KENNAMETAL KenTIP Installation guide

kennametal.com
KenTIP
™
ASSEMBLY INSTRUCTION MANUAL

kennametal.com
Wrench noses must t into the chip grooves. Wrench blades must t into insert slots.
Internal coolant is
recommended for
all applications.
Flood coolant only
for drilling depth
≤3 x D.
Dry cutting is not
recommended. MQL
ability is limited.
1. Protect your eyes and hands.
Fix holder. Clean pocket with
air blast.
2. Put insert into pocket seat so it
rests rmly on the holder.
3. Turn slightly in clockwise
direction using your ngers.
4. Set wrench properly onto insert: Wrench noses must t rmly into the chip grooves. *For unmounting, rmly press
wrench on insert to avoid slipping.
Mounting
Mini-Wrench • ∅6–7,999mm
K-Wrench and Multi-Wrench • ∅8–26mm
Available Smart Wrenches
Mini-Wrench K-Wrench Multi-Wrench
Coolant Core Deviation
Stationary Drill/Lathe
123
4
4
5
✓ ✓
max 0,02mm
max 0,02mm
Machining Center
4. Set wrench properly onto insert: Wrench blade must t rmly into slots on insert anks.
*
Modular Drills
KenTIP™FS Application Notes • Insert Mounting