Installing the Drip tray to the
floorstand (Skip this step if you do not
have a drip tray)
1. Use a screwdriver to remove the
mounting plate attached to the
front of the floorstand.
2. Mount the drip tray to the front of
the floorstand using the screws
from the floorstand.
a. It is important that you
use the original screws
from the floorstand
when mounting the
drip tray.
3. Mount the dispenser normally
using the driptray as the new
mounting plate.
Installing the Dispenser to the Floorstand
1. Remove the mounting plate from the
back of the dispenser
a. Gently pull the mounting
plate tab away from the
dispenser and pull down on
the mounting plate to remove
it
2. Slide the dispenser onto the mounting
plate that is attached to the floorstand.
Press down until the dispenser snaps into
place.
a. If the dispenser is hard to press
down, make sure that the
grooves of the dispenser are
properly aligned with the
grooves of the mounting plate