fantastic HS-06 User manual
Thank you for choose Galaxy Star Projector. Read all information
below before use so that you can use it properly.
MODEL NO: HS-06
Galaxy Star Projector
User Manual Power Button Mode Switch Volume Up Volume Down
Power Button
Laser Adjustment Mode
LED Color Red
LED Color Blue
LED Light Fast Movement
LED Light Slow Movement
Time-Switch O
Bluetooth Mode On/O
Previous Song
Next Song
Volume+
LED Color Green
LED Color White
Voice Control LED Flash
LED Brightness Adjustment
LED Colorful Light
Breath Mode
LED Light Static
Breath Mode
Turn O after 2H
Turn O after 1H
Pause/Play
Volume
Remote control instructions:
LED light switch click to turn on or o the lights
Laser switch, click to turn on to turn o the laser light
Press the red, green, blue and white buttons to turn on or o the corresponding lights
Volume adjustment, click to increase or decrease volume
Motor speed adjustment, press S+ to turn on the motor slowly, then press S+ to increase the speed,
press S- to turn o the motor
The brightness of the lamp is adjusted to three levels. The brightness of the power-on is 100%.
Press it once to 60%, press 30% again, press it again to 60%, press 100% again, and the cycle
continues.
Galaxy Star Projector
Remote Control USB Cable
01
PRODUCT DESCRIPTION
02
FUNCTION BUTTON
03
REMOTE CONTROL
Fantastic Light Show
Color Black / White
Style Red Green Blue White
Light Source Type LED
Power Source Corded Electric
Controller Type Remote Control
Wattage 6.5 Watts
Remote Control Distance 5 M
1.Press and hold the rst button for 2 seconds to turn on or turn o, and short press the Bluetooth
audio function when it is turned on;
2.The second button is to switch the lighting mode, short press to switch between bright
monochrome, monochrome red, green, blue and white breathing slowly, colorful light breathing
slowly, voice control change mode, long press to switch the laser light;
3.Short press the third button to decrease the volume, long press the previous song; (the third
button silkscreen is -)
4.Short press the fourth button to increase the volume, long press a song; (the silk screen of the
fourth button is +)
1.Do not modify or repair this product.
2.It is forbidden to use voltages other than 120V AC, which may cause damage, re and electric
shock.
3.Do not excessively bend, pull or twist the power cord, which may damage the power cord and
cause a re.
4.Do not expose the host to rain or other liquids.
5.Do not touch the power plug with wet hands.
6.Do not use the device in the place which with propane, gas, natural gas, or any other ammable.
7.Please keep the device stored in dry places.
FREE 2 - YEARS
ACTIVATE WARRANTY
Prime Membership Benets
Welcome to Join The Club Membership Program Join Shop
Members to Enjoy Exclusive Rights
Member
Gift
Giveaway
Gift
Member
ShoppingPrivilege
More
Dedicated
customer service
New
Releases
http://www.aoogmall.com
Activate here 7-days
Extend warranty for 1-year
WARRANTY CARD
Need help? Contact
Scan or Enter
Online-warranty.net
04
PRODUCT SPECIFICATION
06
SAFETY INSTRUCTIONS
05
USER MANUAL
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been testedand found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and canradiate radio frequency energyand, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.
