
Rev EE/eAmp-Power_INSTR 04/2007 1/5
Installation Instr ction
eAmp-Power/EE515PWA
PA Amplifier with DC Power Supply
WWW.EESGI.COM (Part No: EE-EE515PWA)
497 Santa Anita Ave. Temple City, CA 917 0 Phone Number: 1- 77-579-3 9 Fax Number: (626) 452-9194 eMail: info@eesgi.com
. .
1
EE515PWA
MIC IN
LINE IN 1
LINE IN 2
AC/DC BAT AUX SPK
Main Vol me Control
+ - + - - +
The versatile eAmp-Power is a DC power s pply combined with 15/35W PA
Ampflier. It is designed for stand alone operation s ch as PA/BACKGROUND
MUSIC, PHONE/PAGING and ANNUNCIATION SYSTEM (FIG1) and it also
interfaces well with o r eVoxcon/EE50 VIF or Voxbox/EE51 voice mod le
for enhancement f nctions (FIG2). Before powering the system on, make
s re all wiring and devices connection are correct, also s ggest the main
vol me control sho ld be t ned down to minim m level. Refer to (FIG3) for
speaker settings and to (FIG4) for m ltiple commercial applications.
+ -
110V AC
14-19V AC /40VA+
or
12-24V DC/2A+ 12V DC
4-7AHRS Battery
13V DC/1.5A Other Devices
(EE508VIF, EE532EXP, EE518 etc)
4Ω-250Ω
Speaker
( FIG 3 )
( FIG 1 )
-
+
MIC V-CTL
Line 1
V-CTL
Line 2
V-CTL
Specification
Power Supply
Power So rce: DC: 12 – 24 VDC,
AC: 14 – 18 VAC
AUX O tp t Voltage: 13.5 VDC
AUX O tp t C rrent: 1.5A
Battery Charger: 13.5 VDC 50~300mA
Audio PA AMP
Operating Voltage: 12 – 24 VDC
C rrent: 60 mA Standby 800 mA Operate
MIC Inp t: 1K / 100 mV
Line-in Impedance (2): 600 ohm / 0.5V+
Freq ency Response 30Hz ~ 30kHz
Speaker O tp t: 15W / 8 ohm 30W / 4 ohm
Dimension: 2" X 3" X 0.75"
LEDs Indication: G - External power so rce engage
Y - Low battery in charging
Y
G