Dr.Prepare DP-1SL01-US User manual

3-IN-1 WIRELESS LED
STARRY SKY
PROJECTOR LIGHT
Manual
Do not point the light directly to people’ s eyes and keep this appliance away from
children.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USE
SKU:DP-1SL01-US
Please read this user manual carefully before the first use and save it for future
reference.
Make sure that all essential parts are contained in the package.
Basic safety tips must always be observed when using electric appliances to avoid
risks of fire, electric shocks, and physical injuries.
This appliance is intended for indoor use ONLY. Do not leave it exposed to the
weather (sun, rain, etc.).
If the appliance is damaged, do not assemble or disassemble the appliance on your
own. Contact customer service for assistance.
Read this user manual carefully and save it for future reference.
Please charge the starry projector light before the first use. For any other questions or
concerns, please find the contact information in the CUSTOMER SUPPORT part and
reach out to us.
1. Power & Light Mode Button
2. Light Mode Button (for Sky and Moon Light)
3. Music Mode Button
4. USB Port
5. Power Indicator
The manufacturer cannot be held responsible for eventual damage caused by
inappropriate, improper, or irresponsible use and/or for repairs made to the product by
unauthorized personnel.
IDENTIFYING PARTS
1 2 3
4
5

WARRANTY
CUSTOMER SUPPORT
OPERATION
Dr.Prepare products are covered by a 12-month limited warranty from the original
purchase date. If any problems occur, please contact our support team.
If you have any questions or concerns, please send us an email at
[email protected]
We only provide after-sales services for products that are sold by Dr.Prepare or retailers
and distributors authorized by Dr.Prepare. If you have purchased your unit from other
channels, please contact your seller for more information about return and warranty.
Press the Power Button (1) to turn on the projector. When the light is on, you can
short press this button a few times to switch among 5 lighting modes.
1.
CHARGE YOUR PROJECTOR
SPECIFICATIONS
NOTE
Use the included plug (5V / 1A) and the USB cable to charge this unit. A full charge
takes about 3-4 hours.
1.
When the unit is being recharged, the power indicator turns red. If the power indicator
turns green, this means that the unit is fully charged.
2.
We advise you to press buttons using your thumb to ensure accuracy.
1.
Please recharge the projector in time when you notice that the light is dimmed, battery
drains, or the unit shuts off suddenly.
2.
On a full charge, the projector can work for 2-3 hours with its built-in 2000mAh
rechargeable battery.
3.
To turn off the power button, short press the Power Button six times. Or you can press
and hold this button to turn the light off.
2.
Short press the Light Mode Button (2) and you can change the light effects of the Sky
Light and the Moon Light specifically.
3.
Short press the Music Mode Button (3) to activate the music mode. All the lights sync
with ambient music. The light effects change accordingly to the rhythm and the beat.
To disenable the music mode, short press the Music Mode Button again.
4.
This projector comes with a tilt angle of 80 degrees. By rolling the projector, you can
find a perfect tilt to project light on your wall or ceilings.
5.
Power
Input
Battery
Battery life
Recharge time
7.5W
100-240V AC~50/60Hz, 1.5A
1 x 2000mAh lithium battery
approx. 2-3 hours
approx. 3-4 hours