HealTech Electronics GIPRO GPXT Instructions and recipes

GIPRO X-TYPE GEAR INDICATOR
Supplementary Manual
Aprilia Tuono 2006-2010 (GPXT + GPX-U01)
www.healtech-electronics.com 1/2
Remove the main seat.
Lift up or remove the fuel tank.
Locate the speed sensor connector.
Route the GPX cable through the top
opening of the dust boot.
Connect the GPX Red wire to the Red
wire of the speed sensor connector.
(Transparent, 3-pole connector in dust boot
behind the water reservoir tank)
Connect the GPX White wire to the
Gray/White wire of the speed sensor
connector.
(Transparent, 3-pole connector in dust boot
behind the water reservoir tank)

GIPRO X-TYPE GEAR INDICATOR
Supplementary Manual
Aprilia Tuono 2006-2010 (GPXT + GPX-U01)
www.healtech-electronics.com 2/2
Connect the GPX Black wire to the
Blue/Orange wire of the speed sensor
connector.
(Transparent, 3-pole connector in dust boot
behind the water reservoir tank)
Connect the GPX Green wire to the
Blue/Yellow wire of the Camshaft
Position Sensor connector.
(Black, 3-pole connector on the cylinder
head at the left)
Typical position for the gear indicator.
Secure the unit properly.