Gazepoint Vesa Mount User manual
Vesa Mount
Assembly
Instructions
Page 1
www.gazept.com
Vesa Mount Kit includes:
VESA Rods (2)
VESA Arms (2)
Black M4 Thumbscrews (6)
6-32 1/2" Washer Screws (4)
3M Adhesive Strips (4)
* Assembly requires #2 phillips screwdriver
We recommend that you first install the Gazepoint installer software
before mounting the eye tracker.
The VESA Mount allows you to mount a Gazepoint
eye tracker directly to your computer monitor.
You can either use the VESA mounting holes on the back of a
monitor or the 3M Adhesive strips (provided) to attach the bracket
to your monitor.
1
Attach VESA Arms to VESA Rods using 6/32 1/2" Washer Screws. These are
pre-threaded to the VESA Rods and will have to be removed. For 100mm VESA
Mount holes, ensure that the VESA Rods are oriented so that the lower bends are
away from the centerline and the VESA Arms bend towards
the centerline, as shown in the diagram.
6-32 1/2" Washer Screws
Gazepoint Research Inc.
418 – 2912 West Broadway
Vancouver B.C.
V6K 0E9 Canada
T +1 408 883 4293 (GAZE)
Wwww.gazept.com
Vesa Mount Assembly
Instructions
Page 2
2
Attach the GP3 or GP3 HD eye tracker to the VESA Arms in the top
holes using 2 of the M4 Thumbscrews. The thumbscrews are
pre-threaded in the VESA Arms and will have to be removed first.
3
Attach USB power and data cables to the GP3 or GP3 HD
eye tracker.
www.gazept.com
Gazepoint Research Inc.
418 – 2912 West Broadway
Vancouver B.C.
V6K 0E9 Canada
T +1 408 883 4293 (GAZE)
Wwww.gazept.com
Vesa Mount Assembly
Instructions
Page 3
4
Holding the eye tracker unit, hook the VESA Rods underneath the lower
monitor bezel and behind the monitor. Position eye tracker so that it is
centered on the screen, pointed at an upwards 45º angle and can be as
close as possible to lower monitor bezel.
5
Align with VESA holes and use 4 Black M4 Thumbscrews to affix into
place. If VESA holes are not available on your monitor, affix 3M Adhesive
Strips to the VESA Rods using two for each rod and mount the VESA Rods
to the back of your monitor with the adhesive strip.
Option 2
3M Adhesive Strips
Option 1
Thumbscrews
www.gazept.com
Gazepoint Research Inc.
418 – 2912 West Broadway
Vancouver B.C.
V6K 0E9 Canada
T +1 408 883 4293 (GAZE)
Wwww.gazept.com
Vesa Mount Assembly
Instructions
Page 4
6
Plug in the USB power and data cables to your computer.
7
Position yourself so that the monitor/eye tracker is 65cm (25”) away and
40cm (15”) below you eye level. Angle the eye tracker so that it points
upwards towards your face.
Gazepoint VESA Mount setup is now complete.
Help: For more information on your Eye Tracker or Vesa Mount, please
www.gazept.com
Gazepoint Research Inc.
418 – 2912 West Broadway
Vancouver B.C.
V6K 0E9 Canada
T +1 408 883 4293 (GAZE)
Wwww.gazept.com
65 cm
40 cm
