Happy Beds Stockwell 4 Drawer Chest User manual

1
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to reposition.
Keep any sharp objects away from this product.
Stockwell 4 Drawer Chest
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Page of 7
Vendor: S000350
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Note : To secure the item to the wall, hardware G ( 2 pcs ) and L ( 2 pcs ) are not provided.
01
02
03
04
05 06
07
8
09
10
11
12
11
13
H
09
10
11
12
11
13
H
10
11
12
11
13
H
10
11
12
11
13
H
8
2
Parts List Hardware List (BOX 1)
Part Descripion Qty Part Description Qty
01 1
Top panel
02
03
04
05
06
07
08
09
Bottom panel
Drawer front (Up)
Drawer back
Drawer side
Drawer bottom
1
1
1
1
1
2
2
3
Side panel ( Left )
Side panel ( Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I1
I2
M6 x 60mm CSK Cap Wood screw
18
18
18
10
4
1
50
8
32
4
8
8
8
8
A1
A3
J1
J2
Back panel M3.5 x 16mm C.B Screw
PCV Handle 7050.96
Allen key M4
M4 x 25mm C.B Screw
M4 x 38mm C.B Screw
10
Drawer front (Down)
1
8'' x 1'' PP tape 2
Wall plug -
K
L
Back bone
Middle bone
8
4
2
11
12
13 Drawer bone
Stud 192
Stud 192 screw
14'' Drawer slide (Left / Right)
14'' Drawer slide (Left / Right)
Box
2
2
1
1
2
2
2
2
1
1
1
1
1
12
22
6
5/8 PCV Nail LegM

3
Page of 7
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, E, F, H, J1 and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J1 J1
J1
F
01
03
04
05
06
10
08
09
H
H
A2
A2
A2
A2
A2
A1
A1
B
B
03 04
13
A1
x4
x4
x2
x2 x3
x4
A2
A1
B
x2 x3
x4
x2
x2
A1 x4
x4 x2
x2
x8
Ex8 Ex8 Ex8
Mx6
02

Vendor: S000350
Step 2: Attach middle bone (5) and back bone (6) to side panel (3) and (4) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach side panel (3) and (4) to top panel (1) using hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Insert back panel (7) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1 A2
A1
A3
03
04 06
05
A1
A2
A3
A1
03
04
05
06
01
07
06
03
01
04
A3 x 6
A3 x 4

Vendor: S000350
Step 5: Attach bottom panel (2) to side panel (3) and (4) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
I1
I2
Step 6: Attach hardware I1 into top panel (1), bottom panel (2), side panel (3) and (4) using hardware I2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach drawer bone (13) to drawer front (8) and drawer back (10) and another drawer bone (13) to
drawer front (9) and drawer back (10) using hardware A1 and A2 with a screwdriver (not provided).
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
C
D
A1 A2
A1
A3
03
02
07
06
01
04
03
02
04 01
07
06
08 09
10
10
13 13
C x 4
D
I1 x 8
I2 x 8
A3 x 8

Vendor: S000350
Step 8: Assemble the drawer components using hardware E, G and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
J2
E
E
E
E
E
E
Step 9: Assemble the drawer components using hardware E, G and J2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
E
E
E
E
E
J2
J2
J2
J2
J2
J2
J2
J2
J2
J2
J2
( L/R )
J2 x 4
E x 12
G x 16
( L/R )
J2 x 4
E x 12
G x 16
08
13
10
11
G
12
13
10
11 08
12
13
10
11 08
11
G
x4
x4
12
13
10
08
11
09
13
10
11
12
13
10
11 09
12
13
10
11 09
11
G
Gx4
x4
12
13
10
09
11

Vendor: S000350
G
K
L
1.
K
E
2.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
J2
J1
J1
J2
Step 11: To secure the item to the wall use hardware G, K and L using a screwdriver (not provided).
Then attach hardware part K to top panel (1) using hardware E with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
04
08
08
09
09
E x 2
G x 2
K x 2
L x 2

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes