Grolf Smart Lithium Electric Lawn Mower User manual

Instruction Manual for Smart
Lithium Electric Lawn Mower
Version:2.0
Three Gears
Adjustable
One Key
Always Open
Power Display

Gear Adjustment Button
Gear Speed Display
Battery Level Display
Motor
Security lock
Power Switch

Lithium electric lawn mower parts list
Battery Charger
Wrench Backing Plate Screw
Round Alloy Blade One Word Blade
Carrying Handle Fender

Installation Notes
①:Take out the fuselage and install the grass baffle.
Insert the grass baffle into the machine head with the four
grooves corresponding.
Rotate the fender clockwise to align the snap points.
②:Remove the backing plate screw that holds the blade in
place.
③:Placing spacers and blades.

④:Screw on the backing plate screw.
⑤:Use a wrench to fix the screw on the shaft,and then use
a special wrench to tighten the screw.
！
Be sure to lock the
screw securely to
hold the blade in
place to prevent the blade
from falling out during use.
⑥:To install the handle，remove the handle screw.
Fix the handle on the pole，adjust the position and tighten
the screw.
When removing the handle screw, pay attention to the
screw shown on the left, do not lose it.

⑦:Install the battery and adjust the motor.
⑧Start using.
Note: When starting to use, pay attention to the position
of the motor to prevent injury to yourself and others.
Function Description
①:One key always open.
Press and hold
for 3 seconds
After the function is turned on, short press the safety lock
and power switch to shut down.

②:Gear Adjustment.
1:7000r/min.Suitable for mowing
young grass.
2:15000r/min.Suitable for
cutting straw.
3:20000r/min.Suitable for
pruning shrubs
③:Charging Display.
Red Light:Charging
Green Light:Fully Charged
Related questions
①:Blade comes off.
Check blade installation status
Click the gear adjustment button.
Fully Charged 2-3 hours

UK/REP
Company name: KOVA ASSOCIATES LTD
Contact Person：Louisa Timms
Address: 72a Kingston Road, Portsmouth, Hampshire,
PO2 7PA, United Kingdom
Email: [email protected]
②:Remove the battery
Step 1:Hold the machine
Step 2:Press the battery button
Step 3:Push the battery out
1
2
3