IntelliView IVT-MTS05 User manual

© 2015 IntelliView Technologies Inc
Note: Please read this manual thoroughly before operating this unit
and retain it for future reference.
IVT-MTS05
[e-mail]
www.intelliview.ca
Software Version 3.14
System Console (SC)
User Guide

SC User Guide — V3.14
[e-mail]
ii
Welcome
Congratulations on your purchase of the System Console (SC) developed
by IntelliView Technologies Inc. This product has been designed to simplify
surveillance operations of any scale, from one camera to thousands at
various various locations worldwide. The device is a unique event-only alert
system that optimizes security and monitoring resources.
If you require any support with set-up or operation of your SC please
contact IntelliView at:
Phone: [phone] or 1-888-922-9235
Email: [e-mail]
This guide has been prepared for users intending to
utilize the full range of features of the SC working with the
SmrtHVR. If the SC will be only used for monitoring, refer
to the Quick Start Guide for fast setup instructions.
Note: Please thoroughly read this guide before operating the SC to ensure
ease of operations, utilization to full benets, and avoidance of damage to
the product.
Record of SC
For your permanent records and for warranty
purposes, please record your SC Model
and Serial numbers below. Both can be found
on the product’s back panel on the right hand side.
Model No.
Serial No.
Date of Purchase

SC User Guide — V3.14
www.intelliview.ca
iii
[e-mail]
About This Manual
This manual provides extensive details to assist with the set up and
operation of this new SC.
The SC is an advanced network based intelligent video surveillance solution
that is designed to utilize new or existing analog and IP video camera
installations through the IntelliView SmrttHVR (hybrid video recorder) or
SmrtNVR (network video recorder). The system utilizes the capabilities of
the these intelligent video recorders to provide distributed video analytics
capabilities that can be controlled and monitored over a standard IP
network via the SC video management software.
Information in this document has been carefully researched and checked
for accuracy before publication. However, no guarantee is given as to the
accuracy of the contents. To benet our customers, corrections will be made
as necessary in subsequent versions of the SC manual. The information
contained in this document is subject to change without notice.
Warning
Please ensure that only the devices and components provided with your SC
be used with the system. Any additional parts or
components must be supplied from approved manufactures or authorized
dealers. The use of unapproved components may cause system damage.
The original components are designed and manufactured for compliance
with FCC Class B compliance (for detailed information refer to page v).
Legal Considerations
Due to privacy laws, the use of camera surveillance may be prohibited. This
may vary with use of the SC from country to country or even within certain
regions. Hence, it is highly recommended that you review local legislation in
the area where the IntelliView product will be used for surveillance purposes
to limit liability.

SC User Guide — V3.14
[e-mail]
iv
Intellectual Property Rights
IntelliView has intellectual property rights relating to technology embodied in
the product described in this document.
This publication contains information protected by copyright laws. No part
of it may be reproduced, transmitted, transcribed or translated into any
language without written permission from the copyright holders.
The IntelliView video surveillance technology is very unique and as such
holds various patents. The following is a list of the patents that have been
granted to IntelliView:
The IntelliView solutions are:
Copyrighted for both IntelliView and its licensors
All rights reserved
Protected by U.S. Patents: 7,612,666; 7,616,782
Patents Pending in the U.S. and other countries.
IntelliView, HASM, IntelliView logo, SmrtHVR, Smart Camera (SC) Station,
SmrtSummary are either registered trademarks or trademarks of IntelliView
Technologies Incorporated in the United States and/or other countries.
Liability
Every effort has been taken to ensure accuracy in the preparation of this
manual. If you detect any inaccuracies or omissions, please inform your
local IntelliView re-seller or sales representative. IntelliView will not be held
legally responsible for any errors and reserves the right to make changes to
the product and manuals without prior notice.
IntelliView provides no warranty of any kind in regards to the material
contained within this document. This does not inuence the warranties
provided for the SC equipment, software, as well as the system integrity
when used within its prescribed guidelines.
IntelliView will not be liable or responsible for incidental or consequential
damages in connection with the installation, performance or use of this
material.

SC User Guide — V3.14
www.intelliview.ca
v
[e-mail]

SC User Guide — V3.14
[e-mail]
vi
Table of Contents
1: Introduction ............................................................. 2
1.1 The Benets of Using the SC ....................................................... 2
1.2 IntelliView’s SC Features.............................................................. 3
1.3 Compression Technology ............................................................. 3
1.4 Alarm Function.............................................................................. 4
1.5 Voice Recognition and Control ..................................................... 4
1.6 System Connectivity ..................................................................... 5
2: SC Interface Overview......................................................................... 8
2.1 SC Settings Reset ........................................................................ 9
2.2 SC Interface.................................................................................. 9
2.5 Black Screen (Bandwidth Saving) Mode .................................... 12
2.3 Managing Users.......................................................................... 13
2.3.1 Startup.................................................................................. 13
2.3.2 Users Settings...................................................................... 13
2.4 Live Camera Feed Selection and View Options ........................ 16
2.4.1 Changing Live Camera Panel Layout .................................. 16
2.4.2 Changing Camera Viewing Mode Between Single (full screen)
and Multiple View ............................................................................ 17
2.4.3 Viewing Live Camera on Auto Rotation................................ 18
2.4.4 Manually Switching Video Screens in the Video Panel........ 18
2.4.5 Video Feed Quality Adjustments .......................................... 18
2.4.6 Color Coded Video Screens................................................. 19
3: Analytics & Alarm Rules ................................................................... 22
3.5.1 Types of Standard Analytics Rules....................................... 22
3.5.2 Types of Specialized Analytic Rules..................................... 24
3.1 Types of Regions ........................................................................ 26
3.1.1 Drawing a Box Analytic Region............................................ 27
3.1.2 Drawing a Polygon Analytic Region .................................... 28
3.1.3 Drawing a One-Way Trip Wire.............................................. 29
3.1.4 Drawing a Two-Way Trip Wire ............................................. 29
3.1.5 Changing the Shape of an Analytic Rule ............................. 29
3.2 Analytic/Alarm Rule Management............................................... 30
3.2.1 Adding and Updating Rules ................................................. 31
3.2.2 The Rule Properties Panel ................................................... 32
3.2.3 Rule-Specic Options........................................................... 35
3.3 Rule Scheduling ......................................................................... 39
3.4 Auto Illumination Change Compensation.................................... 40
3.5 Object Size Settings for Detection.............................................. 41
3.6 Rule Coupling ............................................................................. 42
3.7 Enabling/Disabling Analytics For Each Camera ......................... 45
3.8 Externally-Triggered Alarms (Digital IO) ..................................... 46
3.9 Remote Email Settings ............................................................... 47

SC User Guide — V3.14
www.intelliview.ca
vii
[e-mail]
4: Camera Management & Controls ..................................................... 51
4.1 Camera Sites.............................................................................. 51
4.1.1 Adding and Managing Sites ................................................. 51
4.2 Cameras ..................................................................................... 54
4.2.1 Adding and Editing Cameras ............................................... 54
4.2.2 Camera Icons and Status .................................................... 57
4.3 PTZ Camera Controls................................................................. 57
4.3.1 Controlling PTZ Cameras with the Mouse ........................... 58
4.3.2 Programming PTZ Movement ............................................. 59
4.3.3 Programming PTZ Camera Presets..................................... 63
........................................................................................................ 63
5: Alarm Management and Reporting .................................................. 66
5.1 Alarms Display............................................................................ 66
5.1.1 Viewing Alarm Snapshot Images ......................................... 67
5.1.2 Viewing Pending Alarm Images .......................................... 67
5.1.3 Viewing Detailed Alarm Information ..................................... 68
5.1.4 Showing/Hiding Analytics Overlay Data in Alarm Video
Playback ......................................................................................... 69
5.2 Alarms Always On Top ................................................................ 69
5.3 Speak Alarm Function................................................................. 70
5.4 System Event Notications ......................................................... 70
5.5 Creating and Exporting Count Reports....................................... 71
5.6 Modbus....................................................................................... 73
6: Video Management ............................................................................ 76
6.1 Enabling Recording of Alarm Videos .......................................... 76
6.1.1 Storage Limit Settings ......................................................... 77
6.2 Playing Videos from the Alarms Panel ...................................... 77
6.3 Viewing Pending Alarm Videos................................................... 78
6.4 Viewing Archived Videos .......................................................... 79
6.5 importing Archived Videos and Alarm Videos from the SmrtHVR
........................................................................................................... .82
6.6 Using SmrtSummary to Quickly Review Long Archived Videos . 83
6.6.1 Overview .............................................................................. 83
6.6.2 Using SmrtSummary ........................................................... 84
6.6.3 Vertical vs. Horizontal Video Analysis .................................. 86
6.6.4 Building a SmrtSummary Report.......................................... 87
6.6.5 Saving and Loading a SmrtSummary Report....................... 90
6.6.6 Building an Optimized Report .............................................. 91
6.6.7 Viewing a SmrtSummary Report.......................................... 93

SC User Guide — V3.14
[e-mail]
viii
7: Additional Accessories ..................................................................... 97
7.1 Using the IntelliView Joystick...................................................... 97
7.2 Access Control (SmrtLOCK)....................................................... 98
7.2.1 Setting Up Access Control: .................................................. 98
7.2.2 Accessing SmrtLOCK Settings ............................................ 99
7.2.3 Locking / Unlocking Doors for a Camera ............................. 99
7.2.4 Adding a Card Reader ....................................................... 100
7.2.5 Setting Up a Card Reader Schedule.................................. 101
7.2.6 Setting Up an Unlock Schedule for Unrestricted Access ... 102
7.2.7 Setting Up a Holiday Schedule .......................................... 102
7.2.8 Adding a Card Reader Prole and Assigning a Schedule . 103
7.2.9 Adding Access Card Users ............................................... 105
7.2.10 Copying a Single User to Another SmrtHVR ................... 106
7.2.11 Copying Access Control Settings & Databases to Another
SmrtHVR and Access Controller ................................................... 107
8: System Technical Specs & Maintenance Information...................111
8.1 SC Technical Specications....................................................... 111
8.2 Troubleshooting ........................................................................112
8.3 System Maintenance .................................................................114

SC User Guide — V3.14
www.intelliview.ca
ix
[e-mail]
List of Figures
Figure 1 - SC & IntelliView system network................................................5
Figure 2 - System Reset Button and options .............................................9
Figure 3 - The SC Interface......................................................................10
Figure 4 - Low Bandwidth Mode - with alarm showing in Channel 2.......12
Figure 5 - Login box .................................................................................13
Figure 6 - Users settings ..........................................................................13
Figure 7 - User Security Privileges dialog box ........................................14
Figure 8 - Add Monitoring Station User dialog box...................................15
Figure 9 - Selecting user site access .......................................................15
Figure 10 - Editing user info or deleting users.........................................16
Figure 11 - Layout tab in Control Panel...................................................17
Figure 12 - Switching between different layouts.......................................17
Figure 13 - Switching video screen panels...............................................18
Figure 15 - Color-coded vIdeo screen info bar.........................................19
Figure 14 - VIdeo adjustment controls .....................................................19
Figure 16 - A rectangular area of effect. ...................................................26
Figure 17 - Examples of polygon areas....................................................27
Figure 18 - Polygon drawn as a rounded shape ......................................27
Figure 19 - Drawing a square or rectangle shape ....................................27
Figure 20 - Drawing a polygon with .........................................................28
Figure 21 - One-way trip wire ...................................................................29
Figure 22 - Rule Wizard button ...............................................................30
Figure 23 - The Alarm Rule Setup dialog box. .........................................30
Figure 24 - Rule List panel - for adding, editing, and deleting rules .........31
Figure 25 - Rule Properties panel ............................................................33
Figure 26 - Loitering: Rule Shape with time. ............................................35
Figure 27 - Selecting the source of input from the drop-down menu. ......35
Figure 29 - Alarm frequency option with minimum voltage setting. .........36
Figure 28 - Reader# drop-down menu for SmrtLOCK Access Control....36

SC User Guide — V3.14
[e-mail]
x
Figure 32 - Conguring the Color Match Rule..........................................37
Figure 31 - Conguring Modbus from the Alarm Rule dialog ...................37
Figure 30 - Port # with KMH .....................................................................37
Figure 33 - Temperature in Region settings .............................................38
Figure 34 - Rule schedule setup ..............................................................39
Figure 35 - Object detection settings panel..............................................40
Figure 36 - Object size setup screen........................................................41
Figure 37 - Rule Wizard button ................................................................42
Figure 38 - Coupling button......................................................................43
Figure 39 - Rule Coupling for combining rules to create a set of sophisti-
cated alarms.............................................................................................43
Figure 40 - Enabling/disabling rules from the Rule List panel ..................45
Figure 41 - External input alarm trigger settings. .....................................46
Figure 42 - Remote Email Settings ..........................................................47
Figure 44 - Site dialog box .......................................................................51
Figure 43 - Add Site button in Site and Camera panel.............................51
Figure 45 - Stream types (Site dialog box)..............................................52
Figure 46 - Changing user access ...........................................................53
Figure 47 - Delete Site button and conrmation dialog ............................53
Figure 48 - Add Cameras tab ...................................................................54
Figure 49 - Add Camera dialog box..........................................................55
Figure 50 - Edit Camera dialog box..........................................................56
Figure 51 - Camera icons and status .......................................................57
Figure 52 - On-screen PTZ Controls ........................................................58
Figure 53 - PTZ settings tab.....................................................................59
Figure 54 - Advanced PTZ settings dialog box.........................................61
Figure 55 - Alarms panel ..........................................................................66
Figure 56 - Request Queue list for pending alarm images.......................67
Figure 57 - Alarm Detail window...............................................................68
Figure 58 - The Overlay Settings in the SmrtHVR ...................................69
Figure 60 - Events Panel..........................................................................70
Figure 59 - Alarm Always on Top and Speak Alarms features..................70