Forever Redwood SHELDON'S MONKEY BARS User manual

ASSEMBLY INSTRUCTIONS FOR THE
SHELDON´S MONKEY BARS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
Sheldon´s Monkey Bars
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
Drawing
Description
Legs
Leg Bases
Diagonal Supports
Supports
Knee Braces
Top Supports
Ladder Bar
Qty.
2
2
4
2
4
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
Sheldon´s Monkey Bars
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach the legs and the diagonal supports to the leg
bases. / To attach the supports to the legs. / To attach the
knee braces to the legs and to the supports).
5/16´´ X 3´´ Bolts
(To attach the diagonal supports to the legs).
3´´ Deck Screws
(To attach the top supports to the supports).
½´´ X 8´´ Bolts
(To attach the ladder bar to the legs).
Note: Dimensions of your hardware will vary depending on size.

P| 3
Sheldon´s Monkey Bars
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
DESCRIPTION
Legs
Leg Bases
Diagonal Supports
Supports
Knee Braces
Top Supports
Ladder Bar
Note: Part numbers in the Drawing
are for reference only. These do not
match to the numbers marked on the
parts sent.
1
1
2
3
4
5
5
6
6
4
3
3
3
5
5
7
2
4

P| 4
Sheldon´s Monkey Bars
www.ForeverRedwood.com
Step 1: Use 5/16´´ x 3 ½´´ bolts (A) to attach the legs (1) to the leg bases (2). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 2: Attach the diagonal supports (3) to the legs with 5/16’’ x 3’’ bolts (B) and to the leg bases with 5/16´´ x 3 ´´ bolts (B).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
2
1
3
5/16´´ X 3 ½´´ Bolts
3
5/16´´ X 3 ´´ Bolts
5/16´´ X 3´´ Bolts

P| 5
Sheldon´s Monkey Bars
www.ForeverRedwood.com
Step 3: Use 5/16´´ x 3 ½´´ bolts (A) to attach the supports (4) to the legs. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 4: Attach the knee Braces (5) to the legs and to the supports with 5/16´´ x 3 ½´´ bolts (A). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
4
4
5
5
5/16´´ X 3 ½´´ Bolts
5
5
5/16´´ X 3 ½´´ Bolts

P| 6
Sheldon´s Monkey Bars
www.ForeverRedwood.com
Step 5: Use 3´´´Deck Screws (C) to attach the top supports (6) to the supports. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 6: Finally, attach the Ladder Bar (7) to the legs with ½´´ x 8´´ bolts (D). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
7
6
6
3´´ Deck Screws
½´´ X 8´´ Bolts

P| 7
Sheldon´s Monkey Bars
www.ForeverRedwood.com
This completes the Sheldon´s Monkey Bar Assembly. Hope you enjoy your set for many decades. If you ever have a problem or
a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.