Doosl W13-M User manual
Doosl Mini Video Projector
User Manual
W13-M
1. Do not look directly into the projector light.
2. Don't touch the project lens.
3. Mains adapter is used as disconnect device and it should
remain readily operable during ntended use. In order to discon-
nect the apparatus from the mains completely, the mains plug
should be disconnected from the mains socket outlet completely.
4. Use of controls or adjustments or performance of procedures
other than those specified may result in hazardous radiation
exposure.
5. Changes or modified to this unit not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
6. Use of this unit near fluorescent lighting may cause interfer-
ence regarding use of the remote. If the unit is displaying erratic
behavior move away from any fluorescent lighting, as it may be
the cause.
7. Shock hazard - Do Not Open.
8. Caution and marking information is located at the rear or
bottom of the apparatus.
9. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain, moisture, dripping, or splashing.
10. Objects filled with liquids, such as vases, shall not be placed
on the apparatus.
WARNINGS
1
PRODUCT OVERVIEW
2
On/of
Arrow Keys
Ok
Model
ʒ
ʓ
ʔ
ʕ
Set Up
Return
Focusing Ring
Keystone Correction
ʖ
ʗ
ʘ
ʙ
ʒ
ʓ
ʔ
ʕ
ʖ
ʗ
ʘ
ʙ
ʓ
ʓ
DC Power Socket
PRODUCT OVERVIEW
3
ʚ
ʚ
ʛ
USB1
HDMI Port
ʛAV
3.5mm Headphone Jack
Power
Forward
Backward
Move Left
Input Source
Menu
Return
Volume Down Volume Up
Move Right Move Up Move Down
Play/Pause
Mute
1. Connect the projector to the DC power adapter,then turn
on the power supply of the adapter, the power indicator light
of the body will be on, and the projector will enter the standby
state.
2. Start: Press the “ ” button on the projector or the remote
control.
4
REMOTE CONTROL
STARTING PROJECTOR
CONNECTING
In different angel you put the projector, the projection will
Deformation like a trapezoid,use the keystone correction to
make it correctly.
Focusing Ring
Keystone Correction
Keystone Correction
5
Press " " of the remote control, enter signal source menu. Use
the arrow keys " " and the "OK" to select the signal source.
Select "Wireless" to choose your
home wireless network.
Enter the password to connect.
The name of your home wireless
network will appear in the upper
right coner of the projectionscreen
after the projector connects with it
successfully. If not, please check
your password.
Airpaly Miracast Network
settings
Network On
Network Off Wireless
SSID None
Status Enable
IP Address 0.0.0.0
MAC Address 94-A4-08-A0-10-74
Network Information
Connected To...
SSID ChinaNet-JvA9
Mode None
Password
Connected Manual IP Settings
Airpaly Miracast Network
settings
W13-M
6
1. Wifi Wireless Connection for IOS
and Android device
Click "Signal source " on the
remote control, select "MCAST
>Network settings "
If you use an IOS device, please
choose "Airplay ", and then
wait for the device connection.
If you use an Android device,
please choose "Miracast ",
and wait for the device
connection.
Airpaly Miracast Network
settings
W13-M
6FUHHQ0LUUHULQJ 6FUHHQ0LUUHULQJ
0DUVE\WH;;;;
!
"#!$
%
& '()
*+,( & !
'!
" !,!
% -
Airpaly
Miracast Network
settings
W13-M
7
For Android device, slide the phone interface from the
up to bottom to enter the control center, then click on
"WirelessProjection" /"Multi-screen" /"Screen sharing",
(Different mobile phone models
for different expressions)
Make sure that your IOS/Android
device connect with the same
network your projector.
W13-M
8
For IOS device, open Control
Center and tap Screen
Mirroring .
What devices can use the wireless
connection?
1. IOS devices are only suitable for iPhone, and Ipad;
2. Android devices are only suitable for smartphones, and
tablets;
3. Not suitable for any laptop.
Looking for devices that can be
mirrored on. Waiting for the
connection.Select W13-M
on the list.
9
Operation on the projector
Signal source >MCAST >Network settings >Wire-
less> Connect the WIFI>Select Airplay (IOS) /Select
Miracast (Android)
Operation on the IOS/ Android device connects with same
WIFI>Control Center>Screen Mirroing >Waiting
connection> Select W13-M
2. Connect HDMI Devices
Using the HDMI cable in the package to connect with projector.
(HDMI connection is recommended for projecting movies,
videos, and other files which need to be HD.)
Add:Different brand laptop output
keys are as follows:
Fujitsu
Haier
NEC
Panasonic
Sharp
Hitachi
TOSHIBA
Lenovo Fn+F3
Fn+F8
Fn+F4
Fn+F7
Fn+F8
Fn+F5
Fn+F4
Fn+F7
Fn+F10
Fn+F3
Fn+F3
Fn+F3
Fn+F5
Fn+F7
Fn+F5
Dell
HP
ThinkPad
Asus
Acer
Samsung
Sony
10
Turn on your laptop and the projector.
Connect the HDMI cable to your laptop's HDMI port.
Connect the other end to any available HDMI port on your
projector.
Press " " of remote control to enter the interface of Input
Source.
Select HDMI source to project any files on your computer.
On your laptop, hold down the key"WIN+P" board keys to
change your display mode, select "Duplicate".
1
2
3
4
5
6
3. Connect Smartphone
For IOS devices
By using a lightning to HDMI/USB adapter(lighting to HDMI
cable adapter), you can connect your iOS device to this
projector easily(NOT INCLUDE ADAPTER)
For Android devices
This projector allows you connect to your Android mobile-
phone with micro USB /type C to HDMI/USB(NOT
INCLUDE ADAPTER)
The user of windows 7 or over windows 7. Simply press the
+P, select “Duplicate” to connect. If the operation above
is invalid, Please update the computer graphics driver.
Micro USB to HDMI adapter
Lightning to HDMI a dapter
11
Note:
1. Please kindly note that the adapter was not included in
the package.
2. Please also make sure to choose HDMI as the input
source after connection.
3. Because there are different versions of Micro USB/
Type C / Lighting to HDMI adapter cable and different
models of smartphones, the Micro USB/Type C / Lighting
to HDMI adapter cable may not be compatible with your
smartphone, and there is a problem that it cannot be
connected. Has nothing to do with the projector,you can
try another adapter cable.
4. All Micro USB/Type C / Lighting to HDMI cable in the
market cannot support mobile phones to play NETFLIX,
hulu,amazon prime video projection, which has nothing to
dowith the projector.
Last but not least this projector does not support Dolby-
sound. So there will be no sound when you play Dolby sound
videos, (Amazon fire stick, Netfix, Blue ray movies and soon).
In this case, please kindly turn off the Dolby sound on your
device or apps.
The indtruction for your reference to turn off the Dolby
sound (Settings > Display & Sounds > Audio > Dolby
Digital Output > surround sound (OFF)
12
4. Connect the USB Drive
Different from other devices, when you connect a USB
drive, directly select the file you want to play on the main
menu.
To play a video stored in a USB drive, select "Movie"
on the main menu, and press the "OK".
To play a picture, music stored in a USB drive, select
"Photo"/ "Music" on the main menu, and press the "OK".
Note:
The chip of this projector is not compatible with files stored
in a USB stick in PPT format. (If you want to play PPT,
please store the PPT document on your laptop or DVD
player, then connect this projector to them).
6. Connect 3.5mm Audio Devices
Support 3.5mm earphones and other cable sound devices.
13
1
2
5. Connect AV Video Devices
Use the 3 in 1video cable （Included in the package）
to connect with AV.
Choose the media signal channel: "AV".
1
2
3
1.PROJECTION SETTINGS
1. Click "Menu" of the projector remote control or " " of
the projector, enter the setting menu.
2. "PICTURE"/" SOUND"/" TIME"/" OPTION" can be set
manually. After you select the properties (PICTURE/-
SOUND/TIME/OPTION) you want to set, please press "<"
or ">"on the operation panel to select the setting range of
the properties.
14
PROJECTOR SETTING
2. OPTIONS RELATED TO “PICTURE”
ARE SET ON THIS SCREEN
Picture Mode Standard, Soft, User, Vivid
Medium, Warm, User, Cool
Auto/ 4:3/ 16:9
Front/Rear on Desk, Front/
Rear on Ceiling
HDMI Mode PC/AV
75%-100%
Color Temperature
Aspect Ratio
Noise Reduction Off,Low,Middle,High,Default
Projection Direction
HDMI Mode
Reduce display size
Switch among the image mode
Switch among the color temperature mode
Set up the aspect ratio of the image
Set up the intensity of noise reduction
Set up the projection mode
Set up the HDMI mode
Reduce the projection size
FUNCTIONPICTURE MENU MODE
15
3.OPTIONS RELATED TO "SOUND" ARE
SET ON THIS SCREEN
FUNCTION
PICTURE MENU MODE
User, Standard, Music,
Movie, Sports
-50~50
On, Off
Set up the sound mode
Balance the sound ofthe left
and right channel of the speaker
ntelligently adjust volume
Sound Mode
Balance
Auto Volume
16
5. OPTIONS RELATED TO "OPTION"
ARE SET ONTHIS SCREEN
4. OPTIONS RELATED TO "TIME" ARE
SET ON THIS SCREEN
Off/10min/20/min/30/min,etc Shut off the projector after a set
amount of time
Sleep Timer
17
1. Why is the audio of the projector available but without
display?
The video format is not supported by the projector.
Encryption applied to the videos or media player which holds
the video.
If the lamp of the projector is off with only audio playing, the
lamp is defective. Please contact Amazon Seller Support for a
replacement.
Try another HDMI cable if you select the HDMI input source.
Problems listed below might occur during the operation of
your projector. Please refer to the possible factors which
might cause the issue to do troubleshooting.
OSD Language English, France, Italian,
Spanish, etc.
Off, Low, Middle, High
Update Software
Restore Factory Default
Blending
OSD Duration Off, 5Sec, 10Sec, 15Sec
Software Update(USB)
SSet up the language
displayed in the operation
Reset the projector
Adjust the transparency
of menu interface
Adjust the duration of
keeping the menu interface
Update the projector's
software version
FUNCTIONOPTION MENU MODE
18
TROUBLESHOOTING
Table of contents
