Hanover HANFR4/SC-1070-6SEC-V2 User manual

Page 2 of 6
ASSEMBLY INSTRUCTIONS
HANFR4/SC-1070-6SEC-V2 - 5pc Seating Set
Please read through these instructions before beginning assembly.
- Clear out the space for assembly and lay out all parts based on parts list. Extra room will allow you to easily
determine if all the pieces are present.
- Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
- Keep small parts and pieces away from children until fully assembled.
- Do not fully tighten the screws until all have been inserted and hand tightened.
- Check for any loose screws and tighten them before use.
- Do not stand or jump on the chair as it may cause injury.
- Weight limit of each chair/ottoman: 250lbs

Page 3 of 6
PARTS LIST
A
Armless Chair Back
Panel
2 pcs
J
Hex Key
1 pc
B
Armless Chair Seat
2 pcs
K
Chair Seat Cushion
4 pcs
C
Corner Chair Back
Panel 1
2 pcs
L
Chair Back Cushion
(Big One)
4 pcs
D
Corner Chair Back
Panel 2
2 pcs
M
Chair Back Cushion
(Small One)
2 pcs
E
Corner Chair Seat
2 pcs
N
Ottoman Cushion
1 pc
F
Bolt M6x35mm
24 pcs
O
Ottoman Top Panel
1 pc
G
Bolt M6x30mm
6 pcs
P
Ottoman Side
Panel
2 pcs
H
Washer
30 pcs
Q
Clip
8 pcs
I
Bolt Cover
30 pcs
ASSEMBLY FOR ARMLESS CHAIR
Step 1 Step 2
Repeat the steps for the second armless chair.

Page 4 of 6
ASSEMBLY FOR CORNER CHAIR
Step 1 Step 2
Step 3
Repeat the steps for the second corner chair.

Page 5 of 6
ASSEMBLY FOR OTTOMAN
Step 1 Step 2
Connect chairs with clips and place cushions onto chairs.