Laser SmartHome LSH-STAR-P1 User manual

User Manual
Starlight Projector
LSH-STAR-P1

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• Starlight Projector
• USB Cable
• Power Adapter
• User Manual

Input Voltage
and Current:
50Hz/60Hz AC 100
~ 240V 150mA(max)
Power Input: 5V 1A(max)
Laser Class: Class 1
Cable Length: 1.8m
Operating Temperature:
Radio Technology:
Storage Temperature:
Wireless Technology:
Software Requirements:
Dimensions:
Weight:
-10oC- 40oC
-20oC- 70oC
IEEE 802.11B/G/N,
Bluetooth 4.2
IOS 8.0 or Android 4.1
and higher
Wi-Fi 2.4GHz
162 x 162 x 68mm
Approx. 500g
SPECIFICATIONS

PRODUCT DIAGRAM
1
2
3
1. Laser Projector Lens
WARNING: Do not look directly at the Laser or Light
projector lens. Place the device in a location where
the lens may not accidentally be viewed by others.
2. Light Projector Lens
3. Function Button

Function Button Controls
• Tap to turn Starlight Projector On.
Note: In this manual we cover the EZ pairing
mode instructions.
• Fast Flashing = EZ pairing mode.
• Slow Flashing = AP pairing mode.
There are 2 flashing states
• Tap up to 5 times to cycle between 5 different
lighting/projection modes.
• Tap a sixth time to turn Starlight Projector Off.
• Press and hold the function button for approx.
10 seconds for network pairing mode. The blue
light around the function button will start to flash.

Getting Started
with the App
1. Install the Laser SmartHome
App for your Smartphone from
the iOS App Store or
Google Play store.
2. Log in with an existing
Laser SmartHome account
or create a new account

Connecting to
the App
1. Turn on the Bluetooth
function on your Smartphone.
2. Press and hold the “Function button” on the
Starlight Projector till you get a
fast-flashing blue light.

3. Open the Laser SmartHome
App and tap the “+” icon to
add a device.
4. Select “Add” under
“Discovering Devices”.
Connecting to
the App
continued...

5. Tap the “+” icon next to the
Starlight Projector
6. Enter your Wi-Fi details
Connecting to
the App
continued...

7. Wait for
the Starlight
Projector to
finish pairing
8. When finished pairing the
device will appear on the
Laser SmartHome App
home screen.
Connecting to
the App
continued...

9. Tap the image icon to enter
the main control screen for the
Starlight Projector where you
will be able to control it in
more detail.
NOTE: If you are unable to pair
successfully with the Starlight
Projector, please check your
Wi-Fi password and make sure
you are only using a 2.4GHz
Wi-Fi connection. 5GHz
connections are not supported.
Connecting to
the App
continued...

Adding Laser SmartHome
to the Google Home App
• Open the Google Home App.
• In the “Google Home” main screen, select the
“+” icon to set up device.

Adding Laser SmartHome
to the Google Home App
• Select “Set up device” to add new device,
then select “Works with Google”.
continued...

Adding Laser SmartHome
to the Google Home App
• A list will appear showing a search function to
access more apps: from here, search for the
Laser SmartHome App.
continued...

• Log into your Laser
SmartHome account
with your email address.
• Click “Done” and then
it will give you a list of
commands available.
• When successfully
linked, you will see the
Starlight Projector on your
“Home Control” screen.
• You can now control
your device through
Google Home
• Once linked, it will show
the devices linked to your
account: you can assign
them to rooms. You will
be prompted to authorize
apps to sync.
Adding Laser SmartHome
to the Google Home App
continued...

TROUBLESHOOTING
• Make sure your smartphone and the Starlight
Projector are connected to the same
Wi-Fi connection.
I can’t turn the Starlight Projector
ON/OFF using the App.
• Check the Starlight Projector has a fast-flashing
blue light. If the light is flashing slowly, press and
hold the “Function button” for 10 seconds to switch
to a fast-flashing blue light.
• Check you are only connecting to a 2.4GHz
Wi-Fi network. 5GHz networks are not supported.
• Check the Wi-Fi password you are using is correct.
If unsure, try connecting another device to the
same Wi-Fi network using that password. If that
device fails to connect also then you may be using
an incorrect password.
I am unable to connect the
Starlight Projector to the
Laser SmartHome App.

TROUBLESHOOTING
• The Laser SmartHome App is only designed
to work on Smartphones and Tablets that use
the Apple App store and the Google Play Store.
Can I use Laser SmartHome
on my computer?
continued...

www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
Visit our website