Energy CineLED 19" User manual

User Manual

41
ENGLISH
INTRODUCTION
Thank you for having acquired this Multimedia TV Energy CineLED. Welcome to the Energy TV
Multimedia World. The following sections will give you an overview of your new device and its basic
features.
Please read this manual carefully before you begin using the product.
SAFETY INSTRUCTIONS
To ensure your safety and that of others, please read this information carefully before using this
product. Save this information for future reference.
This symbol indicates that this product incorporates double insulation between the supply
and the elements accessible to the user.
Caution : To reduce the risk of fire or electric shock, do not expose your CineLED TV to rain or
moisture.
SECURITY CONSIDERATIONS
≥Do not disassemble or modify the device.
≥Do not expose your CineLED TV to dripping, splashing or wet conditions.
≥Don’t let the device get wet.
≥Don’t place objects with liquid on top of the device.
≥Keep the product away from direct sunlight and heat sources such as radiators or
heaters.
≥Don’t place sources of naked flame, such as candles, near the device, cables, etc.
≥Don’t place the product on a stand or table unstable. The unit may fall, causing
damage or injury.
≥Don’t let the device suffer blows or falls.
The CineLED TV 16 SRS HD+ incorporates an external AC power adapter. Only use the AC adapter
included with the product. The use of any other adapter will void warranty. We recommend that
you unplug the adaptor from current when the unit will not be in use for a long period.
Caution : Make sure that the current voltage is the same as that of the receiver. To avoid the risk of
electric shock, do not open the lid or the back of the television.

42
VENTILATION
Slots and openings in the device are for ventilation. Do not cover unit, as it may cause overhea-
ting.
NEVER let children introduce anything in the device holes or slots.
MANTENIMIENTO
The CineLED TV does not require maintenance.
BATTERY DISPOSAL
Please ensure that batteries are disposed safely. Never throw batteries in a fire or with other
household waste. Ask the local authority about how to dispose batteries.
CLEANING
ALWAYS turn off your CineLED TV for cleaning.
Do not use liquid or aerosol cleaners.
Clean your CineLED TV with a soft cloth, you can use a mild soap dissolution and a damp (not
wet) cloth.

43
ENGLISH
GENERAL VIEW
SCREEN CINELED 16“.
FRONT
3
4
3
17
9
10
5
11
7
6
8
18
19
20
21
23
22
15
16
1
2
12
13
14
1. OPERATION LED INDICATOR. Shows operation status. red indicates standby mode,
blue indicates in operation.
2. REMOTE SENSOR (IR): receives the signal from the remote control.
3. SPEAKERS.
4. TV STAND.
LEFT SIDE PANEL
5. Antenna RF IN. Plug here the antenna cable to watch TV Broadcast.
6. PC VGA input. It is used to connect devices such as personal computers, to use
your CineLED TV as a PC monitor.
7. AUDIO IN. Used in conjunction with the VGA PC input, to enjoy the sound of your
computer through your CineLED TV.
8. COMMON INTERFACE / CAM (Conditional Access Module) OR PCMCIA. It is used
to add “Pay per view” modules.
9. MINI SCART. It is used to connect devices such as DVB-T, DVD, Video… with
standard definition. Use the SCART cable adapter included.
10. USB connector. It is used to connect to an external USB device and play
multimedia files or DTV recordings.

44
11. HDMI 1. It is used to connect to a device with HDMI output.
REAR PANEL
3
4
3
17
9
10
5
11
7
6
8
18
19
20
21
23
22
15
16
1
2
12
13
14
12.AV input. Composite video and stereo analogue audio input.
13.DC IN 12V. It is used to plug the 12V DC adapter.
14.COMPONENT VIDEO INPUT. Here you can connect devices with YPbPr component video
output.
NOTE: This input shares the L+R audio stereo AV input.
15.HDMI 2. It is used to connect to a device with HDMI output.
16.ANCHORS FOR WALL MOUNTING. Use the VESA standard 100 x 100 mm.
RIGHT SIDE PANEL
17.

:Press this button to select input source. It is also used to confirm the selection when you use
the menu.
18. MENU: Press to open the menus / exit the current menu and return to the previous menu.
19. CH+: Scroll upwards the menu. In TV mode, is used to switch to the next channel.
20. CH-: Scroll down the menu. In TV mode, is used to switch to the previous channel.
21. VOL+: increase the volume. Move to the right / change the configuration menu.
22. VOL-: lower the volume. Move to the left / change the configuration menu.
23. : On / off button.

45
ENGLISH
GENERAL VIEW
SCREEN CINELED 19” / 22”
FRONT
3 1
4
3
16
7
9
11
5
10
6
8
17
18
19
20
22
21
15
2
12 14
13
1. OPERATION LED INDICATOR. Shows operation status. RED indicates standby mode, BLUE indicates
in operation.
2. REMOTE SENSOR (IR): receives the signal from the remote control.
3. SPEAKERS.
4. TV stand.
LEFT SIDE PANEL
5.
IN RF antenna. Plug here the antenna cable to watch TV Broadcast.
6. PC VGA input. It is used to connect devices such as personal computers, to use your CineLED TV as
a PC monitor.
7. AUDIO IN. It is used in conjunction with the VGA PC input, to enjoy the sound of your computer
through your CineLED TV.
8. HEADPHONE. You can plug your headphones here, or use it to connect your TV to external sound
equipment.
9. COMMON INTERFACE / CAM (Conditional Access Module) OR PCMCIA. It is used to add “Pay per
view” modules.
10. HDMI 1 and 2. It is used to connect to a device with HDMI output.
11. USB connector. It is used to connect to an external USB device and play multimedia files or DTV
recordings.

46
REAR PANEL
3 1
4
3
16
7
9
11
5
10
6
8
17
18
19
20
22
21
15
2
12 14
13
12. AV input. Composite video input and analogue stereo audio.
13. COMPONENT VIDEO INPUT. Here you can connect devices with component video output YPbPr.
NOTE: This input shares the L+R audio stereo AV input.
14. SCART. It is used to connect devices such as DVB-T, DVD, Video… with standard definition.
15. ANCHORS FOR WALL MOUNTING. Use the VESA standard 100 x 100 mm.
RIGHT SIDE PANEL
16.

: Press this button to select input source. It is also used to confirm the selection when you
use the menu.
17. MENU: Press to open the menus / exit the current menu and return to the previous menu.
18. CH+: Scroll upwards the menu. In TV mode, is used to switch to the next channel.
19. CH-: Scroll down the menu. In TV mode, is used to switch to the previous channel.
20. VOL+: increase the volume. Move to the right / change the configuration menu.
21. VOL-: lower the volume. Move to the left / change the configuration menu.
22. : On / off button.

47
ENGLISH
REMOTE CONTROL
BUTTON DESCRIPTION 1. : Press to toggle Power On/Standby Mode.
2. : Press to mute TV, press again to restore the volume to the
previous level.
3. MEDIA / Selects RED in Teletext and menus.
4. SOUND / Selects YELLOW in Teletext and menus.
5. IMAGE / Selects GREEN in Teletext and menus.
6. SLEEP / Selects BLUE in Teletext and menus.
7. : In PVR mode / Time Shift / Multimedia: Fast reverse.
8. : In PVR mode / Time Shift / Multimedia: Fast forward.
9. :In PVR mode / Time Shift / Multimedia: Back to top /
Previous.
10. CH LIST: In PVR mode / Time Shift / Multimedia: Next. In TV
mode: Displays the list of channels.
11. : Play button. Press in Multimedia mode to begin playback of the
selected files.
12. : PAUSE button. Press to pause playback, press again to resume
playback.
13. / FAV: STOP button. In PVR mode / Time Shifting / Multimedia
stops the playback / recording.
14. INDEX / REC LIST: In TV mode: Displays the list of PVR recordings. In
some menus adopts special functions.
15. TEXT: Press to toggle between TV and Teletext.
16. TV/RADIO: Press to toggle between TV and Radio.
17. ASPECT: Press to toggle between the various formats of image size.
18. RECALL: Click to switch to the previously selected channel, press
again to return.
19. MENU: Access the menus on your TV.
20. EXIT: To exit / go back on the menus of your TV.
21. CURSOR ARROWS: Use these arrows to scroll through the menus.
22. OK: To confirm the selection. In Multimedia mode add files to the
playlist.
23. GUIDE: Access the programming guide.
24.

: cycles the different input sources, HDMI, Scart, AV…
25. VOL + / - : Set the TV volume.
26. CH + / - : Switch to next / previous channel.
27. INFO: Press to view on screen information about the DTV program
you’re watching.
28. : REC button. Press for record the DTV program you’re watching.
29. NUMERIC KEYS: direct access to programs and select menu options.
30. AUDIO BUTTON: Use this button to select between the different audio
languages available.
31. SUBTITLE button: Use this button to select between the different
subtitles languages available.
1
3
7
11
15
19
21
23
25
30
2
6
10
14
18
20
22
13
98
54
12
17
16
28
27
29
24
26
31

48
TV STAND INSTALLATION
Place your TV on a flat surface with the front down. Use a soft cloth to avoid damaging the panel or
the surfaces. Locate the TV bracket and the screws between the accessories that you will find in
the box. Screw onto your TV Cineled stand.
WALL MOUNTING
Place your TV on a flat surface with the front down. Use a soft cloth to avoid damaging the panel
or the surfaces. Remove the bolt in the stand. Subsequently, remove the screws that attach the
mast to your TV.
Save all attachments for future needs.

49
ENGLISH
PLACING THE BATTERIES
Remove the remote control battery cover and place two AAA batteries.
Put the battery cover back on.
Be sure to replace the batteries in correct direction.
If remote control range decreases replaces the batteries. Do not recharge, neither disarm nor
heat batteries.
The misuse of batteries can cause leaks that may damage remote control.
Save the batteries out of the reach of children. If a person swallows a battery must receive
medical help immediately.
Do not try to recharge batteries.
Don’t throw batteries in fire, disassemble or short circuit them. Change the batteries at least once
a year to avoid spilling them. Changes the two batteries at the same time and replace them by
others of the same type.
When the remote control will not be used for a long time, please remove batteries.
Do not expose the remote command unit to splashing of liquids, sources of heat or direct sunlight.
USING THE REMOTE CONTROL
To use the remote control point it to the IR receiver.
The remote control has a maximum range of 6 mt. from the receiver in an angle of up to ± 30°.
If batteries are low, the command may not work correctly, so it is recommended to replace the
batteries immediately.
The remote will not work if the path to the receiver is blocked.
Direct sunlight or very intense light can reduce the remote control sensitivity.

50
INSTALLING YOUR CINELED TV.
IMPORTANT .Do not plug the TV to current until all connections are completed. If you are going
to connect external devices such as DVD, or audio equipment, be sure to read its respective
manuals prior to connecting to your CineLED TV.
CABLE ANNTENA RF CONEXION
Standard antenna 75 ohm cable type IEC male-female connectors are needed in order to enjoy of
television broadcasts (DTV/ATV). Connect the cable to the TV RF antenna input, at the upper left panel
connection. Connect the other end to your antenna RF socket.
Coaxial Cable 75ohm RF antenna cable
POWER ADAPTER (CINELED TV 16)
The CineLED TV 16 connects to the electrical network via a power adapter 12V / 3A included. Only
use the AC adapter included. Plug the cable to the DC 12V input at the rear panel. The use of any
other adapter will void the warranty.
Caution: Make sure that current voltage is the same as the receiver. To avoid the risk of electric
shock, do not open the lid or the TV case.

51
ENGLISH
CONNECTING HEADSET (CINELED TV 19 / 22)
You can connect a stereo headset to headphones jack output at left side panel for private listening.
Once the headset is connected, the speakers will turn off automatically.
Caution : a too high volume can be harmful to your ears. Decrease the volume before you connect
the headset. Then increase the volume until you reach a comfortable level.
SYSTEM START UP
Once you have completed connections, you are ready to use your CineLED TV.
Make sure the receiver is connected to current. To turn on your TV, press the ON/OFF button ( )
(ON/OFF) at the right panel.
FIRST TIME INSTALLATION
If you are using the receiver for the first time, or restored to factory defaults, the system will enter
into settings mode

52
Use the directional arrows ▲▼◄ ► to select Eco Mode, Dynamic Mode, User Mode, your
desired language and country to be displayed on the menu.
Eco Mode, Dynamic Mode and User Mode
1. E co Mode is an energy-saving Mode: Eco Mode is recommended for normal viewing setting.
2. Dynamic Mode: is an improved option for retailers for advertising or product presentation.
Dynamic Mode has a brighter image than Eco Mode.
3. User Mode: This setting give you backlight and power consumption total control via backlight
setting in Picture Menu.
You can switch between Eco Mode or Dynamic Mode or User Mode.
Press [OK] to begin the automatic channel search. The TV will start to tune the programs
automatically starting by ATV (Analog TV). You can skip the ATV search if your country does not
support this system, by pressing the [MENU]key.
Press [EXIT] to cancel search, or press [MENU] if you want to skip the search in progress and
move on to the next search. The search order is ATV / DTV (Includes RADIO AND DATA).
You can change the on-screen menus language later through Menu / Options / Language
Settings.
Once the channel search has been completed, you are ready to watch TV, the system will
automatically show the first DTV tuned channel.

53
ENGLISH
BASIC OPERATION OF THE USER INTERFACE
If your TV is already configured, the system will display the channel on which it was before being
switched off.
In the button panel on your TV or on the remote control press [ CH+ / CH- ] to switch it to the next
or previous program.
Press [ Vol + / VOL - ] para ajustar el volumen de audio. o set audio volume. Press (MUTE, ) to
mute the TV completely, press it again to restore volume to the previous level.
You will find shortcut keys to modes and settings:
MEDIA (Red button ): Multimedia shortcut, from where you can view content via the USB
port.
SOUND(Yellowbutton ): sound presets. You can choose between Standard / Music / Movies
/ Sports and User. You can set this last setting to your liking through Menu / Sound / Sound Mode
/ User.
IMAGE (Green button ) :image presets. You can choose between Dynamic / Standard / Soft /
User. You can also set this adjustment via Menu / Image / Picture Mode / User.
SLEEP (Blue button ): sleep timer. Press this button if you want the TV switches off
automatically after 10 / 20 / 30 / 60 / 90 / 120 / 180 / 240 minutes.
TXT Teletext mode. Use in conjunction with the colour keys on the red/green/yellow/blue row and
the special keys for teletext.
Press TV/RADIO to change between TV/Radio.
Press ASPECT ASPECT to change the image aspect ratio between 16:9 and 4:3.
Press RECALL to switch to the channel that had been previously selected, press again to return to
the channel you were watching.
MENU: Access the menus on your TV system. Use the directional keys ▲▼ ◄► Up/Down/
Left/Right] and [OK] to move and select settings via the on-screen menus. Press MENU again to
go back when navigate through the on-screen menus.
EXIT: Press this button to exit the on-screen menus.
GUIDE: Opens the programming guide. You can navigate using the directional keys.
Press INDEX to select the type of search by date/channel.
Press RECORD (Red button) to schedule the recording of an event.

54
Press INFO (Green button) to access the event information.
Press PROGRAMMING (Yellow button) for access the schedule event list, you can delete any of
them by pressing DELETE (red button).
Pres REMINDER (Blue button) to display a message on the screen when the selected event starts.
You can completely set reminder time and frequency, as for example, display weekly reminder.
SOURCE: Press to switch between different input sources.
≥DTV (Digital Terrestrial Television).
≥• ATV (Analog TV).
≥• SCART (Euroconnector).
≥• YPbPr (entry by Componentes) * .
≥• PC (VGA input).
≥• HDMI 1.
≥• HDMI 2.
≥• AV Input (composite video / analog audio) *.
* These entries share the audio input AV L+R IN connection.
[ 0] - [ 9]: the numeric keys are used to select the desired program.
INFO. Displays the information of the content you are watching. On MULTIMEDIA mode shows the
playback interface. Scroll through the interface with the directional keys ▲ ▼ ◄ ►. Press
INFO again to hide the interface.
REC ( ). Press this key to activate the PVR recording. Press REC again to hide interface and
continue recording.
AUDIO. Selects the content audio language.

55
ENGLISH
Note: The audio selection will be available according to the sender channel broadcast, or multime-
dia content displayed.
SUBTITLES. Select the desired subtitles language for the content displayed.
Note: Subtitles will be available according to the sender channel broadcast, or multimedia content
displayed.
PVR FEATURE
Your CineLED TV allows you recording DVB-T content in USB devices. This feature is only
available when a compatible FAT or FAT 32 USB device is plugged in and your TV is set to DTV
source (DVB-T). You can check your USB device compatibility in MENU / OPTIONS / PVR FILE
SYSTEM.

56
Press
REC button ( ) to activate the PVR recording once you have plugged an USB compatible
device. Press it again to hide the on-screen menu.
Press
STOP ( ) key on your remote control to stop the recording.
Press
PLAY (►) to play last recording.
Pulsa INDEX / REC LIST at any time to access the recording list. Select the recording with the
directional keys ▲ ▼ and press OK to play or EXIT to exit.
While playing content press the directional button down
(▼) to show or hide the playback
interface.
TIME SHIFT FEATURE
Your CineLED TV allows you to control in real-time DVB-T broadcast content as if it were a video
player, i.e. you can pause the television broadcasts at any time, fast forward, rewind, play a part
continuously, etc.
This function is only available when a compatible USB device format in FAT or FAT 32 is plugged
in and your TV is set to DTV source. You can check your USB device compatibility in MENU /
OPTIONS / FILE SYSTEM PVR.

57
ENGLISH
Press PAUSA ( )at any time while watching DTV to activate the time shift feature. The
broadcast will pause and the playback interface will appear. The time counter shown will tell
you the length of the content that is being buffered. You can then scroll through the content
using the playback interface screen.
Press
PLAY (►) to continue playback. Press PLAY (►) again to set the A start loop point
playback that is repeated continuously. Press
OK to set the point B. he loop A-B is played
continuously then. Press
STOP to escape the playback loop and to continue with the TIME SHIFT
playback.
Press Fast Forward / Backward while TIME SHIFT playback to move through ( /) recorded
content. You can select the speed pressing repeatedly between 2X and 16X.
Press Next or Previous to forward ( / ) or rewind 30 sec.
Press
STOP to stop the TIME SHIFT playback and return to live DTV broadcast.
During TIME SHIFT playback press the directional button down (▼) to show or hide the on
screen interface.
CINELED TV MENUS.
Press the MENU key to access the TV menus. The available options are CHANNEL / IMAGE /
SOUND / HOUR / OPTIONS / LOCK / MULTIMEDIA. Use the directional arrows(▲▼◄ ► ) to
scroll through the menus, and follow the on-screen instructions.
Some of the menu options will be available only when a specific source is selected.
1. CHANNEL
The channel menu operates for DTV digital television and ATV analogue television sources. You
can tune TV channels from this menu.
1.1 Auto Search. Automatic DTV and ATV channel search. Also tune radio programs and data

58
(in case it exists in your area).
Select between DTV, ATV and DTV + ATC.
Select the installation country.
Press [ OK ] to begin the automatic search.
Press [ EXIT ] at any time if you want to cancel the automatic search. When tuning is complete,
the system automatically switches to the first DVT tuned channel.
1.2 Digital Manual Search. Manual DTV programs search.
Select the DTV channels to tune in.
Press [
OK ] to begin search.
1.3 Analogue Manual Search. Manual analogical signal channels search.
Use the arrow keys (▲▼◄ ► ) to choose the number of program where will you store on
your tuning, the tv system (depends on the setup country), the current program, search of
frequencies, and fine tune.
Press [EXIT] during the scan to stop the process. Once you’ve tuned the desired frequency,
press the [RED] button to save.
Press [MENU] to exit.

59
ENGLISH
1.4 Edit programs.
Use directional keys (▲▼ ) to scroll through programs.
Press [
RED ] if you want to delete selected program.
Press [
GREEN ] to rename selected program (it only works once the ATV source is selected).
Press [
Yellow ] to move and sort programs.
Press [
Blue ] to skip programs, this will cause it to hide in the channels list. You can show it again
from this menu.
1.5 Signal Information. This screen shows information about quality and other selected program
signal parameters.
1.6 CI information. This screen displays information about the Common Interface input. Used CI
slot to insert CAM modules or PCMCIA to access pay-per-view services.
1.7 Software Update (USB). Use this option to update the software version of your CineLED TV
via the USB port.
Caution : Do not use any update file that is not supported by energy system. You will find updates
for your CineLED TV software at www.energysistem.com. The improper use of this option may
void the warranty.