JT T60 User manual

T60 Matrix Lamp
User Manual V1.0
2022.05

Using this Manual
Legend
Warning Important Tips Reference
Download DJI PILOT App
DJI PILOT App is needed to use this product. Scan the
QR code below to install DJI PILOT.
Cautions
Cautions during operation
Do not look directly into the spotlight
1.
2.
3.
4.
5.
6.
7.
8.
9.
Do not cover the rear cover heatsink or deform the heatsink structure.
Please do not interfere with the stability and calibration of the Gimbal.
Do not touch the main body of the lamp head with bare hands.
Please try to avoid using the equipment for a long time in extreme environments to
extend the service life of the equipment.
This product is a high power-consumption device, pay attention to heat when using it.
Please put the device into the special safety box for T60 after use to avoid damage
from scratches or collisions with hard objects.
When cleaning the surface of the lamp, be sure to wipe it with a soft cleaning cloth.
Please do not interfere with the stability and calibration of the Gimbal.
2/11
The international version of products have locked GPS and can not be used in China (including
Chinese Mainland, Hainan Island, Hong Kong, Macao and Taiwan).
10.

Contents
Using this Manual ........................................................................................................... 2
Legend .........................................................................................................................2
Download DJI PILOT App ................................................................................................2
Cautions..........................................................................................................................2
Contents...............................................................................................................3
Introduction........................................................................................................4
T60..................................................................................................................................4
Part Name ......................................................................................................................4
Installation and Preparation...................................................................................5
Supported Aircraft .........................................................................................................5
Mounting T60.................................................................................................................5
Gimbal Control ...............................................................................................................6
DJI PILOT Controls ...............................................................................................7
Connect DJI Pilot APP ......................................................................................................7
Function Lists .................................................................................................................7
Function Settings.................................................................................................................9
Function Description.............................................................................................10
Upgrade.........................................................................................................................10
Important Items................................................................................................................10
Appendix.............................................................................................................11
Specifications ................................................................................................................11
3/11

Introduction
T60
T60 Hybrid earchlight, equipped with two sets of optical lenses, can illuminate a 16° uniform light column,
whose illumination distance is more than 150m and search area is more than 150 ㎡at the height of 50m.
Adapted to the standard quick-release bracket. A controllable gimbal which can support pan tilt linkage
with the gimbal camera. Support DJI Pilot, brightness adjustment, strong light flash and other modes.
Part Name
1. DJI SDK port
Connect Matrice 30 series.
2. Quick-Release Bracket
Install payload
3. Cooling Fan
The wind of the high-efficiency cooling fan to reduce the lamp temperature.
4. Light Units
Provide long-distance illumination and search.
5. Gimbal
0 to-85°controllable; Support pitch with the gimbal cameara.
6. T-ypec port
Connect other payloads.
1
3
1
2
4
5
用
于
协
助
安
装
P
6
用
于
协
助
安
装
P
4/11

Installation and Preparation
Supported Aircraft
1.Aircraft：Matrice 30.
2.Please upgrade your aircraft to the latest firmware.
3.Make sure that the aircraft is ready for operation before mission; Firstly turn on the
remote controller and then turn on the aircraft.
Mounting the T60
Mounting to the Aircraft
1. Slide Stand B into Stand A until you hear a "click" to ensure it is locked.
2. Connect the payload cable to the aircraft SDK interface.
3. The above operations are carried out while the aircraft keeps shutdown; Firstly open the
remote controller and then start the flight.
1
2
A
B
5/11

Gimbal Control
1．Dial 1
Control the tilt angle of the gimbal
2．Dial 2
Control the pan tilt angle
6/11

DJI PILOT Controls
Connect DJI Pilot APP
1. Turn on the aircraft, remote controller, and ground mobile equipment;
2. When connected，DJI PILOT will indicate the payload JZ_T60；
7/11

Function Lists
Light Adjustment Real Time Data
Switch of pithching with gimbal camera Brightness Adjustment Flash Control
Gimbal Adjustment
8/11

Function Settings
1 LED Control
Light on/off
2 Light Brightness
Brightness Adjustment
3 Flash Control
Flash on/off
4 Flash Frequency
Flash frequency adjustment.
5 LED Control Test
For each light tests.
9/11

Upgrade
1. T60 supports online upgrades with M30.
2. Download DJI Assistant 2 app in your computer and connect M30 to the computer.
Download Address:https://www.dji.com/cn/matrice-30/downloads。
3. Select the firmware that needs to be upgraded.
4. Wait until it is finished.
Important Items
1.During installation, the gimbal needs to be placed in the correct direction before connecting;
2. DJI pilot may display occasionally, restart the software when it happens;
3.It is normal for the gimbal to swing slightly, but it will return to normal after power-on or
attitude synchronization;
4.When the gimbal has high-frequency noise and vibration while getting very hot, do not use it.
Contact the after-sales to return to the factory for repair.
Function Description
10/11