Evervue Ocea Pro User manual

1
© Evervue USA Inc. All rights reserved. The Evervue trademark is registered.
Information subject to change without notice.
Enter the sequence 2-0-0-8 on the remote to access the “Design setting”.
Step 3
Access the input source menu, located in the upper right portion of your screen, and highlight HDMI1
option. Please do not press select.
Step 2
In the event that the HDMI1 button is inadver-
tently pressed, kindly press the “Exit” button
and repeat step 2.
Step 1 Locate and press the “Source” button on the remote.
User’s Guide on Accessing Power On/Off Settings
for 4K in Ocea Pro 28” / 32” / 40” / 50” / 75”
Press
2-0-0-8

2
© Evervue USA Inc. All rights reserved. The Evervue trademark is registered.
Information subject to change without notice.
Step 6
Select “Power” within the “USER SET” menu and use the right arrow button on the remote control to
switch the mode to “off”.
Press the right arrow button twice or until the power settings (located at the bottom of the
screen) switch to “off”.
Step 5
Step 4 Navigate to “USER SET” menu within the “Design Setting” and select it by pressing “OK”.
User’s Guide on Accessing Power On/Off Settings
for 4K in Ocea Pro 28” / 32” / 40” / 50” / 75”