Electric Vehicles Oz 1600w User manual

>>>"Please"read"these"instructions"before"opening"the"carton"<<<"
!
1600w & EVO 2000w Assembly Instructions
Ensure carton is in é Upright Position é as per Arrows or Lettering on Carton
NB: If the Carton/Crate is not in upright position, contact the freight company and let them
know immediately.
•Remove outer Carton/Cardboard
•You will see ‘Your New Scooter’ in a steel crate.
“We know you’re possibly very exited about your new Electric Scooter but now
we would like you to take a deep breathe before just ripping into it”
To avoid damage to your Electric Scooter we encourage you to follow these
relatively simple instructions.
The crate is comprised of two parts.
•Remove the six (6) bolts at the bottom of the crate.
•Slowly lift the top part of the crate up and away from the Lower part of the Crate.
•Your Scooter should still be secure within the Second or Lower part of the Crate.
•Carefully untie the contents on the Deck of your Scooter.
•Remove Seat Assembly;

>>>"Please"read"these"instructions"before"opening"the"carton"<<<"
!
Note: this will have the Battery Charger, Tool Kit and Instruction Manual attached to it.
•Remove the Battery Charger, Tool Kit and User Manual from the Seat Assembly
Do not remove the Cardboard from the Deck as this will protect the Deck from
damage during assembly of Steering
Using either the Tool Kit provided or your own Tools;
•Lift steering column into place and secure with fittings provided.
•Lock Steering Column into place.
•Fit Handle Bar and secure firmly. Take your time fitting Handle Bars.
•Remove the cardboard protecting the deck.
•Remove the Two Bolts that secure the Cross Brace. The Scooter should remain upright.
•Cut the wire near the rear wheel that secures the scooter to the Lower part of frame.
•You should be able to now wheel the scooter backwards out of the frame.
Note: this maybe a bit tight due to settling during transport.

>>>"Please"read"these"instructions"before"opening"the"carton"<<<"
!
•Remove the four (4) screws to the rear of the Scooter Deck.
•Lift the deck; like the bonnet of a car
•You will see the Battery inside.
Note: There is no need to remove the Battery during assembly.
•Connect the Battery to the Scooter power supply (Red and Black Cables).
Note: You may hear a ‘POP’ sound, when connecting the battery, this is normal.
Near the Battery Connection you will see one of these; a looped Red Wire
If it is for Hire Use leave it in place, if not it can be removed
•Lower Deck and secure the four (4) screws.
•Insert Seat Assembly in hole in Deck.
•Insert charger plug to the right hand side front of scooter just below the Scooter Deck.
•Charge overnight.
•Check and adjust tyre pressure.

>>>"Please"read"these"instructions"before"opening"the"carton"<<<"
!
You are now good to go... Enjoy the ride
Remember:
This Electric Scooter is for Off Road use only.
It is not a Road Vehicle and should not be ridden on what is termed a
designated road.
Make sure you wear a Helmet at all times while riding and wear at least basic
safety gear (Sneakers, Jeans and Long Sleeve Shirt etc.).
We don’t want any causalities.
Things to do after assembly:
1. Follow the instructions in the Owners Manual, this forms part of your
warranty
2. After the first few rides we would suggest, with the tool kit provided take
time to check all those nuts, bolts and other fittings to ensure all components
are nice and tight.
If you have any concerns feel free to contact us for assistance go to our website:
https://electricvehiclesoz.com.au/contact-us
OR
Simply give anyone of us a call.
Post your New Scooter and any Video action shots on our FaceBook or Instagram
Page/Sites:
‘Electric Vehicles Oz’