KRESS KG756E Installation manual

Cordless Lawn Mower KG756E KG756E.X
SAFETY AND OPERATING MANUAL

2
Cordless Lawn Mower KG756E KG756E.X
ORIGINAL INSTRUCTION
PRODUCT SAFETY
GENERAL SAFETY
WARNINGS
WARNING Read all
safety warnings and
all instructions. Failure to
follow the warnings and
instructions may result in
electric shock, re and/or
serious injury.
Carefully read the
instructions for the
safe operation of the
machine.
Save all warnings and
instructions for future
reference.
- This appliance is not
intended for use by
persons (including
children) with reduced
physical, sensory or
mental capabilities,
or lack of experience
and knowledge, unless
they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
- Children should be
supervised to ensure that
they do not play with the
appliance.
- The appliance is only to
be used with the power
supply unit provided with
the appliance.
IMPORTANT
READ CAREFULLY
BEFORE USE
KEEP FOR FUTURE
REFERENCE
Safe operation practices
Training
a) read the instructions
carefully. Be familiar with
the controls and the proper
use of the equipment;
b) never allow children or
people unfamiliar with
these instructions to use
the lawnmower. Local
regulations can restrict the
age of the operator;
c) never mow while people,
especially children, or pets
are nearby;
d) keep in mind that the
operator or user is
responsible for accidents
or hazards occurring
to other people or their
property
Preparation
a) While mowing, always
wear substantial footwear
and long trousers. Do not

3
Cordless Lawn Mower KG756E KG756E.X
operate the equipment
when barefoot or wearing
open sandals;
b) thoroughly inspect the
area where the equipment
is to be used and remove
all objects which can be
thrown by the machine;
c) Before using, always
visually inspect to see that
the blades, blade bolts
and cutter assembly are
not worn or damaged.
Replace worn or damaged
blades and bolts in sets to
preserve balance. Replace
damaged and unreadable
labels.
Operation
a) mow only in daylight or in
good articial light;
b) avoid operating the
equipment in wet grass,
where feasible;
c) always be sure of your
footing on slopes;
d) walk, never run;
e) for wheeled rotary
machines, mow across the
face of slopes, never up
and down;mow across the
face of slopes, never up
and down.
f) exercise extreme caution
when changing direction
on slopes;
g) do not mow excessively
steep slopes;
h) use extreme caution when
reversing or pulling the
lawnmower towards you;
i) stop the blade(s) if the
lawnmower has to be
tilted for transportation
when crossing surfaces
other than grass, and
when transporting the
lawnmower to and from
the area to be mowed;
j) never operate the
lawnmower with defective
guards , or without safety
devices, for example
deectors and/or grass
catchers, in place;
k) switch on the motor
carefully according to
instructions and with
feet well away from the
blade(s);
l) do not tilt the lawnmower
when switching on the
motor, except if the
lawnmower has to be tilted
for starting. In this case,
do not tilt it more than
absolutely necessary and
lift only the part which is
away from the operator;
m)do not put hands or feet
near or under rotating

4
Cordless Lawn Mower KG756E KG756E.X
parts. Keep clear of the
discharge opening at all
times;
n) not to touch the blades
before the disabling device
has been removed and
the blades have come to a
complete stop;
o) Do not start the
lawnmower when standing
in front of the discharge
opening.
p) Do not transport the
lawnmower while the
power source is running.
q) Stop the lawnmower,and
remove the disabling
device. Make sure that all
moving parts have come to
a complete stop.
– whenever leaving the
machine unattended,
– before clearing a blockage,
– before checking, cleaning
or working on the machine,
– after striking a foreign
object. Inspect the
machine for damage
and make repairs before
restarting and operating
the lawnmower
If the lawnmower starts to
vibrate abnormally (check
immediately)
- inspect for damage.
- replace or repair any
damaged parts.
- check and tighten any
loose parts.
Maintenance and storage
a) keep all nuts, bolts and
screws tight to be sure
the equipment is in safe
working condition;
b) check the grass cacher
frequently for wear or
deterioration;
c) replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
d) Be careful during adjusting
of the lawnmower to
prevent entrapment of the
ngers between moving
blades and xed parts of
the lawnmower.
e) Always allow the
lawwnmower to cool down
before storing.
f) When servicing the blades
be aware that, even
though the power source
is switched off, the blades
can still be moved.
Safety Warnings for
battery pack
a)Do not dismantle,
open or shred cells or
battery pack.

5
Cordless Lawn Mower KG756E KG756E.X
b)Do not short-circuit
a battery pack. Do
not store battery
packs haphazardly
in a box or drawer
where they may short-
circuit each other or
be short-circuited by
conductive materials.
When battery pack is not
in use, keep it away from
other metal objects, like
paper clips, coins, keys,
nails, screws or other small
metal objects, that can
make a connection from
one terminal to another.
Shorting the battery
terminals together may
cause burns or a re.
c) Do not expose battery
pack to heat or fire.
Avoid storage in direct
sunlight.
d) Do not subject battery
pack to mechanical
shock.
e) In the event of battery
leaking, do not allow
the liquid to come into
contact with the skin
or eyes. If contact
has been made, wash
the affected area
with copious amounts
of water and seek
medical advice.
f) Keep battery pack
clean and dry.
g) Wipe the battery
pack terminals with a
clean dry cloth if they
become dirty.
h) Battery pack needs to
be charged before use.
Always refer to this
instruction and use
the correct charging
procedure.
i) Do not maintain
battery pack on charge
when not in use.
j) After extended
periods of storage,
it may be necessary
to charge and
discharge the battery
pack several times
to obtain maximum
performance.
k) Recharge only with
the charger specified
by Kress. Do not use
any charger other
than that specifically
provided for use with
the equipment.
l) Do not use any battery
pack which is not
designed for use with
the equipment.
m)Keep battery pack

6
Cordless Lawn Mower KG756E KG756E.X
out of the reach of
children.
n) Retain the original
product literature for
future reference.
o) Remove the battery
from the equipment
when not in use.
p) Dispose of properly.
q)Do not mix cells of
different manufacture,
capacity, size or type
within a device.
r) Keep the battery away
from microwaves and
high pressure.
SYMBOLS
Read instruction handbook before
operation this machine
Keep bystanders away.
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off- Remove disabling
device before maintenance
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Do not burn
Li-Ion battery This product has
been marked with a symbol
relating to ‘separate collection’
for all battery packs and battery
pack. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Battery
packs can be hazardous for the
environment and for human health
since they contain hazardous
substances.
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
Wear protective gloves.
Remove battery from the socket
before carrying out any adjustment,
servicing or maintenance.
Remove the key
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them

7
Cordless Lawn Mower KG756E KG756E.X
3
1
2
4
5
7
6
8
9
10
13
11
12

8
Cordless Lawn Mower KG756E KG756E.X
B3B2
B1A
C2C1
2
1

9
Cordless Lawn Mower KG756E KG756E.X
F4F3
ED
14
15
F2F1
100%
0%
16
17

10
Cordless Lawn Mower KG756E KG756E.X
J1
I
H
J2
7 — 80mm
6 — 70mm
5 — 60mm
4 — 50mm
3 — 40mm
2 — 30mm
1 — 20mm
2
1
G2G1
1
1

11
Cordless Lawn Mower KG756E KG756E.X
N
KL
L-1
L-2
L-3
M
20
19
18

12
Cordless Lawn Mower KG756E KG756E.X
COMPONENT LIST
1. OPERATING BAIL
2. HANDLE BAR
3. BATTERY PACK COVER
4. LED HEADLIGHT
5. FRONT HANDLE
6. CUTTING HEIGHT ADJUSTMENT POINTER
7. CUTTING-HEIGHT ADJUSTMENT LEVER
8. REAR HANDLE
9. SAFETY FLAP
10. GRASS COLLECTION BAG
11. QUICK-RELEASE BUTTON
12. SWITCH BUTTON FOR LED HEADLIGHT
13. SAFETY LOCK-OUT BUTTON
14. REAR SIDE-DISCHARGE CHUTE * (SEE
FIG. D)
15. MULCHING INSERT (SEE FIG. E)
16. BATTERY PACK * (SEE FIG. F1)
17. SAFETY KEY (SEE FIG. F3)
18. BLADE NUT (SEE FIG. M)
19. BLADE (SEE FIG. M)
20. SPACER (SEE FIG. M)
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type KG756E KG756E.X (7- designation
of machinery, representative of Cordless Lawn
Mower)
KG756E KG756E.X ***
Voltage 60V Max **
No load speed 2800 /min
Deck width 48 cm
Cutting width 46 cm
Front wheel diameter 200 mm
Rear wheel diameter 230 mm
Cutting height 20 – 80 mm
Cutting height positions 7
Grass collection capacity
55 L
Battery type Lithium-Ion
Machine Weight (bare tool) 24.1 kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 60 volts. Nominal voltage
is 54 volts.
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant changes
between these models.
SUGGESTED BATTERIES
AND CHARGERS
Category Model Capacity
60V Battery
KA3002 4.0Ah
KA3008 5.0Ah
60V Charger KA3714 5.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE DATA
A weighted sound pressure LpA = 79.8 dB(A)
KpA 3.0 dB (A)
A weighted sound power LwA = 91.3 dB(A)
KwA 3.0 dB (A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration ah<2.5 m/s²
Uncertainty K = 1.5 m/s²
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.

13
Cordless Lawn Mower KG756E KG756E.X
Using the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such
as the times when the tool is switched off and when it
is running idle but not actually doing the job. This may
signicantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
OPERATION INSTRUCTION
NOTE: Read instruction handbook before
operation this machine.
INTENDED USE
This product is intended for domestic lawn mowing.
BEFORE OPERATION:
Lifting the Handle bar (See Fig. A)
Press and hold quick-release button during operation.
Assembling the grass collection bag to the lawn
mower (See Fig. B1, B2, B3)
NOTE: Depress the grass collection bag slightly to
ensure that it is completely installed.
Removing/emptying grass collection bag (See
Fig. C1, C2)
WARNING! Always check the safety ap close the
discharge outlet before using. Never lift the safety
ap when the lawn mower is being used without tted
grass collection bag.
Installing the rear side-discharge chute (Sold
Separately) (See Fig. D)
Removing grass collection bag, then install rear side-
discharge chute in.
Installing the mulching insert (See Fig. E)
Removing grass collection bag or rear side-discharge
chute, then install the mulching insert in.
Checking the battery charge condition (See Fig.
F1)
NOTE: Fig. F1 only applies for the battery pack with
battery indicator light.
The battery level can be determined by pressing the power
indicator button beside the battery lights. Press the button
before and after each use to check the battery.
Remarks LED-light Battery condition
Five green
lights are
illuminated.
70% ≤ Power level
Four green
lights are
illuminated.
50% ≤ Power level < 70%
Three green
lights are
illuminated.
35% ≤ Power level < 50%
Two green
lights are
illuminated.
20% ≤ Power level < 35%
One green
light are
illuminated.
10% ≤ Power level < 20%
No light is
illuminated. Power level < 10%
Charging the battery pack (See Fig. F2)
- Your battery pack is partly charged and needs to be fully
charged before rst use.
- More details can be found in charger’s manual.
Installing & removing the battery pack (See Fig.
F3, F4)
Insert the safety key before installing the battery pack.
NOTE: Depress the battery release button to release
battery pack from your tool. After recharging, insert
the battery pack into tool’s battery port until you hear
a “click”. A simple push and slight pressure will be
sufcient.

14
Cordless Lawn Mower KG756E KG756E.X
OPERATION
Starting and Stopping (See Fig. G1, G2)
Press the Safety lock-out button, then the push Operating
bail to start. Release the operating bail to stop.
NOTE: For starting, press both the Safety lock-out button
and the Operating bail at the same time.
MULCHING MOWING TIPS
While mulching, your new mower is designed to cut the
grass clippings into small pieces and distribute them
back into the lawn. Under normal conditions, the mulched
grass will biodegrade quickly and deliver nutrients to the
lawn. Please review the following recommendations for
optimum mulching performance.
1) Avoid mowing when the grass is wet from rain or dew.
Wet grass may form clumps which interfere with the
mulching action and reduce the runtime. The best
time to mow the grass is in the late afternoon when
the grass is dry and the newly cut area will not be
exposed to direct sunlight.
2) For the best mulching performance, set the cutting
height to remove about one third of the grass blade
length, ideally no more than 40mm at one time. If the
lawn is overgrown, it may be necessary to increase
the cutting height to reduce the pushing effort and
prevent overloading the motor. For extremely heavy
mulching, it is advisable to rst cut at a high cut
height setting, and then re-cut to the nal cut height.
Otherwise, make narrower cuts and mow slowly.
3) For the best performance, keep the mower housing
free of built-up grass. From time to time turn off
mower and wait for the blades to come to a complete
stop. Then unplug the safety key, remove the batteries
and turn mower on its side. Using an object such as a
stick, wipe out any accumulation of grass around the
blade area. Be careful of the sharp edges of the blade.
Ensure to clean the blade area often when cutting
wet or new grass and every time after the machine is
used.
4) Certain types of grass or grass conditions may
require that an area be mulched a second time to
fully disperse the grass throughout the lawn. If cutting
a second time, it is advisable to cut perpendicular
(across) the rst cut pattern. DO NOT CHANGE
CUT PATTERN IN ANY WAY THAT WOULD CAUSE
MOWING DOWN A HILL.
5) Change your cutting pattern from week to week. This
will help prevent matting and graining of the lawn.
6) Do not mow on a slope that has an angle of greater
than 15
o
.
CUTTING AREA
The cutting area can be affected by several factors, such
as cutting height, lawn humidity, grass length and density.
Besides, starting and stopping the mower too many times
during operation will reduce the cutting area.
It is ideal for mowing up to 1200m²lot sizes.
TIPS:
1) It is recommended to mow your lawn more frequently,
walk at normal pace, and not to start/stop the mower
too often during operation.
2) For best performance, please ensure use two fully
charged battery packs at the same time and always
cut off 1/3 or less of the grass height.
3) Walk slowly when cutting long grass, so as to have
more effective cutting and properly discharge the
clippings.
4) Avoid cutting wet grass, otherwise it will stick to the
underside of the deck and the clippings cannot be
collected or discharged properly.
5) A higher cutting height shall be applied to new or
thick grass and it will extend the battery duration.
Adjusting the cutting height (See Fig. H)
Press and hold Cutting-height adjustment lever. Adjust
the cutting height up and down.
WARNING! Stop, release operating bail and wait
until the motor stops before adjusting height. The
blades continue to rotate after the machine is switched
off, a rotating blade can cause injury. Do not touch
rotating blades.
Opening the LED headlight (See Fig. I)
Press the switch button for LED headlight.
AFTER OPERATION:
STORAGE (See Fig. J1, J2)
Stop the mower and always unplug the safety key and
remove the batteries. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do not use
water, solvents or polishes. Remove all grass and debris,
especially from the ventilation slots.
Turn the machine on its side and clean the blade area. If
grass cuttings are compacted in the blade area, remove
with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, Press and hold quick-release button and
fold the handle bar.
MAINTENANCE
WARNING: Stop the mower and unplug the safety
key and remove the batteries before removing the
grass collection bag.
NOTE: To ensure long and reliable service, perform the
following maintenance procedures regularly. Check for
obvious defects such as a loose, dislodged or a damaged
blade, loose ttings, and worn or damaged components.
Check that the covers and guards are all undamaged and
are correctly attached to mower. Carry out any necessary
maintenance or repairs before operating mower. If the
mower should happen to fail despite regular maintenance,
please call our customer helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES NOT CUT
GRASS CLEANLY OR MULCH PROPERLY.

15
Cordless Lawn Mower KG756E KG756E.X
WEAR PROPER EYE PROTECTION WHILE
REMOVING, SHARPENING, AND INSTALLING
BLADE. ENSURE THAT SAFETY KEY IS
REMOVED.
Sharpening the blade twice during a mowing season
is usually sufcient under normal circumstances. Sand
causes the blade to dull quickly. If your lawn has sandy
soil, more frequent sharpening may be required.
REPLACE BENT OR DAMAGED BLADE
IMMEDIATELY.
WHEN SHARPENING THE BLADE (See Fig. K)
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade to keep
it balanced, removing equal amounts of material from
both ends.
NOTE:
1. Be sure the mower is turned off and unplug the safety
key, remove the batteries.
2. Place the mower in stand up storage mode.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing center hole in blade
L-1 over a screwdriver shank L-2, clamped horizontally
in a vise L-3. If either end of the blade rotates downward,
le that end. Blade is properly balanced when neither
end drops.
BLADE MAINTENANCE (See Fig. M, N)
Replace your Mower Blade after 50 hours mowing or 2
years, which ever is the sooner-regardless of condition.
Follow these procedures to remove and replace the
Blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the Blade.
Make sure safety key and batteries are not installed.
Wedge a block of wood between the blade and the
mower deck to prevent the blade from turning and
unscrew the Blade Bolt counter-clockwise using a
spanner wrench, and then remove the Blade.
To re-assemble, position the Blade with the cutting edges
towards the ground. Then securely tighten the Blade Bolt.
TROUBLESHOOTING
PROBLEM SOLUTION
1. Mower doesn’t
run when Operating
Bail is activated.
A. Check to make sure safety
key has been installed and is
fully seated and thatSafety
lock-out button is being
completely pushed.
B. Release Operating Bail to
turn mower off. Unplug the
safety key and remove the
batteries, turn mower over
and check that blade is free
to turn. If not free, return to
an authorized servicer. Blade
should turn freely.
C. Has battery been fully
charged? Plug in charger and
wait for green light to come
on. For starting, press both
the Safety lock-out button and
the Operating bail at the same
time.
(See Fig.G1)
2. Motor stops while
mowing.
A. Release Operating Bail to
turn mower off. Unplug the
safety key and remove the
batteries,turn mower over
and check that blade is free
to turn. If not free, return to
an authorized servicer. Blade
should turn freely.
B. Raise cutting height of
wheels to highest position and
start mower.
C. Has battery been fully
charged? Plug in charger and
wait for green light to come
on.
D. Avoid overloading the
mower. Slow down the cutting
pace by pushing mower
slower or raise the cut height.
Or both.
3. Mower runs but
cutting performance
is unsatisfactory, or
does not cut entire
lawn.
A. Has battery been fully
charged? Plug in charger and
wait for green light to come on.”
B. Release Operating Bail to turn
mower off. Unplug the safety key
and remove the batteries. Turn
mower over and check: Blade for
sharpness - Keep blade sharp.
Deck and discharge chute for
clogging.
C. Wheel height adjustment may
be set too low for grass condition.
Raise cutting height.
4. Mower is too hard
to push.
A. Raise cutting height to
reduce deck drag on grass.
Check each wheel for free
rotation.

16
Cordless Lawn Mower KG756E KG756E.X
5. Mower is
abnormally noisy
and vibrates.
A. Release Operating Bail
to turn mower off. Unplug
the safety key and remove
the batteries. Turn mower
on side and check blade to
ensure it has not been bent or
damaged. If blade is damaged,
replace with a replacement
blade. If the underside of
the deck is damaged return
mower to an Authorized
service center.
B. If there is no visible
damage to the blade and the
mower still vibrates: Release
Operating Bail to turn mower
off, Unplug the safety key and
remove the batteries, and
remove blade. Rotate blade
180 degrees and retighten.
If mower still vibrates, return
the mower to an authorized
service center.
6. Battery charger
LED’s not on.
A. Check plug connection.
B. Replace charger.
7. Battery charger
LED does not ip to
green.
A. Battery needs to be
diagnosed. Take to authorized
service center.
8. Mower not
picking up clippings
with the Grass
Collection Bag.
A. Remove mulch plate when
bagging.
B. Chute clogged. Release
Operating Bail to turn mower
off. Unplug the safety key and
remove the batteries. Clear
chute of grass clippings.
C. Too much cut grass. Raise
cutting height of wheels to
shorten length of the cut.
D. Bag full. Empty bag more
often.
9. When mulching
there are clippings
visible.
A. Too much cut grass. Raise
cutting height of wheels to
shorten length of the cut. Do
not cut off more than 1/3 of
total length.
B. Check blade for sharpness.
Always keep blade sharp.
10. Low or
diminished run-time
after many uses
A. Return to Authorized
Service location - may need
new battery.
11. The battery
charger LED ashes
red and the battery
can’t be charged.
A. The battery overheats after
continuous use. Remove
battery from the charger and
allow it to cool to 42°C or less.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.

17
DECLARATION OF
CONFORMITY
we,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Battery powered Lawn Mower
Type KG756E KG756E.X (7- designation of
machinery, representative of Battery- powered
Lawn Mower)
Function cutting grass
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/
EU&(EU)2015/863, 2000/14/EC amended by
2005/88/EC
The notied body involved
Name: Intertek Deutschland GmbH (Notified body
0905)
Address: Stangenstraße 1, 70771 LEINFELDEN-
ECHTERDINGEN
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex VI
- Measured Sound Power Level 91 dB(A)
- Declared Guaranteed Sound Power Level 94 dB(A)
Standards conform to
EN 60335-1, EN 60335-2-77, EN 62233,
EN ISO 3744, EN 55014-1, EN 55014-2
The person authorized to compile the technical le,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2022/01/18
Allen Ding
Deputy Chief Engineer, Testing & Certication
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R.

18
Cordless Lawn Mower KG756E KG756E.X
DECLARATION OF
CONFORMITY
We,
Positec (UK & Ireland) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
On behalf of Positec declare that the product
Description Battery powered Lawn Mower
Type KG756E KG756E .X (7- designation of
machinery, representative of Cordless Lawn
Mower)
Function cutting grass
Complies with the following regulations:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic
Equipment Regulations
Noise Emission in the Environment by Equipment
for Use Outdoors Regulations
Conformity assessment procedure as per SCHEDULE 9
Measured Sound Power Level 91 dB(A)
Declared Guaranteed Sound Power Level 94 dB(A)
The notied body involved
Name: Intertek Testing and Certification Ltd
Address: Academy Place,1-9 Brook
Street,Brentwood, Essex, CM14 5NQ, United
Kingdom
Standards conform to,
BS EN 60335-1, BS EN 60335-2-77, BS EN 62233, BS
EN ISO 3744, BS EN 55014-1, BS EN 55014-2
The person authorized to compile the technical le,
Name: Jim Kirkwood
Address Positec (UK & Ireland) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
2022/01/18
Allen Ding
Deputy Chief Engineer, Testing & Certication
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R.

Copyright © 2022, Positec. All Rights Reserved.
AR01582501