Dolphin PROX 2 Gyro User manual

Dolphin PROX 2 Gyro Pool Cleaner
8151616
EN
FR
ES
Operating Instructions
Dolphin PROX 2 Gyro Pool Cleaner........................
Instructions d’opération
Dolphin PROX 2 Gyro nettoyeur de piscine...........
Instrucciones de manejo
Dolphin PROX 2 Gyro de piscinas..........................
p. 1-10
p. 11-20
p. 21-30
by

Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
1
Contents
1. INTRODUCTION .............................................................................2
2. SPECIFICATIONS ............................................................................2
3. WARNINGS AND CAUTIONS........................................................2
3.1. Warnings................................................................................2
3.2. Cautions.................................................................................2
4. POOL CLEANER PARTS..................................................................3
5. USING THE POOL CLEANER.........................................................4
5.1. Setup......................................................................................4
5.2. Putting the Pool Cleaner into the pool...............................5
5.3. Removing the Pool Cleaner from the pool.........................5
5.4. Maintenance..........................................................................6
5.5. Off-season storage ...............................................................7
6. POWER SUPPLY...............................................................................8
7. REMOTE CONTROL UNIT ............................................................9
CADDY ASSEMBLY .............................................................................31
Dolphin PROX 2 Gyro Robotic Pool Cleaner
Operating Instructions
EN

2
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
EN
EN
Dolphin PROX 2 Gyro Pool Cleaner
Operating Instructions
1. INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long lasting
performance and easy maintenance.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 2.6ft/0.80m
Maximum depth: 16.4ft/5m
3. WARNINGS AND CAUTIONS
3.1. Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
• Keep the power supply out of standing water
• Position the power supply at least 10ft/3m away from the edge of the pool
• Do not enter the pool while the pool cleaner is working
• Unplug the power supply before servicing
3.2. Cautions
When not in use store the Pool Cleaner on the caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine Max 4 ppm
pH 7.0 - 7.8
Temperature 43-93°F /6-34°C
NaCl Maximum = 5000 ppm
CAUTION

Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
3
EN
EN
Bottom lid and filter Bag
caddy
Power Supply
Unit
Remote Control Unit
Dolphin
PROX 2 Gyro
Wonder Brush
For smooth ceramics
(optional)
Combined Brush
For rough ceramics
Surface and mosiac tiles
Filter bag options:
Fine - default
Ultra fine - extra
4. POOL CLEANER PARTS

4
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
EN
EN
Change diagonal handle position for
water line sideway movement.
To adjust the handle angle:
A. Press the latch down and hold it
in position.
B. Move the handle to the desired
position and release the latch to
hold the handle in place.
GFI/ELI
40°C Max
104°F Max
B
A
A
3
4
1
2
B
5. USING THE POOL CLEANER
5.1. Set Up

Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
5
EN
EN
Turn the power supply ON
ON
OFF
5.2. Putting the Pool Cleaner into the pool
5.3. Removing the Pool Cleaner from the pool
The robot will perform automatic shut-off at the end
of the cleaning cycle.
Turn Off and unplug the power supply
CAUTION
If Wonder brush/ Wonder rings are dry, soak
them in water until soft
Shake the robot from side to side or turn it
upside down to release trapped air.
Let it sink to the pool floor.

6
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
EN
EN
Using the floating cable, bring the Pool Cleaner to the pool’s edge.
Clean the filter bag with a hose.
Periodically clean the brushes with a hose.
It is recommended to periodically wash
the filter bag in a washing machine.
Use gentle cycle program.
CAUTION
5.4. Maintenance
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE

Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
7
EN
EN
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun
If you notice debris
trapped in the
impeller open
the impeller and
remove the debris.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
• Make sure that no water is left in the pool cleaner
• Thoroughly clean the filter bag and insert in place
• Roll up the cable so that it has no kinks and place
on the caddy
• Store the pool cleaner in a protected area either
on its caddy or simply upsidedown
5.5. Off-season storage
Cleaning the impeller
Unplug the power supply
Cable

8
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
EN
EN
Full filter bag indicator and Reset button
The power supply is equipped with a filter bag status indicator.
The red LED indicates two filter conditions.
• When blinking - The filter is partially blocked.
• When lighted - The filter is blocked and must be emptied and cleaned.
If the LED does not turn off after the filter bag had been emptied and cleaned, press the RESET button
while the robot is working.
Delay indicator
The power supply is equipped with a Delay indicator that indicates if the Delay option is activated
(through the remote control unit).
•Input-100-250ACVolts
•50-60Hertz
•180Watt
•Output-<30VDC
•IP54
On/Off switch Reset button
Delay indicator
Full filter bag indicator
<30VDC;IP54
<30VDC;IP54
Digital “Switch-Mode” Power Supply with full filter bag and delay indicator.
6. POWER SUPPLY