
1. OVERVIEW
1.1. Instructions
1. This manual is applied to LEDUP type displays. Manual systematically
introduces the product features, specifications, installation and interface.
2. Manual operation instruction is based on built-in NovaLCT-Taurus Series
Multimedia Players.
3. The manual only used for customers to provide proper solutions.
1.2. Safety Notice
1. Please read below safety instructions before installation, power-up,
operation and testing.
2. Make sure to follow the safety instructions, please contact the supplier for any questions.
3. Due to flame, electric shock, fall down, this product may cause injury to person.
4. This product is non-waterproof therefore can not be used in complete
outdoor environments.
5. Please do not block the ventilation holes during operation.
6. Please take moisture-proof measures when packing and stocking.
7. Please do not drop, strike, scratch, wrap or shake LED display or external equipment.
8. Please make sure the product is operated under professional staff due to
inside strong current.
9. Please make sure the ground is flat and before placing the product.
10. Please make sure this product earthed correctly to ensure safety and
prevent electrical shock.
11. Please cut off in lightning weather or make sure taking some lightning
protection measures.
12. Please cut off display power during installation, maintenance, dissasemble.
13. Please make sure the AC power meets local building & electrical standards and
equipped with overload and earth faulty protection.
14. Please check electricity, cable and all connected equipments meet current
requirements before using this product.
15. Please make sure power cable is not damaged. Replace with new one if any
over-heating situation occurs.
16. Product should be operated by professional/authorized personnel only.
Contact with supplier for any questions.
17. Please wear eye-protection during intervention.
18. Please do not block heat ventilation gaps of screen, processor and power supply.
19. Please do not stick any other object on the screen.
20. Please do not intervene without permission of authorized person.
21. Please do not expose the product to sun directly.
Environment tempreture should be less then 45 degrees.
22. Please wear helmet during maintenance and installation.
23. Please make sure connected parts are fully fixed and meet safety standards.
Warning: Manufacturer is not responsible for any unauthorized personnel
intervention and operations.