Lewitt DTP 340 REX User manual

www.lewitt-audio.com
PUT
MORE
IN
YOUR
BOOM
CHA.DTP 340 REX

DTP 340 REX Introduction
Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling
and its proper usage.
With its DTP series, LEWITT introduces a complete family of cutting-edge, high-performance wired dynamic microphones designed
specifically for drums, percussion and bass instruments. These high-quality mics – spear-headed by our masterpiece, the dual-element
cardioid DTP 640 REX optimized for kick drum applications – stand out thanks to their sonic accuracy on stage as well as in studio settings.
Minimally affected by varying load impedance and designed to effectively reject off-axis sound, all models of the DTP series deliver
unparalleled, memorable sound that will turn heads in any audience. Uniform cardioids and super-cardioid patterns allow for high gain before
feedback and a hardened steel mesh grille effectively resists wear and abuse, making DTP microphones and Beat Kits the ultimate choice for
touring professionals.
From professional drummers to discerning beat aficionados, LEWITT’s DTP series lets music lovers and performers alike discover a fine-
tuned, punchy sound.
LEWITT wishes you a lot of fun and success with this product!
02

03
DTP 340 REX The product
The ambitious DTP 340 REX developed for entry-level use and
its upscale big brother designed for professional use, the DTP
640 REX, make the hearts of beat aficionados beat faster.
Thanks to its cardioid polar pattern and customized frequency
response, the dynamic DTP 340 REX offers everything you
need to mic bass instruments: catchy, impressive sound and
reliable performance on stage and in the studio.
Since 2012, the DTP 340 REX offers another innovative
feature. In addition to the accustomed neutral and pure sound
– developed for maximum application diversity –, the
‘Enhanced Frequency Response’ switchable right on the
microphone will deliver an unbeatably impressive sound by
emphasizing frequencies from 70-150 Hz and 3-5 kHz –
especially optimized for use on kick drums.

DTP 340 REX Features / Top applications
Features
Switchable “Enhanced Frequency Response” specifically tailored for a powerful kick drum sound
Perfectly suited for recording bass instruments and percussion
Uniform cardioid pickup pattern for maximum isolation of the main sound source
Outstanding gain before feedback
Rock-solid full metal die-cast body suited for rough daily touring routine
Integrated stand adapter for secure mounting and easy positioning
Corrosion-resistant gold-plated 3-pin XLR output connector
Comes in a cardboard box with foam layers and DTP 40 Lb artificial leather bag
■
■
■
■
■
■
■
■
Top applications
Drums and Percussion // kick drum...
Low frequency instruments // double bass, electric bass, kick drum...
Live and studio applications
■
■
■
04

DTP 340 REX Using the mic
Your mic
① 3-pin XLR jack
② Mic mount
③ Recessed slide switch for ‘Enhanced Frequency Response’
FFR
EFR
②
③
①
05

Using the mic
DTP 340 REX
‘Enhanced Frequency Response’ – EFR
The recessed EFR slide switch allows you to select two different frequency responses.
■③
+ ‘Dynamic Enhanced Frequency Response’ – EFR Dynamic
EFR Dynamic emphasizes frequency ranges relevant for the kick drum sound. Emphasis on frequencies from 70 to 150 Hz delivers a
full body sound and emphasis on frequencies between 3 and 5 kHz ensures an impressive attack.
■
= ‘Flat Frequency Response’ – FFR
FFR is especially suited for recording bass-heavy instruments and for placing the DTP 340 REX outside the kick drum. With the FFR
switch setting , the DTP 340 REX offers a relatively neutral reproduction of sound.
■
06

07
DTP 340 REX Tech data
Tech graph
3 dB / unit
3dB unit /
FFR
EFR
dB ref. 1 V / Pa
dB ref. 1 V / Pa

DTP 340 REX Tech data
127
71
158
Dimensions Tech data
Acoustical operating principle:
Directional pattern:
Frequency range:
EFR, ‘Enhanced Frequency
Response’ settings:
Sensitivity, = FFR:
Sensitivity, + EFR:
Rated impedance:
Connector:
Dimensions:
Net weight:
■
■
■
■
■
■
■
■
■
■
dynamic, moving coil
cardioid
20 ... 16.000 Hz
= FFR, ‘Flat Frequency Response’
+ EFR, ‘Enhanced Frequency Response’
0,4 mV / Pa (-69 dBV)
0,4 mV / Pa (-69 dBV)
< 500 ohms
gold plated 3-pin XLR
71 dia. x 158 mm
2,8 dia. x 6,2 inch
740 g
26,1 oz
08

DTP 340 REX Accessories
DTP 40 Lb
Accessories
09

DTP 340 REX Cautions
Cautions
To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
Keep this product out of the reach of children.
Do not use force on the switch or cable of the microphone.
When disconnecting the microphone cable, grasp the connector and do not pull the cable.
Since the microphone consists of precise parts, do not attempt to modify or fix it. Contact qualified service personnel in case any service
is needed. Do not disassemble or modify the microphone for any reasons as this will void users warranty.
The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
If necessary the foam wind stopper can be washed with soap water. Please wait till it is dry before using it again.
Also please refer to the owner’s manual of the component to be connected to the microphone.
■
■
■
■
■
■
■
■
The capsule is a sensitive, high precision component. Make sure you do not drop it from high places and avoid strong mechanical stress and force.
10

Warranty
All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as
shown on your purchase receipt.
LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion
either by repair or by exchanging individual parts or the entire appliance. Any defective parts removed from a product during the course of a
warranty claim shall become the property of LEWITT GmbH.
While under warranty period, defective products may be returned to the authorized LEWITT dealer together with original proof of purchase. To
avoid any damages in transit, please use the original packaging if available. Please do not send your product to LEWITT GmbH directly as it will
not be serviced. Freight charges have to be covered by the owner of the product.
For further information please visit www.lewitt-audio.com or check your warranty card.
DTP 340 REX Warranty
11

DTP 340 REX Regulatory information
LEWITT GmbH declares under its sole responsibility that
complies with the European directive 2004/108/EC. The product has been
tested according to harmonized European standards:
DTP 340 REX
EN 55013:2001+A1:2003+A2:2006
EN 55020:2007
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
Product testing was carried out by TIMCO Engineering Inc., notified body
number 1177.
LEWITT GmbH hereby declares under its sole responsibility that DTP 340 REX
has been tested and conforms to the following FCC and ANSI standards:
FCC Part 15:2008 Section 15.109
ANSI C63.4:2003
Product testing was carried out by INTERTEK Testing Services Shenzhen Ltd.
WEEE note: Electronic waste has to be collected separately. Please bring
this device to a local recycling center at the end of its life time.
Manufacturers signature:
Date: 18th November 2010 DI Roman Perschon
Place: Vienna, AUSTRIA CEO – Lewitt GmbH
Declaration of conformity can be downloaded at www.lewitt-audio.com or
obtained from [e-mail].
12

Mooslackengasse 17
1190 Vienna
AUSTRIA
[e-mail]
13