HOME8 C13013US User manual

What’s inside:
Elder Care Ultra-Secure
Starter Kit
Quickstart Guide
What you’ll need:
Model No. C13013US
1x Ethernet cable
2x Power cables
• Broadband Internet • iPhone or Android phone • Home router
1x Security Shuttle 1x Twist HD camera 1x Panic button2x Activity trackers
2x Power adapters 1x Lanyard

1-10 ft
Step 1: Assemble your hardware
Step 2: Set up your smartphone
Unpack all of your hardware within 1-10 feet of your home router.
• Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable
• Connect Security Shuttle and Twist HD cameras to power adapters and plug them in
Your phone will disrupt the setup process if it goes to sleep. So before you register your devices,
disable the autolock feature on your smartphone. You can enable it after you’ve set up your system.
Next:
• Connect your smartphone to your home Wi-Fi
• Download the Home8 app from the App Store or Google Play
• Follow the on-screen instructions and set up your account

Step 3: Mount your devices
Before you use mount your cameras, see if they’re within Shuttle’s range.
• Take your cameras to the rooms you want to install use them in
• Open the app, tap Video. If you see video, you can mount the camera.
• Press the panic button. If you receive a push notification, you’re in range.
• Give your activity tracker a good shake, then navigate to > Device Management > Activity
Sensor on your mobile app. The time stamp will update if your tracker is in range.

Need help installing your Home8 system?
Troubleshooting Tips
Are your devices listed in your app?
Are your devices communicating with Security Shuttle?
Do you need to reset your camera?
• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s closer
to Security Shuttle and try again.
• If they do connect, you’ll know the range of your device and where to install a range extender.
• Alternatively, you can move Security Shuttle closer to your device.
• If your devices still don’t communicate with Security Shuttle, even when they’re in the same room, navigate to >
Device Management > +on the Home8 app to add your devices again.
If you’re having trouble installing your devices, see if they’re listed in your Home8 app:
• Navigate to > Device Management to see if all your devices are listed
• Tap +next to the device category and follow the on-screen instructions to add any missing devices
If your camera isn’t communicating with Security Shuttle, your app may ask you to reset your camera.
• Remove the top cover and locate the pinhole
• Insert a pin and hold for 3-5 seconds until you hear a beep
• Return to the app and follow the onscreen instructions
Call 1-844-800-6482, Mon-Fri 9am-7pm, Pacific.
http://www.home8systems.com/faq/
[email protected]
99200235MIG V1.0