Freeview S15/8 User manual

15’’ LCD TV
Model: S15/8
USER GUIDE

WARNINGS
Thank you for purchasing this television. For your safety, please take time to read
these instructions carefully in order to familiarise yourself with the operation
of the appliance and the important safety information. We strongly recommend
that this product is installed by a competent person. If in doubt, refer to the retailer
or the manufacturer helpline.
Caution
This television contains no user serviceable parts. Please refer to the manufacturer
or authorised repair agent in the event of malfunction. Do not remove the back cover
from the television.
Warning
To reduce the risk of fire, electric shock or damage to the television, do not expose
it to dust, rain or moisture, or place any objects filled with liquids on or near the television.
Do not place the television in a confined space, ensure that nothing can obstruct
the ventilation openings at the rear of the television.
Do not place naked flames on or near the television.
Dispose of this television and any components including batteries in an environmentally
friendly manner. If in doubt, please contact your local authority for details of recycling.
Your LCD TV should be cleaned using a dry or slightly damp cloth. You should not use
an alcohol based cleaner
Safety
For your safety, this appliance is fitted with a fused moulded 3 pin mains plug. Should
the fuse need to be replaced, ensure that any replacement is of the same amperage
and approved with the BSI mark. ( )
Never try and replace the mains plug unless you have adequate qualifications and are
legally authorised to do so. In the event that a replacement Mains cable is required,
contact the manufacturer for a suitable replacement.
Never use the television if it is damaged in any way.
Always place the television on a flat level surface avoiding anywhere which may
be subject to strong vibration. Ensure the television is not placed on top of the power
cable as the weight of the television may damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any other device which may cause magnetic
or radio interference with the television. If interference is apparent, move the device
causing the interference away from the television.
Packaging
Please save the packaging for the television as you will need this in the event
of warranty/service repair or support. We are unable to carry out warranty/service
if you are unable to package it correctly. The safest way to package your item in the
event of warranty/service repair is in its original box/packaging

WARNINGS
Screen Burn
A characteristic of Plasma and LCD TV Panels is that displaying the same image for
a long time may cause a permanent after-image to remain on the screen. This is called
screen burn. Most pictures shown on your TV will be constantly moving and fill the screen.
How do I dispose of this product?
UK: Waste electrical products should not be disposed of with
household waste. Separate disposal facilities exist. Fot your nearest
facilities, please see www.recycle-more.co.uk or instore for details.
ROI: Produced after 13th August 2005. Waste electrical products
should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Examples of images that you need to watch out for are as follows
(this is not an all-inclusive list):
TV Channel Logos: e.g. Shopping channel logos and pricing displays-especially
if they are bright and stationary. Moving or low-contrast graphics are less likely
to cause ageing of the screen.
PIP and Multipip: Do not view for long periods of time using the PIP or Multipip
functions.
Time Displays
Teletext: Do not view a stationary page for long periods of time.
TV/DVD Menus: e.g. Listings of DVD disk content.
Pause Mode: Do not leave the screen in pause mode for long periods of time,
e.g. When watching DVDs or videos.
Note: To prevent screen burn if viewing any of the above for long periods of time,
reduce contrast and brightness when viewing. Once burn-in occurs it will never
disappear completely.

CONTENTS
Getting Started Page
What is included in the box with the TV ............................................................... 4
How to set up the TV for the first time
Tuning into Digital / Freeview TV Stations ........................................................... 5
Tuning into Analogue TV Stations (i.e 1 - 5) ........................................................ 5
TV & remote control buttons
Remote control buttons and their functions ......................................................... 6
TV buttons and their functions ............................................................................ 6
Input connections on TV
Connecting power supply ................................................................................... 7
Connecting via S-Video ..................................................................................... 7
Connecting via VGA (For PC mode) ................................................................... 7
Connecting via SCART ...................................................................................... 7
Connecting via Audio ........................................................................................ 7
Connecting TV In .............................................................................................. 7
Digital / Freeview TV operation
Adjusting the picture settings ............................................................................. 8
Adjusting the sound settings .............................................................................. 11
Adjusting General Settings ................................................................................. 12
Using Electronic Programme Guide (EPG) .......................................................... 13
Searching for new digital channels / services ...................................................... 14
First time install / Reinstalling digital TV / radio stations ...................................... 15
Using / changing system Pin code ...................................................................... 15
Analogue TV Operation
Tuning Analogue TV .......................................................................................... 16
Changing country settings ................................................................................. 16
Naming channels .............................................................................................. 17
Editing channels / channel positions .................................................................. 17
Using teletext ................................................................................................... 18
Using with a PC
Installing to use on a Windows XP PC ................................................................ 19
PC Mode Menu Operation (VGA)
Adjusting Contrast ............................................................................................ 20
Adjusting Brightness ......................................................................................... 20
DVD Mode Menu Operation
General Set up ................................................................................................. 21
Speaker Set up ................................................................................................. 22
Wall Mounting
Removing the stand .......................................................................................... 23
Attaching a wall bracket .................................................................................... 23
Using with Sky Digital (B Sky B)
Connecting via SCART ..................................................................................... 24
Connecting via RF ............................................................................................ 24
Universal / Sky Remote Control
Operating TV with Sky Remote Control .............................................................. 24
Frequently Asked Questions .......................................................................................... 25
Technical Specification .................................................................................................. 26
Warranty - Helpline Information ..................................................................................... 26
Index .............................................................................................................................. 27
Customer Support/Technical Helpline
Sky Media UK LTD
Telephone: [phone]
Email: [email protected]
If you experience any problems with this Television,
Please contact the helpline.

4
GETTING STARTED - INCLUDED ACCESSORIES
Accessories
Included with this TV are the following accessories:
1x - User Guide Book 1x - Remote control
1x - RF lead 2x - AAA batteries
1x - AC mains lead 1x - Transformer
Please save your packaging as you will need this in the event
of warranty/service repair or support. We are unable to carry out
warranty/service if you are unable to package it correctly. The safest way
to package your item in the event of warranty/service repair
is in it’s original box/packaging.

5
GETTING STARTED - INITIAL SET UP
TUNING IN DIGITAL TV
IMPORTANT — Please ensure the TV has
reached room temperature before
connecting the power for the first time
1) Connect the mains lead to your electrical outlet
and connect the power adaptor to the television.
2) Connect the RF Cable supplied to the
'DVB-RF IN' on the rear of the TV and connect
the other end of the cable to your TV Aerial outlet
3) Install batteries in the remote control and press
the [POWER] button to turn on the TV.
The ‘Initial Set up-DVBT/Freeview TV’ menu should
now appear. If it does not, please go to step 4b.
4a) Once you have read the on screen message
and checked that you have connected the RF
cable to the ‘DVB-RF In’ on the rear of the TV,
press [OK] on the remote control whilst ‘OK’ is
highlighted on screen.
Auto tune will now take place and set up
is complete.
If you do not see the above screen to tune
in the channels:-
4b) Ensure the TV is in DVB mode (press [AV/TV]
on remote control and select DVB)
Press the button labelled ‘DVB MENU’ on remote
control to access settings menu,
Scroll to ‘Channel Search’ and press OK.
If you do not have Digital TV (Freeview) in your area or
wish to tune in via the analogue signal please follow the
below.
5) Connect the RF Cable supplied to the 'TV RF' on
the rear of the TV and connect the other end of the
cable to your TV Aerial outlet
6) Ensure TV is in ‘TV’ mode. To select TV mode, press
[AV/TV], then scroll to TV and press [OK].
The initial Set up screen will appear as below
7) Once you have read the on screen message and
checked that you have connected the RF cable to the
‘TV RF’ on the rear of the TV, ensure ‘Yes’ is
highlighted and press [OK].
The TV channels will now tune in. After a few minutes,
tuning in will finish and the TV will go into ‘Program Edit’
mode where you can move channels to the desired
positions.
8) Scroll to select the channel you would like to
move/swap, then press the red button at the bottom
of the remote control.
Then, move to the location you would like to move it to.
Press [OK].
Repeat the process with all channels.
To rename the channels, refer to page 17.
Press [MENU] to exit.
Important - Due to signal strength variations across the UK for Digital TV, please note that not all of the
channels/service may be available in your region.
Over the coming months as coverage increases, more services and channels may become available.
Every few months, follow point 4b to re-scan for new channels/services,
In the event of poor reception in either Analogue TV or Digital TV (DVB) it may be necessary to install a signal
‘booster’ to enhance reception. For Digital/Freeview TV (DVB) you may need to upgrade your aerial to a High
Gain Digital version.

6
REMOTE CONTROL BUTTONS & TV BUTTONS
SIDE PANEL BUTTONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
MENU
SOURCE
VOL+
VOL-
PRO+
PRO-
EJECT
PLAY/PAUSE
STOP
BACKWARD
FORWARD
OSD (On Screen Display) Menu
Select the input source: DVB/TV/AV/S-VIDEO/SCART/DVD/PC
Volume up/Right orientation
Volume down/Left orientation
Channel up/Scroll up
Channel down/Scroll down
Power ON/OFF
Remote Control Receiver
Power LED Indicator
DVD - Eject Disc
DVD - Play/Pause
DVD - Stop
DVD - Backward/Previous Chapter
DVD - Forward/Next Chapter
21 INDEX To select and return to the
main directory of TEXT
22 SIZE To zoom in and out for
the display of the TEXT
23 REVEAL To reveal an answer
or information
24 SUBPAGE To open the TEXT function
of sub-page
RED/GREEN/YELLOW/CYAN
25 To select the corresponsive TELETEXT
page after entering the homepage
of TELETEXT
26 FAV To select and store channels
of favorite program
27 LAST
28 SLEEP Applies sleep timer
29 P-MODE To adjust the picture mode
of the TV
30 DVB Menu Opens DVB Menu
31 Eject
32 Stop
33 Play/pause
34 DVD menu
1 POWER Turns the TV on and off from
stanby mode
2 MUTE Mute On/Off
3 0 - 9 Number buttons
4 - / -- Press this button to select
channels of two or more numbers
5 VOL+/- Volume up and down buttonss
6In TV mode, press this button to come
back to the previous TV channel
7 NICAM To select sound modes
8 CH+/- Channel up and down buttons
9To move the cursor and select
the option needed
10 OK To confirm the selected option
To open the system setting menu
of the LCD Display
11 MENU Opens menu
12 BACK Return to previous screen
13 AV/TV To select the signal sources
like TV, video
14 EPG To open EPG menu
15 SUBT To display subtitles
16 INFO To display system information
17 TEXT To open the function
of TELETEXT
18 HOLD To hold a current page
on screen
19 PGDN To select TEXT for viewing
the next page
20 PGUP To select TEXT for viewing
the previous page
12
3
4
6
7
8
5
10
11 12
9
13
14
17
18
21
22
25
16
15
20
19
24
23
2726
2928
30
35 Chapter Backwards
36 Chapter Forwards
37 Scan backwards
38 Scan forwards
34
38
31
35
36 37
32 33

7
INPUTS & CONNECTIONS
REAR CONNECTIONS
Selecting Input Source
To switch between the different connections
is very easy.
1) Press [AV/TV] - The following will appear
2) Press [\/] or [/\] to select the input you
require.
3) Press [OK]
Use to connect to TV
Aerial to receive
analogue TV or
Digital/Freeview
TV stations
POWER DC 12V
SCART
PC AUDIO
VGA
AUDIO
VIDEO
S-VIDEO
RF IN
DVBT IN
DVBT OUT
A
B
C
D
E
F
G
H
I
J
Power Input
SCART Input
PC Audio Input
VGA Input
Audio Input
Video Input
S-Video Input
TV Aerial Input
DVB-T Input
DVB-T Output
POWER SCART PC AUDIO VGA AUDIO VIDEO S-VIDEO RF IN DVBT IN DVBT OUT
DC 12V
SOURCE MENU
DVB
TV
AV
S-VIDEO
SCART
DVD
VGA
Use Scroll on
remote control to
select input source
and press OK
G H I J
POWER SCART PC AUDIO VGA AUDIO VIDEO S-VIDEO RF IN DVBT IN DVBT OUT
DC 12V

8
DVB-T MODE MENU OPERATION
PICTURE SETTINGS
Lets you adjust the contrast, brightness,
colour and sharpness temperature to
enhance the viewing experience.
Adjusting Contrast
Adjust the balance between black & white
1) Press [MENU] to enter menu
2) Press [\/] to select Contrast
3) Then press [>] or [<] to increase
or decrease the contrast
4) Press [MENU] twice to exit
Adjusting Brightness
Increase or decrease the brightness
of the picture
1) Press [MENU] to enter menu
2) Press [\/] twice to select Brightness
3) Then press [>] or [<] to increase
or decrease the brightness
4) Press [MENU] twice to exit
Adjusting Colour
Alter the Red, Green & Blue which make
up the picture
1) Press [MENU] to enter menu
2) Press [\/] 3 times to select Color
3) Then press [>] or [<] to increase or decrease
the color
4) Press [MENU] twice to exit
Adjusting Hue
1) Press [MENU] to enter menu
2) Press [\/] 4 times to select Hue
3) Then press [>] or [<] to increase or decrease
the colour
4) Press [MENU] twice to exit
Adjusting Sharpness
Increase or decrease the sharpness of the picture
depending on signal strength. If you have a poor
signal strength you should reduce the sharpness
to get a better picture.
1) Press [MENU] to enter menu
2) Press [\/] 5 times to select Sharpness
3) Then press [>] or [<] to increase or decrease
the sharpness
4) Press [MENU] twice to exit

9
DVB-T MODE MENU OPERATION
PICTURE SETTINGS
- CONTINUED
Adjusting Colour Temperature
There are 4 settings - User, Cool, Middle,
Warm.
1) Press [MENU] to enter menu
2) Press [\/] 6 times to select Color
temperature
3) Then press [>] or [<] to switch between
Cool, Middle, Warm and User (to adjust
User refer to step 3a)
3a) When User is showing Press [OK]
you can then adjust the C.T.R, C.T.G,
C.T.B. (Red, Green & Blue), by moving
down to the relevant colour using [\/]
or [/\] and adjusting using [>] or [<]
4) Press [MENU] 3 times to exit
Advance Picture Adjustment
You can on this TV make some advance picture
adjustments.
Dynamic Noise Reduction (DNR)
Reduces the interference in the picture
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance Picture
Adjustment
3) Press [OK] to enter the Advance Graphic
Settings—Dynamic Noise Reduction
4) Then press [>] or [<] to switch between Low,
Middle, Strong & Off
5) Press [MENU] 3 times to exit
Black Level Extender
Alters the darkness of the black within picture
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance Picture
Adjustment
3) Press [OK] to enter the Advance Graphic Settings.
4) Press [\/] to select Black Level Extender
5) Then press [>] or [<] to switch between On & Off
6) Press [MENU] 3 times to exit

10
DVB-T MODE MENU OPERATIONS & PICTURE SIZE / FORMAT
PICTURE SETTINGS
- CONTINUED
White Peak Limitor
Limits the amount of white within a picture
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance
Picture Adjustment
3) Press [OK] to enter the Advance
Graphic Settings.
4) Press [\/] 3 times to select White
Peak Limitator
5) Then press [>] or [<] to switch
between On & Off
6) Press [MENU] 3 times to exit
Dynamic Colour Enhancement (CTI)
Switch on or off the feature that
automatically enhances the colour
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance
Picture Adjustment
3) Press [OK] to enter the Advance
Graphic Settings.
4) Press [\/] 4 times to select CTI
5) Then press [>] or [<] to switch between
Low, Middle, Strong & Off
6) Press [MENU] 3 times to exit
Flesh Tone Adjustment
Alters the pinkness in the peoples faces and skin
covering
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance Picture
Adjustment
3) Press [OK] to enter the Advance Graphic Settings.
4) Press [\/] 5 times to select Flesh Tone
5) Then press [>] or [<] to switch between On & Off
6) Press [MENU] 3 times to exit
Adaptive Luna Control
Increases or decreases the light within the picture
1) Press [MENU] to enter menu
2) Press [\/] 7 times to select Advance Picture
Adjustment
3) Press [OK] to enter the Advance Graphic Settings.
4) Press [\/] 6 times to select Adaptive Luma Control
5) Then press [>] or [<] to switch between On & Off
6) Press [MENU] 3 times to exit

11
DVB-T MODE MENU OPERATION
SOUND SETTINGS
Lets you adjust the bass, treble
and balance to enhance the viewing
experience.
Adjusting Bass
Increase or decrease the bass within
the sound.
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] twice to select bass
4) Then press [>] or [<] to increase
or decrease the bass
5) Press [MENU] twice to exit
Adjusting Treble
Increase or decrease the treble within
the sound.
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] 3 times to select treble
4) Then press [>] or [<] to increase
or decrease the treble
5) Press [MENU] twice to exit
Adjusting Balance
To switch the sound between the left and right
speakers
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] 4 times to select balance
4) Then press [>] or [<] to increase or decrease
the balance
5) Press [MENU] twice to exit
Selecting Surround Sound
Switches on and off the sound which comes from
around the room
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] 5 times to select surround
4) Then press [>] or [<] to switch on or off the
surround sound
5) Press [MENU] twice to exit

12
DVB-T MODE MENU OPERATIONS
Adjusting Reverb
Lets you select various pre-set
sound settings
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] 6 times to select Reverb
4) Then press [>] or [<] switch between
Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church & Off
5) Press [MENU] twice to exit
Adjusting Equalizer
Lets you select various pre-set
sound settings
1) Press [MENU] to enter menu
2) Press [>] to go to Sound menu
3) Press [\/] 7 times to select Equalizer
4) Then press [>] or [<] switch between
Pop, Live, Dance, Techno, Classic,
Soft, Rock & Off
5) Press [MENU] twice to exit
GENERAL SETTINGS
Adjusting Language
Choose between English, Deutsch,
Francais, Espanol and Italiano
1) Press [MENU] to enter menu
2) Press [>] twice to go to General menu
3) Press [\/] to select Language
4) Then press [>] or [<] to change
between the languages
5) Press [MENU] twice to exit
OSD Timer
Lets you adjust the amount of time the
OSD stays on the screen.
1) Press [MENU] to enter menu
2) Press [>] twice to go to General menu
3) Press [\/] twice to select OSD Timer
4) Then press [>] or [<] to increase
or decrease the time
5) Press [MENU] twice to exit

13
DVB-T MODE MENU OPERATIONS & ELECTRONIC PROGRAM GUIDE (EPG)
GENERAL SETTINGS
- CONTINUED
Switching back to Default
1) Press [MENU] to enter menu
2) Press [>] twice to go to General menu
3) Press [\/] 4 times to select default
4) Then press [OK]
5) Press [MENU] twice to exit
The Electronic Program Guide is
available in DVB-T mode. It is a 7 day
TV guide and provides information
about forthcomming programs (where
supported by the broadcasted channel).
You can view the start and end time of all
programs and on all channels for the next
7 days.
It is very simple to operate.
1) Press [EPG]. The following will appear
2) Press [CH+] or [CH-] to select channel
you wish to see information about
3) Press [\/] or [/\] to move through
the programs for the day highlighted
4) Press [>] or [<] to move through
the days of the week
In the top right hand corner will appear
information about the program you have
selected
5) Press [BACK] to exit EPG.
Blue Menu
Lets you choose if you would like a blue
background or not
1) Press [MENU] to enter menu
2) Press [>] twice to go to General menu
3) Press [\/] twice to select OSD Timer
4) Then press [>] or [<] to switch between
on and off
5) Press [MENU] twice to exit

14
DVB-T CHANNEL SETTINGS MENU
Within Digital (DVB-T) mode there is also
a channel settings menu. This is provided
so you can search for new channels,
create favourite lists and apply a pin code
to limit access.
The menu is very user friendly.
Channel List
1) Press [DVB-MENU] the above will appear
2) Press [OK]
This tells you various information about
each channel
To delete stations
Press [\/] or [/\] to select the station
Press [YELLOW] to delete the stations.
To rename stations
Press [\/] or [/\] to select the station
Press [GREEN] to enter the rename
station.
To lock stations
You may wish to lock a channels so they
can’t be viewed - i.e. Adult content.
Press [\/] or [/\] to select the station
Press [BLUE/CYAN] to lock the selected
channel
Enter the pin code and then press [OK]
3) Press [DVB-MENU] twice to exit
Create/Edit Favourite List
1) Press [DVB-MENU]
2) Press [\/] to select favourite list
3) Press [OK]
You can create favourite lists for up to 5 users
4) Press [\/] or [/\] to select the station you wish to add.
It will be highlighted in orange.
5) Press [OK] to add
Repeat this process until you have added all the
channels you want
You can store up to 100 stations in the favourite list
6) Press [RED] to move the next Favourite list.
7) Press [DVB-MENU] twice to exit
To use the favourite list. Press [FAV] and select the
list you require to use.
Search for New Channels
Every so often new channels are launched on digital.
You can search for these as follows.
1) Press [DVB-MENU]
2) Press [\/] twice to select Channel Search
3) Press [OK]
4) Press [OK] to start search
When it has finished it will return to digital TV
5) Press [DVB-MENU] twice to exit.

15
DVB-T CHANNEL SETTINGS & ADJUSTING THE PICTURE FORMAT / SIZE
System Settings
1) Press [DVB-MENU]
2) Press [\/] 3 times to select System
Settings
3) Press [OK]
On Screen Display Transparency
Press [OK] and then [>] to increase
or [<] to decrease the transparency
First Time Installation
Press [\/] to highlight First Time
Installation, Press [OK]. You will then
be prompted on screen. Press [<] to
highlight OK and then press [OK]
System Info
You may be asked by a service engineer
which version of software your TV has.
Press [\/] twice
Press [OK]
Change Pin Code
Press [\/] 3 times
Press [OK]
Enter old pin code
(default is 888888)
Enter new pin code
Enter again
Press [OK] to confirm
4) After you have finished with this menu
press [DVB-MENU] twice to exit menu
Picture Size / Format
Your television has been factory set to show the
correct picture format depending on the signal being
received by the broadcast TV station.
If you wish to change the picture format.
1) Press [DVB-MENU]
The following menu will be displayed
2) Press [\/] 4 times to select Picture Settings
3) Press [OK] to select
4) Press [<] or [>] to select either 4:3 or 16:9
5) Press [OK] to accept settings
6) Press [DVB-MENU] to exit.

16
TV MODE MENU OPERATION
TUNING SETTINGS
Lets you search for channels, manual tune, fine
tune, adjust setting if taking aboard, change
channel order and name channels
Adjusting Region
If you are moving the TV to another country you
will need to change the region. The TV’s default
is UK.
1) Press [MENU] to enter menu
2) Press [>] 3 times to go to Tuning menu
3) Press [\/] to select region
4) Then press [>] or [<] to change between
the regions
5) Press [MENU] twice to exit
Searching (Auto Search/Update Search)
Scan for all channels based on the current
settings
1) Press [MENU] to enter menu
2) Press [>] 3 times to go to Tuning menu
3) Press [\/] twice to select searching
4) Then press [ENTER] the TV will now tune
in the channels
5) The program edit screen will now appear
6) To swap a channel Press [RED]
Move to the location you would like to place it
Press [OK]
Repeat the process with all channels.
Press [MENU] to exit
Manual Scan
You may wish to manual search if you can’t find a certain
channel, or if you want to connect to a Satellite/Cable b
ox via RF/Aerial connector
1) Press [MENU] to enter menu
2) Press [>] 3 times to go to Tuning menu
3) Press [\/] 3 times to select manual scan
4) Then press [OK] to enter this menu
5) Select the channel you would like to tune by pressing [>]
or [<]. This will increase the channel number.
6) Press [\/] to select Start From and then press [>] or [<]
to change the frequency you would like to start tuning from
7) Press [\/] to select Start Search and Press [OK]
to start scan.
Fine Tuning
You may wish to fine tune in order to improve the picture
quality
1) Press [MENU] to enter menu
2) Press [>] 3 times to go to Tuning menu
3) Press [\/] 5 times to select Fine Tune
4) Press [OK] to menu this menu
5) Press [>] or [<] to adjust frequency and fine tune the TV.
6) Press [MENU] twice to exit

17
TV MODE MENU OPERATION
TUNING SETTINGS
— CONTINUED
Program Edit / Channel Naming
Some channels are automatically named,
however you may wish to change
the name the channel is called.
1) Press [MENU] to enter menu
2) Press [>] 3 times to go to Tuning menu
3) Press [\/] 6 times to select Program
Edit
4) Press [OK] to enter menu
5) Go to channel and press [OK]
6) Highlight the PR Name using the [\/]
or [/\] and press OK
7) Select the name you require by using
the arrow buttons [>][<][\/][/\] and
the [OK] to confirm the letter.
8) Press [MENU] 3 times to exit

18
TV MODE TELETEXT OPERATION
Teletext is a service offered by some
broadcasters which is provided
with the video and audio signals.
Teletext Operation
1) Press [TEXT], after a few seconds
teletext page 100 should appear.
Here is an example of BBC1
2) You can now navigate to the page
you require in a number of ways:
a) Press the page you require using
the number buttons i.e. page 302,
by pressing [3][0][2]
b) Press the colour buttons, these will
take you to page indicated on screen
for each colour
c) Press [CH+] or [CH-] these will
take you to next page. i.e. if you
are on page 150 and you press
[PGDN] the page will switch to 149
3) To exit Teletext press [TEXT] twice
at any time
Other buttons
[SIZE] this increases or decreases the
size of the text on screen
[INDEX] some pages are more than one
page long this button displays
the number of pages
[REVEAL] if there is answer or something
hidden this will display it
[SUBPAGE] displays the sub page
if it exists