PA AG GE E C CA AR RE EF FU UL LL LY Y T TO O E EN NS SU UR RE E S SA AF FE E O OP PE ER RA AT TI IO ON N
P
PA AC CK KA AG GI IN NG G
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate,
notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company
without delay. Only the consignee (the person or company receiving the unit) can file a claim against
the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport
or ship the unit in the future.
Inside the box you must find these articles:
The XWEB server unit.
One power cord for power supply connection (European).
2 mounting brackets.
Quick setup manual (Fast installation).
One CD Rom containing the Operative manual and software.
If you find one of the above damaged items do not hesitate to contact your supplier.
MODEM (not included)
When working with the modem connection always check the kind of modem you are going to
install by verifying, with Dixell, the complete compatibility with the XWEB unit.
Dixell is not responsible for bad functioning of unknown or untested devices.
M
MI IN NI IM MU UM M S SY YS ST TE EM M R RE EQ QU UI IR RE EM ME EN NT TS S F FO OR R T TH HE E P PC C- -C CL LI IE EN NT T
Connecting a local monitor, mouse and keyboard the user can execute any kind of operation allowed
by the XWEB server unit.
When connecting through the LAN, the PC client computer, must have installed these components:
Windows 98or higher
Pentium II 300MHz with 64 Mb-ram or higher
Java Virtual Machine
Explorer 5.5 or higher
If necessary, inside the CDROM you will find the Java Virtual Machine program distributed by Sun
Microsystems.
Dixell S.p.a.. is not responsible for any kind of damage occurring after the loading of the Java Virtual
Machine program into the user‟s PC.

dIXEL
Manual de operare Xweb5000
Pag. 9 / 115
1
1 G GE EN NE ER RA AL L I IN NF FO OR RM MA AT TI IO ON N
XWEB is a Controlling, Monitoring and Supervising system based on “WEB server” technology. It is capable to
communicate data to one or many external Clients with the same kind of procedure used by the Internet Web
Sites. Clients need only a standard Browser such as Microsoft Exploreror Netscape.
The XWEB server is mounted inside a 19” rack. On the back side, it is provided with the terminal connections
for external devices (modem, printer etc.).
The Web Pages with all the information are contained into the server itself; Linux operative system ensures
maximum efficiency and security.
The server reads logs and checks the data coming from the Dixell instruments connected to a RS485 line. The
communication protocol is the Modbus-RTU. The XWEB is capable of recognising also most of the Modbus-
Rtu compatible instruments not manufactured by Dixell.
ATTENTION: Always check the proper RS485 connections (see 2.1.1Check the rs485 before starting)
ATTENTION: Dixell S.p.a.. reserves itself the right to analyse the Modbus-RTU compatibility of other
manufacturer‟s devices before ensuring their integration into XWEB system.
Clients to Server connection possibility:
Local: directly on the XWEB hardware, plugging in Monitor, Mouse and the Keyboard.
Modem: point to point through local and remote modem devices (“Creating a Remote Access under
Windows”);
Intranet / Internet: where available a static IP, using the standard socket 10 Base-T with RJ45 connector.
Bridge network cable: You can plug a bridge network cable into RJ45 socket of XWEB and on the other
side into your PC network adapter. Ask your network administrator to properly setup your PC to be able to
access XWEB web pages.
The User interface is defined by the Browser program and it is the same for all kind of connections.
The PC-client needs only a standard Browser, there is no need to install any kind of software
Some of the pages created by the web server are dynamics and needs the Java Virtual Machine program that
is normally installed in the latest Browsers and operative systems.
Check the different connection under “§2.1.7 Local connectivity”.
Features and functions included into the XWEB management:
Data monitoring and recording, alarm detection and recording of the instrument connected.
Alarm management defined by the User with visible signals, and remote transmission via Fax, E-mail and
sms.
Interactive commands to work with the connected instruments.
“Run Time” function to show in real time all the information coming from the instruments.
Parameter table programming.
Graphic or table viewing and printing of the recorded data.
Other service functions.

XWEB5000 Operation Manual
10/115
1592010600
2
2 I IN NS ST TA AL LL LA AT TI IO ON N
2.1 HARDWARE
ATTENTION: to protect both yourself and the computer from electrical hazards the XWEB should remain
turned off until you are finished connecting all electrical devices to the unit.
To avoid accidental start of the unit, remember to plug in electrical cable only when you have finished
setting up all other connection.
2.1.1 CHECK THE RS485 BEFORE STARTING
To be connected to the serial line all the Dixell Modbus instruments must be provided with direct RS485
terminals or the “TTL”-RS485 interface (XJRS485 or XJ485). Check the controller‟s manual for more
information.
The RS485 line is mainly based on two polarised terminals. Please make sure that respect the right sequence
for all the devices connected to the serial line.
Follow these important advises:
The RS485 serial line must reach all the instruments where they are installed.
Beware to the wire polarities when screwing them into the instrument terminals.
2.1.2 EACH INSTRUMENT IS PROVIDED WITH THE ADDRESS PARAMETER ADR
The cable must have 2 or 3 wires with shield, minimum section 0,5mm2(eg. the BELDEN 8772).
From the XWEB position the cable reaches all the instrument positions.
Do not execute loops or derivations:
Right connection
Wrong connection

dIXEL
Manual de operare Xweb5000
Pag. 11 / 115
Always keep the serial cable away from power cables.
Always keep the serial cable away from electro-magnetic or frequency sources.
Do not connect shield to ground.
Do not connect the “Gnd” terminal.
Remember to draw a map of the line. This will help you to find an error if something is wrong.
The instrument with RS485 have “+” and “-“ terminals, respect the polarity.
To keep the line balanced it is necessary a 100 Ohm resistor at the end of the line (you ca use the RS
485+ and RS 485- terminals of the last instrument connected).
2.1.3 THE TTL OUTPUT
The instrument with RS485 on board does not need any kind of external interface module.
For instruments with external interface: keep the TTL cable away from power cables or frequency sources.
The XJ485 external interface must be connected with TTL cable to the instrument with TTL compatibility.
2.1.4 SERIAL ADDRESS OF THE INSTRUMENTS
Each instrument must be defined by its unique address.
Check the address into the Adr parameter value. Take reference to the instruction manual of the
instrument itself to find the right procedure to enter the programming and set the value.
The easiest way to work with the category functions is to set the addresses progressively for similar
groups of instruments which have the same application.
2.1.5 TERMINATION RESISTOR AND POLARIZATION RESISTOR
To keep balanced the RS485 the beginning and the end of line must be closed with a resistor of 120Ω.
If XWEB is placed at the beginning or at the end of the line, please active its termination resistor by
adding a jumper in position 3 (JMP3 on the back side of the unit). DO NOT add the jumper if XWEB is
placed in the middle of the RS485 line.
If in the setup there are NOT Dixell‟s controllers and you are experiencing communication problems,
please add the polarization resistors by adding a jumper in position 1 and 2 (JMP1 and JMP2 on the
back side of the unit).

XWEB5000 Operation Manual
12/115
1592010600
2.1.6 COMPATIBLE INSTRUMENTS
For a more complete list please read Appendix D.
2.1.6.1 PARTICULAR DEVICE SETUP
All controllers equipped with 2 serial addresses (XC400/600/800/900, XH200/300/400 etc.) must be used
with both addresses equal.
iCHILLs need to activate a particular value in the “Advanced” section. User must check “Force Device On
status”. Remember to stop-start acquisition after this operation.
To use non Dixell, but modBus compatible controllers (such as Energy Analyzer by Carlo Gavazzi) follow
this instructions:
a) Go to “Devices” and choose a controller.
b) Push “Add”. A new controller on the same address will be added.
c) Modify the serial address to match the one of the new controller. Push “Confirm”.
d) Go to “Advanced” and with “Model” menu select the correct model. To complete the previous example,
to insert Energy Analyzer “WM22-DIN-AV5” choose “ENERG.ANAL”.
e) Check “ Force Device On status” and all the other categories needed such as “Device Type” and
“Sampling”. Push “Update”.
2.1.6.2 XEV MANAGEMENT
The XEV driver for the electronic expansion valve On/Off can be linked together with a controller.
a) Enter the programming mode of the XEV and set Mod=AdU
b) Set the Adr to the same value of the controller the XEV is linked to.
c) Make a “device find” on the XWEB, only the controllers will be added to the setup. XEV will not be available
during this phase.
d) Enter devices and pick up the first device that has been linked to the. Go to Advanced section and make a
model change according to the following chart:
DEVICE
XEV
MODEL TO USE
XM463 ver. 0.2
XEV ver.0.3
XM463K+XEV (0.2+0.3)
XM466 ver. 1.2
XEV ver.0.3
XM466+XEV (1.2+0.3)
XR570D ver. 2.0
XEV ver.0.3
XR570D+XEV (2.0+0.3)
Press confirm (see APPENDIX: ADVANCED SECTION).
e) If you must add more than 1 controller, you can use the clone function. Go to device, then press “Clone”.
The function starts, a pop-up appears, press “cancel”. This function will assign the model you have just setup
to all the others that are present in the setup.

dIXEL
Manual de operare Xweb5000
Pag. 13 / 115
WARNING: this procedure, if the user makes a mistake, overwrites the existing model of the selected devices
with a new model that is NOT compatible.
2.1.7 LOCAL CONNECTIVITY
2.1.7.1 LOCAL CONNECTION WITH MONITOR, MOUSE AND KEYBOARD
On the back side, the XWEB is provided with the sockets for a monitor, a mouse and a keyboard. Please
connect all the peripherals before powering-on the unit otherwise the system may fails to recognise them. This
means that , for example, if you do not plug the monitor cable now, you won‟t see anything displayed on it.
The unit can also work without these three elements therefore if the user intend to work just with the remote,
he can definitively remove them after the setup operations.
In any case inside XWEB is loaded a standard browser to allow the user setting up the unit.
If necessary check the instructions manual of each device connected to the unit.
The operative procedure to work with XWEB is the same for all connection method.
2.1.7.2 LOCAL CONNECTION THROUGH PERSONAL COMPUTER
It is possible to use the local connection with a single PC, provided with LAN card, by using the net connector
RJ 45 (LAN). Due to the PC-client power, this kind of connection is more suitable for the setup procedures.
Remember that the PC must be provided with internal or external LAN card adapter.
IMPORTANT: the cable between the Server and the PC must be with crossing wires (“Bridge Cable”).The
connection procedure from the remote PC is made simply by launching the Browser program and inserting the
default address of the XWEB unit http://192.168.0.200. Proper information about setting up a network
connection for the client PC, can be found inside the INSTALLATION MANUAL on §4.1.

XWEB5000 Operation Manual
14/115
1592010600
2.1.8 REMOTE CONNECTION FROM A CLIENT PC
2.1.8.1 MODEM CONNECTION (“OR POINT TO POINT CONNECTION”)
It represents the most common method where the LAN (intranet / Ethernet / internet) is not available.
It is strongly advised to use a dedicated telephone line.
IMPORTANT: Use exclusively modem devices approved by Dixell.
Remember that many modems are not compatible with Linux. The list of compatible models can be
found under the menu: Configuration –System - Modem. In appendix E, you can find the complete
list of accessories together with their commercial name. Dixell can provide you these modems. You can
decide to buy them in your country, but do not use different models from the ones stated here. Dixell is not
responsible for any action depending on a modem that is not present in the official list of supported
accessories.
USB Modem (recommended).
Connect the USB Modem to the USB Port on the back side using the modem cable commonly included into
the modem packaging itself.
There is no need to give power supply to the modem because the Server provides it through the USB port.
The modem reset is directly controlled by the XWEB Server through the USB port by turning off and then on
the modem device.
Connect the modem to the telephone line with the phone cable included into the modem packaging.
Remember to check if there is a switching machine.
The connection procedure is divided in two parts:
In the first part it is necessary to create the Remote Access, in your remote PC, set with the telephone number
of the line where the XWEB is connected to. You have to use Dixell as Username and Password.
The second is the procedure you will ever use: after launching the new Remote Access that will engage the
line through the modem, start the Browser from your PC and insert the address http://192.168.1.200 into
Explorer/Netscape address bar. Proper information about setting up a dial-up connection for the client PC, can
be found inside the INSTALLATION MANUAL on §5.1.
2.1.8.2 INTRANET / ETHERNET CONNECTION
The Intranet or Ethernet connection should be initially managed by the net administrator which will assign one
free IP address to reach the Server. This number is an example of what you should expect:
http://192.168.000.111.
After receiving the address from your network Administrator the XWEB must be set with this number.
REMEMBER: A setup wizard will guide you through the procedure. Please ensure you have an IP address to
use in network section.
Use a standard RJ45 network cable to connect the unit to your lan.
The Intranet method allows the connection to interact with XWEB from all the PC Clients. Insert the net
address assigned by the administrator into the Browser address bar. Bookmark the address with personalised

dIXEL
Manual de operare Xweb5000
Pag. 15 / 115
name for the future connections.
2.1.8.3 INTERNET CONNECTION
It is necessary a STATIC IP address for the XWEB which is normally assigned by the Provider of your internet
services (ISP net).
The Internet connection allows XWEB to be reached from all PC-clients. Insert the net address assigned by
the administrator into the Browser address bar. Bookmark the address with personalised name for the future
connections.
Ask your provider for more details about the rent of a the static IP.
This the internet system requirements for the best result:
Wide band connection.
At least 1 static IP addresses for the XWEB.
The internet connection is established through a device called Router that receives and sends the data as
interface between an Intranet and Internet. The Provider also assigns the address of the router that is called
IP WAN.
Remember that the default value of the IP of the XWEB is: 192.168.0.200.
Depending on the contract the Provider can also supply the router, otherwise the user can buy it separately.
REMEMBER: ask qualified personnel for the router installation by using this information:
Used ports that are mapped to the LAN side:
80 (used for the http:// access)
22 (used for SSH connection)
The above ports are all related to the XWEB IP address 192.168.0.200.
While the ports on the WAN side are:
Telnet (to configure the router from a remote, also via Internet)
http (To access the XWEB)
If working with the router GATEWAY and DNS check your Internet contract details.

XWEB5000 Operation Manual
16/115
1592010600
2.2 CONFIGURATION AND ACCESS
Before turning on the XWE5000 read these notes.
The User interface is the same for all kinds of connections; therefore it does not matter if you are a Local,
Local PC, Intranet client for the setup operations.
The local access with PC is the fastest way to work with. Be sure the Pc-clients are provided with Java
Virtual Machine. Launch the Browser and insert the default address 192.168.0.200. Ask your network
administrator to avoid IP number conflicts.
2.2.1 MICROSOFT WINDOWS: POP-UP BLOCKER AND COOKIES
XWEB uses some pop-up windows to show the user the real status of each operation, unfortunately these
pop-ups are blocked by Windows pop-up blocker. Usually Windows add a pale yellow bar to inform you about
the blocked pop-up (image below).
To avoid this problem, please follow these rules:

dIXEL
Manual de operare Xweb5000
Pag. 17 / 115
1. Go to “Tools” and then “Internet Options…”:
2. From the TAB “Privacy”, apply the “Default” settings and press the button “Settings…” on the bottom
right corner.

XWEB5000 Operation Manual
18/115
1592010600
3. Add the default address of XWEB, i.e: 192.168.0.200.
Please remember to add each IP address you will use to this list.
2.2.2 MICROSOFT WINDOWS: CACHE FILES
Often referred to as the cache, the Temporary Internet Files folder contains a kind of travel record of the items
you have seen, or downloaded from the Web, including images, sounds, Web pages, even cookies. Typically
these items are stored in the Temporary Internet Files folder.
Storing these files in your cache can make browsing the Web faster because it usually takes your computer
less time to display a Web page when it can call up some of the page's elements or even the entire page from
your local Temporary Internet Files folder, but at the same time can prevent you from receiving correct
information from the XWEB you are connect to.
These files also take up space, so we suggest deleting them periodically. When you clear out the files stored
in your cache you go through the “clearing the cache” procedure.
To clear your cache:
1.
On the Internet Explorer Tools menu, click Internet Options. The Internet Options box should open to the
General tab.
2.
On the General tab, in the Temporary Internet Files section, click the Delete Files button. This will delete all
the files that are currently stored in your cache.

dIXEL
Manual de operare Xweb5000
Pag. 19 / 115
2.2.3 THIRD PART SOFTWARE AND XWEB
As general rule please remember that software such as antivirus programs, firewall programs, toolbars (Yahoo
and Google bar) may prevent you from connecting properly to XWEB. We strongly suggest to check these
softwares setup and add the IP address of XWEB to the trusted site list of your software. As far as firewall is
concerned, add port 80 and port 22 to the allowed ports forwarding, of course all the TCP/IP requests coming
from the IP address of XWEB must be allowed.

XWEB5000 Operation Manual
20/115
1592010600
2.2.4 SYSTEM CONFIGURATION
After the first loading of the operative system, you are required to setup the unit by using a Wizard program.
This wizard will appear only during the very first power-on of the unit.
Before proceeding please notice that in the right side of the fields that you will see during setup procedure
there is a question mark. By clicking on it a pop-up windows with a contextual help will appear.
The first windows ask you to choose your language and keyboard layout:
2.2.4.1 LANGUAGE
2.2.4.2 KEYBOARD
Choose the keyboard layout, this setup will load the correct font name for the graphical user interface
2.2.4.3 SYSTEM IDENTIFICATION
Now choose a proper name for the unit. You can use two data fields: “System name” and “System
description”. We strongly suggest that you always use the same criteria. This will help you manage more than
one XWEB. It is possible to load a custom log in the Home-Page. Supported file format are: JPG, GIF e PNG.
The logo file is: 600 pixels width per 50 pixel high. Maximum file size is 150KB.
2.2.4.4 DATE/TIME
The on/off button is on the back of the unit.
POWER ON: press and release the button, the system will be
switched on. For few minutes the Server starts loading the operative
system, the local monitor shows the loading messages of each
system while the HDD (hard disk) LED is blinking.
POWER OFF: With system ON, press and release the button. You‟ll
hear a beep from internal speaker and the system will be switched
off. For few seconds the HDD (hard disk) LED is blinking and it‟ll be
switched OFF when the system will be OFF.
If the POWER OFF procedure doesn‟t work, there is the possibility to
switch off immediately the system by pressing and holding the
ON/OFF button. This procedure has not to be used during normal
functioning.