EJEAS E1 User manual

1
www.ejeas.com
E1
USER MANUAL
Helmet Bluetooth Earphone

1
Speaker
Volume +
Indicator
Volume -
Power ON / Phone Button
Charging
1. Installation
Stick the E1 on both sides
inside the helmet
(The Velcro is replaceable)
1
Adjust the Mic position for a
better fit
2

2
2. Cellphone Operations
Power ON Press the “Volume -” & “Phone”
buttons simultaneously for 1s
"Ding~Ding~Ding~Ding~"
Standby Blue light flashes slow
Power
OFF Indicator lights off
Power ON / OFF
Please charge before using
1s 1s
Single-click Double-click Long-press
for 1s Simultaneously press for 5s
1s 5s
Basic Operation Diagram
Phone Pairing
Red and Blue light flash quickly
"Pairing"
1
2
5s
When standby, long-press the “Phone”
button for 5s to enter the pairing status
Turn on the “Bluetooth” of cellphone,
find and pair the E1
(If no paired, will exit the pairing within 2min)
Bluetooth
E1+
Pairing Successful
Blue light slow flashes twice
(The cellphone must support HFP)
"Pairing Successful"
"Connected"
Current battery status will
show on the cellphone

3
Phone Re-connection
Power ON the E1,
it will auto reconnect
to the cellphone
or
TEL Priority
When listen to music, and receive a phone call
Call Music Interrupt Hang up Music Restore
Phone Answering
Auto answering
within 8s
if no other
action taken
or
Hang up the Call
Call Rejection
2s
Last Number Redial Cancel the Redial

4
Music Switching
2s 2s
Music Play/Pause
Volume Control
Low Battery Indication
Red light quickly flashes twice
"Low battery"
Charging Indication
Charging Red light always on
Full Red light of
Phone must support the voice assistant (Google assistant & Siri)
Voice Assistant
voice
assistant
1 2
Turn on the voice assistant Press the “Phone” button for 1s
1s

5
Reset
The red and blue lights quickly flash four
times simultaneously
"Do~Do~"
Long press the “+” , “-” , “Phone”
buttons for 5s at the same time
5s
4. Product Characteristics
Bluetooth Version:
Technical Support:
Audio Encoding Format:
Working Distance:
Temperature:
Battery Parameter:
Power Adapter:
Charging Time:
Working time:
Standby time:
Charging Interface:
Approximately 19 hours
Over 200 hours
DC 5V/1A
Micro-USB
-10~50°C
3.7V/360mAh
Approximately 2.5 hours
CVC noise cancellation, 3D sound
Bluetooth 5.1
SBC & AAC
Over 10 meters

6
Attention
1.
Installing equipment on the helmet is a modification of the helmet, which
may cause the helmet's warranty to fail or hinder the helmet's function. So
please fully understand the facts when using with the helmet. If you can’ t
accept, please return the product.
2.
Before driving, please make sure that the product is firmly and correctly
mounted on the helmet. If the product falls off during driving, it may cause
injury or accident.
3.
To ensure riding safety, please use this product carefully while on the road to
avoid serious accident or injury.
4.
In case of rain, please put the device jack down, USB rubber plug tight.
5.
The product contains 3.7V/180mAh battery. The battery capacity will change
with the temperature. When the battery is used at low temperature or below
0° C, the battery life of the product may attenuate to different degrees.
6.
If the electronic function fails, please power off and try again.
Precautions for battery use
1.
Please don't put the discarded batteries together with the general household
garbage. In areas with relevant laws & regulations on recycling and disposal
of waste batteries, please follow the relevant regulations of the local admin-
istrative department to make a contribution to environmental protection.
2.
Don't short-circuit the battery. A short circuit occurs when metal objects
(keys, jewelry, wires, COINS, or other conductors) accidentally connect the
positive and negative electrodes of a battery. A short circuit can damage
batteries or connectors & may cause significant property damage or person-
al injury. Please keep the charged batteries properly and don't leave them in
your pocket, wallet or other treasure bag with metal objects.
3.
Don't put the battery on fire or place it in a hot place to avoid leakage,
overheating, bursting or fire.
Warning
If the local law prohibits using two headphones simultaneously while riding
a motorcycle, please only use one only. Non-compliance this warning, the
company won't take any responsibility.
Usage of this product at a high volume for a long time will cause damage to
your ears & hearing. Please keep the volume at an appropriate level.

7
4.
Don't disassemble, weld or modify the battery. Don't place the battery in a
place with strong mechanical impact. Don't puncture the battery with a hard
object. Otherwise, the battery will leak, overheat, burst or catch fire.
7.
Don't transfer batteries from other uses. Don't use any damaged charger or
battery. If the temperature of the battery is too high during use, charging or
storage, or abnormal phenomena such as discoloration, deformation,
bulging and leakage occur in the battery, please stop using and replace the
battery, so as not to cause safety problems.
5.
Don't remove, squeeze, heat or burn the battery inside the product. It is
strictly prohibited to use sharp objects, screwdrivers or other devices to
puncture or pry the battery. The above operation may cause the battery to
catch fire or burn.
8.
The battery is not waterproof, don't use or charge the battery in the kitchen,
bathroom and other high temperature and humidity places.
9.
When charging, since the battery temperature will rise, please don't put the
battery and flammable objects (such as: bedside, clothes, books, etc.) to
avoid fire.
6.
The battery's electrolyte enters the eye and can lead to blindness. If you
splash the battery electrolyte into your eyes, do not rub your eyes with your
hands. Rinse thorough- ly with water immediately and contact the hospital
for treatment. If the battery's electro- lyte sticks to the skin and clothes, wash
them immediately with soapy water and clean water, and seek medical
attention if necessary.
Environmental friendliness
Toxic and harmful substances or elements and content table.
Toxic or harmful
substances or elements
Part name
Host Battery Accessories
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
Plumbum (Pb)
Mercury (Hg)
Cadmium (Cd)
Polybrominated Biphenyls
(PBB)
Polybrominated diphenyl ethers
(PBDE)
Chromium VI (Cr6+)

8
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including
interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equi pment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does caus harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Changes or modifications not expressly approved by the party responsible for
compliancecould void the user's authority to operate the equipment. This device
complies with Part15 of the FCC Rules. Operation is subject to the following two
conditions:

Shenzhen EJEAS Technology Co., Ltd.
3rd Floor, Kangrui Wisdom Valley,
Longhua New District, Shenzhen,
China
Tel: [phone]
Email: [email protected]
Support: www.ejeas.com/support/
Facebook: www.facebook.com/EJEAS2016
TouTube: www.youtube.com/c/VnetphoneEJEASIntercom
www.ejeas.com