EFB Elektronik GmbH 53719.1 User manual
07.06.13
27.08.13
MN
BT
Universal DIN-Rail Holder
19“ / 4U
53719.1
53719_1_ENG
•ForcarryingDIN-railcomponents
•ComplieswithDINEN60715TH35(35x7.5mm)
•WidthofDIN-rail435mm
•DIN-raildepth-adjustablecontiniouslyfromca.55..165mm
•Rear-sidedC-railforcablexing,height-adjustable
•DIN-railmountablealsohorizontally
•Alsosuitableforwallandceilingmounting
19“ 4U Universal DIN-Rail Holder
for vertically, horizontally, wall- and ceiling mounting
TheuniversalDIN-railholdercanbemountedverticallyorhorizontallyaccordingtotheapplicationandissuitablealsoforwallorceilingmounting.
TheDIN-railisdepth-adjustable,the19“4Umountingbracketsarepre-assembledandheightadjustableinbuilt-incondition.
(Forinstallationinstructionspleaserefertopage2)
applicationexample
(deliverywithoutcomponents)
RoHS
conform
Page1/2
07.06.13
07.06.13
MN
MN
Universal DIN-Rail Holder
19“ / 4U
53719.1
53719_1_ENG
RoHS
conform
Page2/2
HorizontallyMounting WallMounting
VerticallyMounting
Depth of DIN-rail can be adjusted via the long hole
left/right freely.
Also possible after installation of the holder!
Screws must be loosened only lightly.
Note!
Position of the DIN-rail must be know, because
mounting happens thrue xed holes.
Also possible after installation of the holder!
Screws must be loosened completely.
Side part left/right are turned, so at the outside are
no sharp edges.
Rest of mounting like in picture. 1/2
nose to outside
nose to outside nose to inside
