L.L.Bean LR1alb User manual

An L.L. Bean Exclusive Product
Hearthside Log Rack – Large
With Fatwood Holder
Model LR1alb
Quality ● Craftsmanship ● Style
Made in the USA
Enclume log racks are an excellent choice
WARNING: PLEASE READ ALL OF THE
INSTRUCTIONS BEFORE ASSEMBLING AND
USING YOUR RACK.
All of our hammered steel racks are finished with an industrial acrylic finish designed to provide years of protection to the
rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a
commercial wax product.
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
easier. The parts and hardware included are:
Hardware included:
4 – 3/8” x 5/8” Button head screws
4 – 3/8” x ½” Button head screws
1 – 7/32” Allen wrench
4 – Hard Glides
Components included:
2 – Upright Body Pieces
2 – Legs
1 – Fatwood/Kindling Holder Bar
2 – Fatwood/Kindling Holders
It is important that your rack is assembled correctly. If the unit is
assembled or used incorrectly, it could become unstable and
collapse, possibly causing injury.
WARNING

ASSEMBLY INSTRUCTIONS for the L.L. Bean Hearthside Log Rack – Large
Model LR1alb
Enclosed you will find everything needed
for the assembly of your log rack. Two
people make assembly easier. The parts
and hardware included are:
Hardware included:
4 – 3/8” x 5/8” Button head screws
4 – 3/8” x ½” Button head screws
1 – 7/32” Allen wrench
4 – Hard Glides
Components included:
2 – Upright Body Pieces
2 – Legs
1 – Fatwood/Kindling Holder Bar
2 – Fatwood/Kindling Holders
Rack Assembly:
1) Slip the four hard glides over the end of the two legs.
2) Align the two upright body pieces so the uprights with two holes for the fatwood/kindling holder
bar are at the same end.
3) Place the two upright body pieceson top and perpendicular to the legs. Using the enclosed Allen
wrench and the four 3/8” x 5/8” button head screws, attach the uprights onto the legs. The screws
are inserted from the top down toward the floor. Tighten the screws only finger tight.
4) Attach the fatwood/kindling holder bar to the upright body pieces using two of the 3/8” x ½”
button head screws and the Allen wrench.
5) Attach the two fatwood/kindling holders to the fatwood/kindling holder bar using the other two
3/8” x ½” button head screws and the Allen wrench.
6) Square up your new log rack and tighten all the screws firmly.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing injury
WARNING